magpie

agent

workbuddy: a model the plan serves free says so (这个应该是Workbuddy国际版免费的模型，要不要在模型名字后面加上一个免费标记？) — WorkBuddy's product config gives each model the credits a request costs, as its own picker shows them: WorkBuddy AI's deepseek-v4.1-flash is "x0.00", its -sg twin "x0.03", GPT-5.5 "x1.00". A model at x0.00 (or 0) is now Free in the catalog, and carries it to the provider editor's model chips and every agent's model picker, where it has a green 免费/free badge after its name ("free: it doesn't use the plan's credits" on hover); a rate that can't be read is not free. Both WorkBuddy sites, as they share the config. A list fetched before this has no rates: Refresh in the editor asks again. Checked: the credits parse (x0.00, 0 free; x0.03, x1.00, none not), and the badge on a chip and in the picker in the sandbox, dark

2026-09-29 03:02:34 +08:00

autostart

autostart: on Windows, Open at login switched off in Task Manager's Startup apps reads as off, and switching it on in magpie switches it on there again

2026-09-27 12:53:16 +08:00

backup

agent: on Windows, Codex installed in a WSL distro is an agent of its own, codex@wsl:<distro> ("Codex · WSL Ubuntu") — the distros are listed with wsl.exe -l -q (UTF-16LE, or UTF-8 under WSL_UTF8), each asked once through proc for its $HOME, its ~/.codex, a codex on its PATH and its default route, and shown only where Codex is; its files are Codex's own reading and writing (codexIn, at a place rather than a home) through \\wsl.localhost\<distro> (\\wsl$ before that), with the catalog path written in as the distro spells it and what was there stashed under the distro's agent; the gateway written in is 127.0.0.1 when .wslconfig has networkingMode=mirrored and otherwise the Windows host by the distro's default route, with a notice that NAT needs the gateway beyond loopback and through Windows' firewall and that mirrored is the way; its requests stay counted as Codex's, and a profile key is split at its last dot for distro names like Ubuntu-24.04. Nothing runs off Windows. Kimi CLI isn't an agent magpie has yet, so there is no Kimi in WSL. Tested on a Windows box under NAT with a throwaway Alpine distro: detected (the real distros without Codex left out), a magpie model set and reset from the CLI and a test binary, the catalog read inside WSL at /root/.codex; mirrored networking tested only in unit tests

2026-09-28 17:22:30 +08:00

catalog

workbuddy: a model the plan serves free says so (这个应该是Workbuddy国际版免费的模型，要不要在模型名字后面加上一个免费标记？) — WorkBuddy's product config gives each model the credits a request costs, as its own picker shows them: WorkBuddy AI's deepseek-v4.1-flash is "x0.00", its -sg twin "x0.03", GPT-5.5 "x1.00". A model at x0.00 (or 0) is now Free in the catalog, and carries it to the provider editor's model chips and every agent's model picker, where it has a green 免费/free badge after its name ("free: it doesn't use the plan's credits" on hover); a rate that can't be read is not free. Both WorkBuddy sites, as they share the config. A list fetched before this has no rates: Refresh in the editor asks again. Checked: the credits parse (x0.00, 0 free; x0.03, x1.00, none not), and the badge on a chip and in the picker in the sandbox, dark

2026-09-29 03:02:34 +08:00

claudebridge

gateway: a Grok subscription (SuperGrok, X Premium+) works like a Cursor one — magpie runs the signed-in Grok Build CLI in a home of its own (none of the user's hooks, skills, rules or MCP servers; only search_tool/use_tool, reaching magpie's MCP tools), borrowing the user's token through magpie grok-token without touching their sign-in; the add sheet has a Grok tile that signs in with grok login's device code

2026-09-24 17:35:36 +08:00

codexcat

codex: /fast works on a routing group too — a group with a ChatGPT account's GPT model in it is listed to Codex with the Fast tier, and the service_tier Codex then sends is kept through the group's routing and passed on to OpenAI's own backends (a ChatGPT account, api.openai.com) only; before, the request was rebuilt without it and Fast did nothing

