The new '3m-ui reset-config' Go subcommand (commit 8639b01) lets SSH
operators undo panel misconfigurations (wrong port / 127.0.0.1 bind /
broken SSL). This change exposes it through the systemd management
wrapper and documents it in the install banner.
scripts/3m-ui.sh:
- Add 'reset_config' function: stops the panel service (required by
the Go binary since it writes config.yaml + DB rows the running
panel might cache), invokes 3m-ui-bin reset-config <flags>, then
restarts the panel.
- --help / -h short-circuits the stop/restart cycle (read-only).
- Add 'reset-config' to the main case dispatch.
- Document the new subcommand + flags in usage() with examples.
scripts/install.sh:
- Append a line to the post-install banner pointing operators at
'3m-ui reset-config --panel --yes' for SSH rescue scenarios.
USAGE
sudo 3m-ui reset-config # interactive y/N, panel scope
sudo 3m-ui reset-config --panel --yes # scripted rescue (common case)
sudo 3m-ui reset-config --all --yes # full reset
sudo 3m-ui reset-config --help # full help (no service touched)
Smoke-tested with a fake binary: dispatch + flag passthrough + env vars
all correct; --help does not stop the service.
feat(scripts): wire reset-config into 3m-ui CLI wrapper + install hint
The new '3m-ui reset-config' Go subcommand (commit 8639b01) lets SSH
operators undo panel misconfigurations (wrong port / 127.0.0.1 bind /
broken SSL). This change exposes it through the systemd management
wrapper and documents it in the install banner.
scripts/3m-ui.sh:
- Add 'reset_config' function: stops the panel service (required by
the Go binary since it writes config.yaml + DB rows the running
panel might cache), invokes 3m-ui-bin reset-config <flags>, then
restarts the panel.
- --help / -h short-circuits the stop/restart cycle (read-only).
- Add 'reset-config' to the main case dispatch.
- Document the new subcommand + flags in usage() with examples.
scripts/install.sh:
- Append a line to the post-install banner pointing operators at
'3m-ui reset-config --panel --yes' for SSH rescue scenarios.
USAGE
sudo 3m-ui reset-config # interactive y/N, panel scope
sudo 3m-ui reset-config --panel --yes # scripted rescue (common case)
sudo 3m-ui reset-config --all --yes # full reset
sudo 3m-ui reset-config --help # full help (no service touched)
Smoke-tested with a fake binary: dispatch + flag passthrough + env vars
all correct; --help does not stop the service.
feat(scripts): wire reset-config into 3m-ui CLI wrapper + install hint
The new '3m-ui reset-config' Go subcommand (commit 8639b01) lets SSH
operators undo panel misconfigurations (wrong port / 127.0.0.1 bind /
broken SSL). This change exposes it through the systemd management
wrapper and documents it in the install banner.
scripts/3m-ui.sh:
- Add 'reset_config' function: stops the panel service (required by
the Go binary since it writes config.yaml + DB rows the running
panel might cache), invokes 3m-ui-bin reset-config <flags>, then
restarts the panel.
- --help / -h short-circuits the stop/restart cycle (read-only).
- Add 'reset-config' to the main case dispatch.
- Document the new subcommand + flags in usage() with examples.
scripts/install.sh:
- Append a line to the post-install banner pointing operators at
'3m-ui reset-config --panel --yes' for SSH rescue scenarios.
USAGE
sudo 3m-ui reset-config # interactive y/N, panel scope
sudo 3m-ui reset-config --panel --yes # scripted rescue (common case)
sudo 3m-ui reset-config --all --yes # full reset
sudo 3m-ui reset-config --help # full help (no service touched)
Smoke-tested with a fake binary: dispatch + flag passthrough + env vars
all correct; --help does not stop the service.
feat(scripts): wire reset-config into 3m-ui CLI wrapper + install hint
The new '3m-ui reset-config' Go subcommand (commit 8639b01) lets SSH
operators undo panel misconfigurations (wrong port / 127.0.0.1 bind /
broken SSL). This change exposes it through the systemd management
wrapper and documents it in the install banner.
scripts/3m-ui.sh:
- Add 'reset_config' function: stops the panel service (required by
the Go binary since it writes config.yaml + DB rows the running
panel might cache), invokes 3m-ui-bin reset-config <flags>, then
restarts the panel.
- --help / -h short-circuits the stop/restart cycle (read-only).
- Add 'reset-config' to the main case dispatch.
- Document the new subcommand + flags in usage() with examples.
scripts/install.sh:
- Append a line to the post-install banner pointing operators at
'3m-ui reset-config --panel --yes' for SSH rescue scenarios.
