 yetone
|
dd70a4055a
|
wsl: OpenCode, Kimi Code, omp and the other CLIs magpie sets up through a file in the home are set up in WSL distros too (#515: on Windows only Codex, Pi, OmO and Claude Code were found in a distro) — fourteen agents join wslKinds, each found by its folder under the distro's $HOME or its command on the distro's own PATH, and listed as <name> · WSL <distro> (opencode@wsl:Ubuntu…): OpenCode (~/.config/opencode, opencode), MiMo Code (~/.config/mimocode, mimo), Kimi Code (~/.kimi-code, kimi; the old kimi-cli's ~/.kimi where that is all there is, found by the command), omp (~/.omp/agent, omp), Crush (~/.config/crush/crush.json, Linux's place, not Windows' LOCALAPPDATA), Hermes Agent (~/.hermes), Grok Build (~/.grok, by its folder alone, as on this machine), Droid (~/.factory), fx (~/.fx, by its folder alone: fx is also the JSON viewer), Command Code (~/.commandcode), MiniMax Code's mcode (~/.minimax), Muse Code (~/.config/muse), Qoder and Qoder CN (~/.qoder, ~/.qoder-cn). Each is its host constructor at a place (opencodeIn, kimiIn, ompIn, crushIn, hermesIn, grokIn, droidIn, fxIn, commandCodeIn, miniMaxIn, museIn, qoderIn/qoderCNIn; the host's opencode(home, cfg) and the rest wrap them), so it writes the same keys and schema as on this machine, but the gateway as the distro reaches it (place.gw/v1: 127.0.0.1 when mirrored, Windows' address under NAT) in its provider, its Check and its Sync, and its folder at the default, as the distro's variables (OPENCODE_CONFIG_DIR, KIMI_CODE_HOME, HERMES_HOME, FACTORY_HOME_OVERRIDE, MINIMAX_DATA_DIR, QODER_CONFIG_DIR…) aren't read (place.getenv is "" there); OpenChamber, a Windows app, isn't looked at for a distro's OpenCode, and omp there, whose version isn't known, gets xhigh rather than a max an older omp refuses. Their notices are the restart advice of their own, as for Codex. A stopped distro's agent is built without looking at its files (place.cold: exists/isDir are false, so the defaults are taken), its options read none (wslOwnAsleep, kimiOwnOptions/ompOwnOptions/miniMaxOwnOptions without a file), and a pick, once the distro is started, builds the agent again warm, so it writes the file the agent reads — an opencode.jsonc already there, ~/.kimi for kimi-cli — not the default. Left out: Gemini CLI and Antigravity (a key lent through .env, a launch command), dsh (profiles and .env), Devin (no gateway; its model list from the devin command on this machine), Goose (no magpie routing; its name is pressly's goose too), Cursor and Copilot (no magpie routing), and the apps (Cline, Hanako, WorkBuddy, ZCode, Claude Desktop, OpenChamber, Alma, Cindy); and the library's skills, MCP and instructions for the new WSL agents, which wslTargetOf still gives only Claude Code, Codex, Pi and OmO. Nothing ran on Windows or in a real WSL. wsl_more_test.go, on fake distro roots under temp dirs with the host's variables pointed elsewhere: TestWSLProbeFindsMoreAgents (each folder and command in the probe, none for grok and fx, kimi-cli by its command), TestWSLMoreAgentsDiscovered (all fourteen listed, no command, UA or aliases), TestWSLMoreAgentsPick (each agent, mirrored and NAT: its file in the distro names the distro's gateway, no 127.0.0.1 under NAT, Check passes, Sync keeps it, the notice; this machine's home and the folders its variables name untouched), TestWSLMoreAgentsStopped (nothing asked nor opened, the last value shown, options, a pick starts the distro and writes there) fail without the change; TestWSLStoppedPickFindsItsFiles fails without the warm rebuild (the pick wrote a second opencode.json beside the .jsonc). go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build and vet ./internal/..., GOOS=windows go test -c ./internal/agent/ ./internal/library/, and go test -tags nogui -count=1 ./... under a temp HOME pass (TestFXInState failed once on its TempDir cleanup race, passes on the rerun; untouched).