2026-09-27 17:51:38 +08:00

davsync

cli: 新增 magpie webdav，在终端里开启、修改和触发 WebDAV 同步 / add magpie webdav to turn on, change and run WebDAV sync from the terminal (#127 )

2026-09-28 14:54:04 +08:00

edit

gui: the Agents and Providers pages open at once again — the Providers page worked out each agent's model and routing group again for every provider (every provider's models read again each time, Alma asked over HTTP each time), so it took 25s with many providers; now once per page. What is parsed from a file is kept until the file changes (Codex's models cache, the vendors' model lists, ~/.claude.json's account, and an agent's TOML config — Codex's can run to megabytes of trusted projects, and was parsed again for every field); and what Alma answers when magpie only shows what it is on is reused for five seconds, as its providers take most of a second each time, while a change and what it reads first still ask Alma. /api/providers 25s → 0.02s, /api/state 7s → 0.1s

2026-09-26 22:25:28 +08:00

filememo

gui: the Agents and Providers pages open at once again — the Providers page worked out each agent's model and routing group again for every provider (every provider's models read again each time, Alma asked over HTTP each time), so it took 25s with many providers; now once per page. What is parsed from a file is kept until the file changes (Codex's models cache, the vendors' model lists, ~/.claude.json's account, and an agent's TOML config — Codex's can run to megabytes of trusted projects, and was parsed again for every field); and what Alma answers when magpie only shows what it is on is reused for five seconds, as its providers take most of a second each time, while a change and what it reads first still ask Alma. /api/providers 25s → 0.02s, /api/state 7s → 0.1s

2026-09-26 22:25:28 +08:00

gateway

gateway: keep one Chat choice when translating, including relay indexes (#168 )

2026-09-29 04:39:52 +08:00

gui

settings: About's Community row links the GitHub repo beside Discord (#124 : 这里能不能再加上tg群或者github的仓库链接，dis根本没啥人用感觉) — a GitHub button, next to Join Discord, opens github.com/yetone/magpie, where issues are filed and the code is; the row now says questions, ideas and feedback go on Discord or GitHub. There is no Telegram group, so none is linked. Checked in a sandbox magpie web, light and dark, and hovered

2026-09-29 08:36:10 +08:00

imagemcp

images: agents can generate and edit images with a model set in Magpie (让Magpie支持配置图像识别模型以及生图模型, part 2) — the gateway answers /v1/images/generations and /v1/images/edits for any model that draws: an images-API model (gpt-image-1, dall-e, imagen, a relay's) is sent the vendor's own images request (an edit as multipart, image[] per reference); a chat model that answers with images (OpenRouter's Nano Banana and GPT-5 Image, gpt-5-image) is asked with modalities ["image","text"], the size given as an aspect ratio, once per image asked for; Gemini's own image models over generateContent. Either way the answer is the images API's (b64_json with its mime_type, the model's text, usage), recorded in usage like any request. The model is Settings → Images → Image generation: Automatic (a model that draws among the providers set up, from the catalog's image-output models), Off, or any model; a request that names none is drawn by it, and with it Off is refused saying where to set one. Subscriptions draw nothing yet. magpie mcp image is a stdio MCP server with one tool, generate_image (prompt, size, n, path, reference_images): it asks the agent for its roots, saves each image in the project (assets/ by default, a name from the prompt, never over a file, the extension of what came back — a JPEG asked for as hero.png is hero.jpg), and says where; reference images are read from the project and sent as an edit. Its requests carry the agent's own name (claude-code/… magpie-image/1) so usage says which agent drew. Library → MCP servers → Discover has it as Magpie Image, opt-in: no agent is given it until picked, since every image costs what the model charges. Checked in a sandbox HOME against real vendors: OpenRouter's gemini-3.1-flash-lite-image drew a 3:2 magpie over MCP as Claude Code and edited it from the saved file as Codex (usage: claude, codex), AIHubMix's gpt-image-1 answered /v1/images/generations with a 1024² PNG; the Settings row and picker in light and dark, the Library card and its opt-in sheet