USAGE
sudo 3m-ui reset-config # interactive y/N, panel scope
sudo 3m-ui reset-config --panel --yes # scripted rescue (common case)
sudo 3m-ui reset-config --all --yes # full reset
sudo 3m-ui reset-config --help # full help (no service touched)
Smoke-tested with a fake binary: dispatch + flag passthrough + env vars
all correct; --help does not stop the service.
feat(scripts): wire reset-config into 3m-ui CLI wrapper + install hint
The new '3m-ui reset-config' Go subcommand (commit 8639b01) lets SSH
operators undo panel misconfigurations (wrong port / 127.0.0.1 bind /
broken SSL). This change exposes it through the systemd management
wrapper and documents it in the install banner.
scripts/3m-ui.sh:
- Add 'reset_config' function: stops the panel service (required by
the Go binary since it writes config.yaml + DB rows the running
panel might cache), invokes 3m-ui-bin reset-config <flags>, then
restarts the panel.
- --help / -h short-circuits the stop/restart cycle (read-only).
- Add 'reset-config' to the main case dispatch.
- Document the new subcommand + flags in usage() with examples.
scripts/install.sh:
- Append a line to the post-install banner pointing operators at
'3m-ui reset-config --panel --yes' for SSH rescue scenarios.
USAGE
sudo 3m-ui reset-config # interactive y/N, panel scope
sudo 3m-ui reset-config --panel --yes # scripted rescue (common case)
sudo 3m-ui reset-config --all --yes # full reset
sudo 3m-ui reset-config --help # full help (no service touched)
Smoke-tested with a fake binary: dispatch + flag passthrough + env vars
all correct; --help does not stop the service.
feat(scripts): wire reset-config into 3m-ui CLI wrapper + install hint
The new '3m-ui reset-config' Go subcommand (commit 8639b01) lets SSH
operators undo panel misconfigurations (wrong port / 127.0.0.1 bind /
broken SSL). This change exposes it through the systemd management
wrapper and documents it in the install banner.
scripts/3m-ui.sh:
- Add 'reset_config' function: stops the panel service (required by
the Go binary since it writes config.yaml + DB rows the running
panel might cache), invokes 3m-ui-bin reset-config <flags>, then
restarts the panel.
- --help / -h short-circuits the stop/restart cycle (read-only).
- Add 'reset-config' to the main case dispatch.
- Document the new subcommand + flags in usage() with examples.
scripts/install.sh:
- Append a line to the post-install banner pointing operators at
'3m-ui reset-config --panel --yes' for SSH rescue scenarios.
USAGE
sudo 3m-ui reset-config # interactive y/N, panel scope
sudo 3m-ui reset-config --panel --yes # scripted rescue (common case)
sudo 3m-ui reset-config --all --yes # full reset
sudo 3m-ui reset-config --help # full help (no service touched)
Smoke-tested with a fake binary: dispatch + flag passthrough + env vars
all correct; --help does not stop the service.
feat(scripts): wire reset-config into 3m-ui CLI wrapper + install hint
The new '3m-ui reset-config' Go subcommand (commit 8639b01) lets SSH
operators undo panel misconfigurations (wrong port / 127.0.0.1 bind /
broken SSL). This change exposes it through the systemd management
wrapper and documents it in the install banner.
scripts/3m-ui.sh:
- Add 'reset_config' function: stops the panel service (required by
the Go binary since it writes config.yaml + DB rows the running
panel might cache), invokes 3m-ui-bin reset-config <flags>, then
restarts the panel.
- --help / -h short-circuits the stop/restart cycle (read-only).
- Add 'reset-config' to the main case dispatch.
- Document the new subcommand + flags in usage() with examples.
scripts/install.sh:
- Append a line to the post-install banner pointing operators at
'3m-ui reset-config --panel --yes' for SSH rescue scenarios.
USAGE
sudo 3m-ui reset-config # interactive y/N, panel scope
sudo 3m-ui reset-config --panel --yes # scripted rescue (common case)
sudo 3m-ui reset-config --all --yes # full reset
sudo 3m-ui reset-config --help # full help (no service touched)
Smoke-tested with a fake binary: dispatch + flag passthrough + env vars
all correct; --help does not stop the service.
feat(scripts): wire reset-config into 3m-ui CLI wrapper + install hint
The new '3m-ui reset-config' Go subcommand (commit 8639b01) lets SSH
operators undo panel misconfigurations (wrong port / 127.0.0.1 bind /
broken SSL). This change exposes it through the systemd management
wrapper and documents it in the install banner.
scripts/3m-ui.sh:
- Add 'reset_config' function: stops the panel service (required by
the Go binary since it writes config.yaml + DB rows the running
panel might cache), invokes 3m-ui-bin reset-config <flags>, then
restarts the panel.
- --help / -h short-circuits the stop/restart cycle (read-only).
- Add 'reset-config' to the main case dispatch.
- Document the new subcommand + flags in usage() with examples.
scripts/install.sh:
- Append a line to the post-install banner pointing operators at
'3m-ui reset-config --panel --yes' for SSH rescue scenarios.