|
2026-10-02 14:16:38 +08:00 |
|
|
yetone
|
6694108bf2
|
agent: an agent whose own config keeps the reasoning effort its sessions start with gets an effort field, as Codex, Grok and Pi have — Claude Code's effortLevel (low to xhigh; max lasts a session only), Hermes's agent.reasoning_effort, omp's defaultThinkingLevel, Goose's GOOSE_THINKING_EFFORT, Copilot's effortLevel (the model's levels when its list says), Crush's large model reasoning_effort, Command Code's reasoningEffort for the current model (it keeps one per model) and dsh's llm-deepseek reasoningEffort (off, high or max, kept when the model changes or the catalog syncs); OpenCode, Gemini CLI, Cursor, ZCode, Devin and Alma keep none of their own in a file, so they get none. Asked on Discord
|
2026-09-26 23:29:40 +08:00 |
|
|
yetone
|
73be42eca8
|
models: each agent can be shown only some of them — a provider or group gets a family (magpie provider set relay-x family=relay), and magpie visible zcode relay shows zcode only that family's models (or named providers and groups): in the files magpie writes for it and in what /v1/models answers it, told apart by its User-Agent; magpie models zcode lists what it is shown and what is kept from it, and magpie visible zcode all shows it everything again. A model kept from an agent is still served when asked for by name. Asked for on Discord
|
2026-09-26 16:02:29 +08:00 |
|
|
yetone
|
1b5d1f87db
|
agent: every agent on a magpie model says when it was taken off magpie behind its back, not only Codex — each checks what magpie wired into it to reach the gateway (Claude Code's env base URL and token, and a managed-settings base URL that wins over them; Gemini CLI's .env and its auth type; OpenCode, Pi, Crush, Command Code, Hermes, omp and Grok Build's magpie provider; DeepSeek Harness's llm-deepseek entry and its key in .env), and one pointed elsewhere or gone shows Apply again with what is off in its tooltip; Claude Code, like Codex, is also said to be bypassed when it was used and nothing of it reached the gateway (its history.jsonl), and slash commands no longer count as use. A test takes every such agent off the gateway and back
|
2026-09-26 01:10:40 +08:00 |
|
|
yetone
|
09c635cf03
|
agents: a model through magpie tells Pi, Crush, omp and Codex how much it holds, and a provider added, edited or removed reaches the model lists agents keep in files of their own — the catalog carried no context window, so Pi took every model through magpie for a 128K one (a CLIProxyAPI's gpt-5.5 holds 922K) and Crush for a 200K one; each model now carries models.dev's input limit, else its context, looked up by bare id as most of the providers serving it give it (a proxy's "openai/gpt-5.4", "gpt-5.4(high)", "glm-4.6:free" find it too; a group holds the least of its members'). And those lists were written only when a model was picked: Codex's magpie-models.json, Pi's models.json, OpenCode's, Crush's, Command Code's, omp's and Hermes' provider blocks and dsh's llm-deepseek entry kept the catalog as it was then, so a provider added later never showed. Saving a provider, a vendor's list fetched anew or models.dev synced now rewrites each one magpie wrote, where it differs, and the app does once at start-up; a Codex signed in to ChatGPT, which asks the gateway, kept its cached list under the backend's ETag, which a change of magpie's never changed — the ETag (and a reply's X-Models-Etag) now carries a tag of magpie's models, and a cache from before a change is aged so the next Codex asks again
|
2026-09-25 12:32:14 +08:00 |
|
|
yetone
|
a9e1a6769a
|
agent + usage: each agent says what its User-Agent begins with, beside its name and icon, and the gateway tells requests apart by that — usage kept a list of its own, which had to be kept in step with the agents by hand and wasn't (DeepSeek Harness, omp and Command Code were missing from it, so they were drawn with no logo); a new agent is now known by its requests as soon as it is described
|
2026-09-25 05:51:32 +08:00 |
|
|
yetone
|
be1b3967f4
|
agent: Command Code — its model picked in magpie like any agent's; a model through magpie adds magpie as a keyless provider in ~/.commandcode/providers.json with the catalog as its models, and sets settings.json's model to magpie/<provider>/<model>; its own models stay as they are, and default takes magpie's entry out; Command Code still wants its own sign-in (#32)
|
2026-09-24 21:44:09 +08:00 |
|