2026-09-29 01:52:53 +08:00

library

images: agents can generate and edit images with a model set in Magpie (让Magpie支持配置图像识别模型以及生图模型, part 2) — the gateway answers /v1/images/generations and /v1/images/edits for any model that draws: an images-API model (gpt-image-1, dall-e, imagen, a relay's) is sent the vendor's own images request (an edit as multipart, image[] per reference); a chat model that answers with images (OpenRouter's Nano Banana and GPT-5 Image, gpt-5-image) is asked with modalities ["image","text"], the size given as an aspect ratio, once per image asked for; Gemini's own image models over generateContent. Either way the answer is the images API's (b64_json with its mime_type, the model's text, usage), recorded in usage like any request. The model is Settings → Images → Image generation: Automatic (a model that draws among the providers set up, from the catalog's image-output models), Off, or any model; a request that names none is drawn by it, and with it Off is refused saying where to set one. Subscriptions draw nothing yet. magpie mcp image is a stdio MCP server with one tool, generate_image (prompt, size, n, path, reference_images): it asks the agent for its roots, saves each image in the project (assets/ by default, a name from the prompt, never over a file, the extension of what came back — a JPEG asked for as hero.png is hero.jpg), and says where; reference images are read from the project and sent as an edit. Its requests carry the agent's own name (claude-code/… magpie-image/1) so usage says which agent drew. Library → MCP servers → Discover has it as Magpie Image, opt-in: no agent is given it until picked, since every image costs what the model charges. Checked in a sandbox HOME against real vendors: OpenRouter's gemini-3.1-flash-lite-image drew a 3:2 magpie over MCP as Claude Code and edited it from the saved file as Codex (usage: claude, codex), AIHubMix's gpt-image-1 answered /v1/images/generations with a 1024² PNG; the Settings row and picker in light and dark, the Library card and its opt-in sheet

2026-09-29 01:52:53 +08:00

netproxy

windows: the desktop app no longer opens a console window for every command it runs (#54 ) — it is linked as a GUI program and has no console, so each console CLI it started (devin auth status and models list, devin acp for every Devin turn, claude, codex, cursor-agent and grok probes and runs, grok login) was given a new console by Windows, and a Windows Terminal window with it, some every few seconds while the app sat idle. Every command magpie runs is now made through internal/proc, which starts it with CREATE_NO_WINDOW when magpie has no console of its own: the child gets a console without a window, and its output, which magpie always pipes back, arrives as before. A magpie run in a terminal (magpie serve, the TUI, the desktop app started from one with a command) has one, and its children share it as they did, so Ctrl+C there still reaches them. The relaunch after an update keeps its DETACHED_PROCESS, added to rather than replacing the flags it was made with, and a test fails on any command made with os/exec directly, so a new one can't bring the windows back

2026-09-25 14:04:44 +08:00

proc

accounts: a slow or hanging agent CLI no longer holds the providers page (#123 ) — its timeout now ends the call (a CLI that is a script running node left node holding the output, and the call waited for it however long, the 10s timeouts notwithstanding: a CLI's pipes are closed 2s after); a CLI never answered before is waited for 3s, once, then served as nobody signed in until its answer comes behind; and a CLI saying nobody is signed in is kept like any answer, where before it wasn't and every start waited for it again. Tried with cursor-agent and devin hanging 20s and the network black-holed: the first providers call went from 40.6s to 6s on a first start, and to 13ms on the next

2026-09-28 11:20:14 +08:00

profile

agent: on Windows, Codex installed in a WSL distro is an agent of its own, codex@wsl:<distro> ("Codex · WSL Ubuntu") — the distros are listed with wsl.exe -l -q (UTF-16LE, or UTF-8 under WSL_UTF8), each asked once through proc for its $HOME, its ~/.codex, a codex on its PATH and its default route, and shown only where Codex is; its files are Codex's own reading and writing (codexIn, at a place rather than a home) through \\wsl.localhost\<distro> (\\wsl$ before that), with the catalog path written in as the distro spells it and what was there stashed under the distro's agent; the gateway written in is 127.0.0.1 when .wslconfig has networkingMode=mirrored and otherwise the Windows host by the distro's default route, with a notice that NAT needs the gateway beyond loopback and through Windows' firewall and that mirrored is the way; its requests stay counted as Codex's, and a profile key is split at its last dot for distro names like Ubuntu-24.04. Nothing runs off Windows. Kimi CLI isn't an agent magpie has yet, so there is no Kimi in WSL. Tested on a Windows box under NAT with a throwaway Alpine distro: detected (the real distros without Codex left out), a magpie model set and reset from the CLI and a test binary, the catalog read inside WSL at /root/.codex; mirrored networking tested only in unit tests