USAGE
sudo 3m-ui reset-config # interactive y/N, panel scope
sudo 3m-ui reset-config --panel --yes # scripted rescue (common case)
sudo 3m-ui reset-config --all --yes # full reset
sudo 3m-ui reset-config --help # full help (no service touched)
Smoke-tested with a fake binary: dispatch + flag passthrough + env vars
all correct; --help does not stop the service.
feat(scripts): wire reset-config into 3m-ui CLI wrapper + install hint
The new '3m-ui reset-config' Go subcommand (commit 8639b01) lets SSH
operators undo panel misconfigurations (wrong port / 127.0.0.1 bind /
broken SSL). This change exposes it through the systemd management
wrapper and documents it in the install banner.
scripts/3m-ui.sh:
- Add 'reset_config' function: stops the panel service (required by
the Go binary since it writes config.yaml + DB rows the running
panel might cache), invokes 3m-ui-bin reset-config <flags>, then
restarts the panel.
- --help / -h short-circuits the stop/restart cycle (read-only).
- Add 'reset-config' to the main case dispatch.
- Document the new subcommand + flags in usage() with examples.
scripts/install.sh:
- Append a line to the post-install banner pointing operators at
'3m-ui reset-config --panel --yes' for SSH rescue scenarios.
USAGE
sudo 3m-ui reset-config # interactive y/N, panel scope
sudo 3m-ui reset-config --panel --yes # scripted rescue (common case)
sudo 3m-ui reset-config --all --yes # full reset
sudo 3m-ui reset-config --help # full help (no service touched)
Smoke-tested with a fake binary: dispatch + flag passthrough + env vars
all correct; --help does not stop the service.
feat(scripts): wire reset-config into 3m-ui CLI wrapper + install hint
The new '3m-ui reset-config' Go subcommand (commit 8639b01) lets SSH
operators undo panel misconfigurations (wrong port / 127.0.0.1 bind /
broken SSL). This change exposes it through the systemd management
wrapper and documents it in the install banner.
scripts/3m-ui.sh:
- Add 'reset_config' function: stops the panel service (required by
the Go binary since it writes config.yaml + DB rows the running
panel might cache), invokes 3m-ui-bin reset-config <flags>, then
restarts the panel.
- --help / -h short-circuits the stop/restart cycle (read-only).
- Add 'reset-config' to the main case dispatch.
- Document the new subcommand + flags in usage() with examples.
scripts/install.sh:
- Append a line to the post-install banner pointing operators at
'3m-ui reset-config --panel --yes' for SSH rescue scenarios.
USAGE
sudo 3m-ui reset-config # interactive y/N, panel scope
sudo 3m-ui reset-config --panel --yes # scripted rescue (common case)
sudo 3m-ui reset-config --all --yes # full reset
sudo 3m-ui reset-config --help # full help (no service touched)
Smoke-tested with a fake binary: dispatch + flag passthrough + env vars
all correct; --help does not stop the service.
feat(scripts): wire reset-config into 3m-ui CLI wrapper + install hint
The new '3m-ui reset-config' Go subcommand (commit 8639b01) lets SSH
operators undo panel misconfigurations (wrong port / 127.0.0.1 bind /
broken SSL). This change exposes it through the systemd management
wrapper and documents it in the install banner.
scripts/3m-ui.sh:
- Add 'reset_config' function: stops the panel service (required by
the Go binary since it writes config.yaml + DB rows the running
panel might cache), invokes 3m-ui-bin reset-config <flags>, then
restarts the panel.
- --help / -h short-circuits the stop/restart cycle (read-only).
- Add 'reset-config' to the main case dispatch.
- Document the new subcommand + flags in usage() with examples.
scripts/install.sh:
- Append a line to the post-install banner pointing operators at
'3m-ui reset-config --panel --yes' for SSH rescue scenarios.
USAGE
sudo 3m-ui reset-config # interactive y/N, panel scope
sudo 3m-ui reset-config --panel --yes # scripted rescue (common case)
sudo 3m-ui reset-config --all --yes # full reset
sudo 3m-ui reset-config --help # full help (no service touched)
Smoke-tested with a fake binary: dispatch + flag passthrough + env vars
all correct; --help does not stop the service.
feat(scripts): wire reset-config into 3m-ui CLI wrapper + install hint
The new '3m-ui reset-config' Go subcommand (commit 8639b01) lets SSH
operators undo panel misconfigurations (wrong port / 127.0.0.1 bind /
broken SSL). This change exposes it through the systemd management
wrapper and documents it in the install banner.
scripts/3m-ui.sh:
- Add 'reset_config' function: stops the panel service (required by
the Go binary since it writes config.yaml + DB rows the running
panel might cache), invokes 3m-ui-bin reset-config <flags>, then
restarts the panel.
- --help / -h short-circuits the stop/restart cycle (read-only).
- Add 'reset-config' to the main case dispatch.
- Document the new subcommand + flags in usage() with examples.
scripts/install.sh:
- Append a line to the post-install banner pointing operators at
'3m-ui reset-config --panel --yes' for SSH rescue scenarios.
USAGE
sudo 3m-ui reset-config # interactive y/N, panel scope
sudo 3m-ui reset-config --panel --yes # scripted rescue (common case)
sudo 3m-ui reset-config --all --yes # full reset
sudo 3m-ui reset-config --help # full help (no service touched)
Smoke-tested with a fake binary: dispatch + flag passthrough + env vars
all correct; --help does not stop the service.
Z User
00249cd168