"""Shared messages; identifiers and raw command evidence remain language neutral.""" MESSAGES = { "版本符合 Ubuntu 22.04 最低要求；实机兼容性按已测试环境确认": "Version meets the Ubuntu 22.04 minimum; real system compatibility follows tested environments", "支持范围：Ubuntu 22.04 及更新版本。": "Target support: Ubuntu 22.04 and newer.", "已通过 ipify 查询出口地址；入站可达性未确认": "Egress address queried via ipify; inbound reachability unconfirmed", "sshd -T 读取默认配置；权限不足、配置错误或 SSH 运行目录尚未创建均可能导致失败。结果可能与运行中服务或 Match 条件不同。": "sshd -T reads defaults; permissions, configuration or a missing runtime directory can prevent inspection. Running-service and Match settings may differ.", '联网检测 DNS 和 TCP 连接并实时显示结果': 'Run outbound DNS and TCP checks with live output', '网络质量检测：会向系统 DNS、Cloudflare 和 Google 发起请求。': 'Network quality checks: requests will be sent to the system DNS resolver, Cloudflare and Google.', '正在查询 DNS：example.com ...': 'Checking DNS: example.com ...', 'DNS 查询成功：{versions}，耗时 {ms} ms': 'DNS lookup succeeded: {versions}, {ms} ms', '其他': 'other', 'DNS 查询未成功；原因可能是超时、网络或解析器配置，不能确定唯一原因。': 'DNS lookup did not succeed; timeout, network or resolver configuration may be responsible.', '正在测试 {target} TCP {port} ...': 'Testing {target} TCP {port} ...', '{target} TCP 连接成功：{ms} ms': '{target} TCP connection succeeded: {ms} ms', '{target} TCP 连接未成功；原因尚未确定。': '{target} TCP connection did not succeed; the cause is unknown.', '以上结果为本次从此服务器到这些测试目标的连接情况。': 'These results describe this server’s current connection to these targets.', '运行本地 NodeQuality 脚本并实时显示输出': 'Run a local NodeQuality script and stream its output', '已下载并检查的 NodeQuality 脚本路径': 'Path to a locally downloaded and reviewed NodeQuality script', '找不到本地脚本文件': 'Local script file not found', '未找到 bash，无法运行脚本': 'bash was not found; cannot run the script', '无法启动 NodeQuality 脚本': 'Unable to start the NodeQuality script', '即将运行第三方 NodeQuality；其可能下载组件、进行网络及性能测试，并向第三方上传结果。输出可能包含公网 IP。': 'Running third-party NodeQuality; it may download components, run network and performance tests, and upload results to third parties. Output may contain public IP addresses.', 'CPU 信息': 'CPU information', '系统可见逻辑 CPU：{count}': 'Logical CPUs visible to the system: {count}', '逻辑 CPU 数量未知': 'Logical CPU count unknown', '处理器型号：{model}': 'Processor model: {model}', '处理器型号未知': 'Processor model unknown', '逻辑 CPU 数不一定等于物理核心数；配额限制可能不同。': 'Logical CPUs may differ from physical cores and CPU quota limits.', '内核版本': 'Kernel version', '根分区容量': 'Root filesystem capacity', '总容量 {total:.1f} GiB，可用 {free:.1f} GiB': 'Total {total:.1f} GiB, available {free:.1f} GiB', '这是根文件系统容量，不一定等于 VPS 购买的磁盘总容量。': 'This is the root filesystem capacity, which may differ from the purchased disk capacity.', '内存总量': 'Total memory', '系统可见 {total:.0f} MiB': 'Visible to the system: {total:.0f} MiB', '系统可见内存可能与商家标称或容器限额不同。': 'System-visible memory may differ from the advertised amount or container limits.', '服务器信息': 'Server information', '体检结果': 'Diagnostic results', "仅在终端显示完整 IP；保存的报告仍脱敏": "Show full IP addresses only in terminal output; saved reports remain redacted", "终端正在显示完整 IP；保存的报告仍脱敏，分享前请检查内容。": "Full IP addresses are visible in terminal output; saved reports remain redacted. Review before sharing.", "向 ipify 发送 HTTPS 请求查询出口 IP（第三方会看到该地址）": "Query egress IP over HTTPS from ipify (the third party will see this address)", "已通过 ipify 查询出口地址": "Egress address queried via ipify", "出口 IP 查询失败，无法确定公网地址": "Egress IP query failed; the public address is unknown", "出口地址可能是 NAT 或代理地址；不是入站可达性证明。": "The egress address may belong to NAT or a proxy; it does not establish inbound reachability.", "只读体检 · 已请求 ipify 查询出口 IP": "Read-only checks · ipify egress IP lookup requested", "默认路由": "Default route", "路由读取失败或格式无法解析": "Route read failed or output could not be parsed", "已读取默认路由": "Default route read", "默认路由信息不完整或未找到，无法确认网络出口": "Default route information is incomplete or missing; the network exit is unconfirmed", "仅检查当前网络命名空间的默认路由，不覆盖策略路由。": "Only the current network namespace's default routes are checked; policy routing is not covered.", "DNS 配置": "DNS configuration", "无法读取 DNS 配置": "Unable to read DNS configuration", "DNS 配置不完整或没有有效的服务器地址": "DNS configuration is incomplete or has no valid server address", "DNS 指向本机解析器": "DNS points to a local resolver", "已读取 DNS 服务器配置": "DNS server configuration read", "仅检查 resolv.conf，不主动发送 DNS 请求；实际解析路径可能不同。": "Only resolv.conf is inspected; no DNS request is sent, and the actual resolution path may differ.", "SSH 端口保护": "SSH port protection", "sshd 默认配置端口：{ports}": "sshd default configured ports: {ports}", "当前 SSH 会话本地端口：{port}": "Current SSH session local port: {port}", "目标端口与 SSH 已知端口冲突；不要用于代理": "The target port conflicts with a known SSH port; do not use it for the proxy", "未能排除与运行中 SSH 端口冲突": "A conflict with a running SSH port cannot be ruled out", "检查运行中 SSH、socket 激活及自定义实例；证据不足时不要进行端口或防火墙修改。": "Check running SSH, socket activation and custom instances; do not change ports or firewall rules when evidence is insufficient.", "SSH 端口输出不完整或无效": "SSH port output is incomplete or invalid", "输出超过读取上限，不能作为完整检查结果": "Output exceeded the read limit; it cannot be treated as a complete result", "无法读取 Linux 发行版标识，不能确认系统要求": "Unable to read the Linux distribution ID; system requirements are unconfirmed", "SSH 输出缺少关键字段，无法完成风险判断": "SSH output is missing required fields; risk assessment is incomplete", "sing-box 服务处于 failed 状态，需要检查启动失败原因": "sing-box service is in the failed state; investigate the startup failure", "sing-box 开机启动": "sing-box startup at boot", "已配置持久开机启动": "Persistent startup at boot is enabled", "未配置持久开机启动或服务被屏蔽，重启后可能不可用": "Persistent startup is not enabled or the service is masked; it may be unavailable after reboot", "无法确认 sing-box 的持久开机启动状态": "Persistent sing-box startup at boot is unconfirmed", "命令不可用": "Command unavailable", "命令返回非零状态，可能需要读取权限": "Command returned a nonzero status; read permissions may be required", "读取命令失败，可能是权限、配置或服务状态问题": "Read command failed; permissions, configuration or service state may be responsible", "sshd -T 读取默认配置；权限不足、配置错误或 SSH 运行目录尚未创建均可能导致失败。结果可能与运行中服务或 Match 条件不同；不自动修改 SSH。": "sshd -T reads default configuration; it can fail due to permissions, configuration errors or a missing SSH runtime directory. Results may differ from the running service or Match conditions; SSH is not modified.", "读取超时（8 秒）": "Read timed out (8 seconds)", "无法执行读取命令": "Unable to execute read command", "操作系统": "Operating system", "版本符合 Ubuntu 22.04 最低要求": "Version meets the Ubuntu 22.04 minimum", "无法解析 Ubuntu 版本，不能确认是否符合最低要求": "Unable to parse the Ubuntu version; minimum requirement is unconfirmed", "需要 Ubuntu 22.04 或更新版本": "Ubuntu 22.04 or newer is required", "版本未知": "Version unknown", "其他系统的结果仅供参考。": "Results on other systems are informational.", "版本检查 Ubuntu 22.04 及更新版本受支持。": "Ubuntu 22.04 and newer versions are supported.", "系统架构": "Architecture", "检测架构；本阶段不验证安装包兼容性": "Architecture detected; package compatibility is not checked at this stage", "根分区可用空间": "Free space on root filesystem", "可用 {free:.1f} GiB（体检提示阈值 1 GiB）": "{free:.1f} GiB free (advisory threshold: 1 GiB)", "无法读取": "Unable to read", "公网 IP": "Public IP", "用户提供的地址具备公网地址属性": "The supplied address is globally routable", "提供的地址不是全局可路由公网地址": "The supplied address is not a globally routable public address", "默认不向第三方查询出口 IP": "No third-party egress IP lookup is performed by default", "可用 --public-ip 填写云控制台地址；地址归属及入站可达性仍需外部验证。": "Use --public-ip to supply the address from your cloud console; ownership and inbound reachability still need external verification.", "云防火墙与外部可达性": "Cloud firewall and external reachability", "本机读取不能确认云安全组、NAT 或外部网络路径": "Local reads cannot verify cloud security groups, NAT or external network paths", "后续从客户端独立测试；不能仅据此认定端口已开放或被封锁。": "Test independently from a client; this result alone cannot establish whether a port is reachable or blocked.", "内存": "Memory", "网络地址": "Network addresses", "端口占用": "Port usage", "SSH 配置": "SSH configuration", "本机防火墙": "Local firewall", "sing-box 服务": "sing-box service", "此项需要 Linux；当前主机仅验证程序运行": "Requires Linux; this host only validates that the program runs", "可用内存": "Available memory", "约 {mib:.0f} MiB（体检提示阈值 256 MiB）": "About {mib:.0f} MiB (advisory threshold: 256 MiB)", "无法读取 MemAvailable": "Unable to read MemAvailable", "仅表示本机接口地址": "Local interface addresses only", "无法解析接口信息": "Unable to parse interface information", "目标端口占用": "Target port usage", "目标 TCP/UDP 端口 {port} 已有监听": "A listener already uses target TCP/UDP port {port}", "无法完整确认端口占用": "Unable to fully determine port usage", "当前未发现 TCP/UDP 端口 {port} 的监听": "No listener currently found on TCP/UDP port {port}", "选择未占用端口；不会停止已有服务。": "Choose an unused port; existing services will not be stopped.", "允许 root 登录或密码认证": "Root login or password authentication is allowed", "未发现这两项宽松设置": "Neither of these permissive settings was found", "sshd -T 读取默认配置，可能与运行中服务或 Match 条件一致。": "sshd -T reads default configuration, which may differ from the running service or Match conditions.", "读取失败": "Read failed", "已读取；": "Read completed; ", "存在状态或规则信息": "state or rule information exists", "未发现活动状态或规则": "no active state or rules found", "发现防火墙状态或规则；未判断规则是否允许目标端口": "Firewall state or rules found; permission for the target port is not evaluated", "没有足够证据确认防火墙保护状态": "Insufficient evidence to establish firewall protection", "部分工具不可用或权限不足。": "Some tools are unavailable or permissions are insufficient.", "规则存在不等于配置安全。": "The presence of rules does not establish a secure configuration.", "服务处于 active": "Service is active", "未确认 sing-box 服务运行；新系统尚未安装属于正常情况": "sing-box service operation is unconfirmed; absence is expected on a fresh system", "通过": "PASS", "注意": "WARN", "未知": "UNKNOWN", "跳过": "SKIP", "失败": "FAIL", "[IP已隐藏]": "[IP REDACTED]", "VPS 检测工具 只读体检：不修改系统；默认不请求外部网络": "VPSMaster read-only checks: no system changes; no external requests by default", "读取系统信息并生成体检报告": "Read system information and generate a diagnostic report", "拟使用的代理端口，默认 8388": "Intended proxy port (default: 8388)", "云控制台提供的 IP；本工具不验证归属": "IP from your cloud console; ownership is not verified", "输出 JSON（默认隐藏 IP）": "Print JSON (IP addresses are redacted by default)", "另存为脱敏 JSON；已存在的文件不会覆盖": "Save redacted JSON; existing files are never overwritten", "界面和报告语言：zh 中文，en 英文（默认 zh）": "Interface and report language: zh Chinese, en English (default: zh)", "端口必须在 1～65535 之间": "Port must be between 1 and 65535", "--public-ip 必须是有效 IPv4 或 IPv6 地址": "--public-ip must be a valid IPv4 or IPv6 address", "无法保存报告：{error}": "Unable to save report: {error}", "只读体检 · 默认不请求外部网络": "Read-only checks · No external requests by default", "依据": "Evidence", "报告默认隐藏 IP。": "IP addresses are redacted by default.", "参数错误：{message}": "Argument error: {message}", "显示帮助并退出": "Show this help message and exit", "显示版本并退出": "Show version and exit", "命令": "Commands", "选项": "Options", } def translator(lang): if lang not in {"zh", "en"}: raise ValueError("Unsupported language; choose zh or en") def translate(key, **values): text = MESSAGES.get(key, key) if lang == "en" else key return text.format(**values) if values else text return translate