2026-09-28 17:22:30 +08:00

provider

workbuddy: a model the plan serves free says so (这个应该是Workbuddy国际版免费的模型，要不要在模型名字后面加上一个免费标记？) — WorkBuddy's product config gives each model the credits a request costs, as its own picker shows them: WorkBuddy AI's deepseek-v4.1-flash is "x0.00", its -sg twin "x0.03", GPT-5.5 "x1.00". A model at x0.00 (or 0) is now Free in the catalog, and carries it to the provider editor's model chips and every agent's model picker, where it has a green 免费/free badge after its name ("free: it doesn't use the plan's credits" on hover); a rate that can't be read is not free. Both WorkBuddy sites, as they share the config. A list fetched before this has no rates: Refresh in the editor asks again. Checked: the credits parse (x0.00, 0 free; x0.03, x1.00, none not), and the badge on a chip and in the picker in the sandbox, dark

2026-09-29 03:02:34 +08:00

redact

gateway: count_tokens counts the masked prompt, and a count that cannot be had is told apart — the count Claude Code asks for before every turn went to the vendor as the conversation was written, so Mask secrets was defeated on every one; it now goes masked, the same prompt the turn it counts sends. An endpoint that doesn't implement counting (404/405/501, or a 400 that says so, in English or Chinese) falls back to the local estimate as before; a limited key or a broken connection yields to the next checked key and rests the one that failed, as a generation would, while a client's own cancellation rests nothing; and a real error — a wrong key, a prompt past the model's context, an image it won't take — reaches the agent. The gateway tests are isolated from the machine now (a temp HOME, inert stubs for the sign-in CLIs and the keychain) so a cache that outlives a test can't reach a real login, and the redaction tests' cold starts run in parallel. (#103 )

2026-09-27 18:58:23 +08:00

sessions

sessions: OpenCode v2's sessions are read (Kumo31: opencode v2的session改写到新表里了) — OpenCode 2 (v2.0.x, checked against v2.0.18's source) keeps sessions in the same opencode.db but in tables of its own (packages/core/src/session/sql.ts): session_v2 (the session row as before — directory, parent_id, a title that may now be null, time_created/updated, model {id, providerID, variant}, session totals) and session_message (id, session_id, type, seq, time_created/updated, data), not "sessionmessage". A message's kind is its type column (user, assistant, synthetic, system, compaction, idle, …); a user message's data is its prompt {text, files, …} with no part rows; an assistant's has model {id, providerID, variant}, content (text/reasoning/tool), cost, tokens {input, output, reasoning, cache {read, write}} and time {created, completed} (packages/schema/src/session-message.ts, token-usage.ts), counted as before: input without the cache, output without the reasoning (core/src/session/usage.ts). A compaction carries its own tokens, counted on its model, else the one last replied with. On first start OpenCode 2 copies every old session over (core/src/database/v1-migration.bun.ts), leaving session/message/part unwritten and recording kv migration.v1-v2 {"phase":"completed"}; so with session_v2 present only it is read once that is recorded (or no old table is left, as for the pre-split v2 databases it renamed in place), and while the copy is under way an old session not yet in session_v2 is read from the old tables — never both, so nothing counts twice and a session deleted in v2 doesn't come back. Resume stays opencode --session <ses…> (cli/src/commands/commands.ts). Tested with a v2 fixture made in the test from SQL beside stale old tables; the old-table and JSON-file tests still pass.

2026-09-29 00:38:10 +08:00

settings

images: agents can generate and edit images with a model set in Magpie (让Magpie支持配置图像识别模型以及生图模型, part 2) — the gateway answers /v1/images/generations and /v1/images/edits for any model that draws: an images-API model (gpt-image-1, dall-e, imagen, a relay's) is sent the vendor's own images request (an edit as multipart, image[] per reference); a chat model that answers with images (OpenRouter's Nano Banana and GPT-5 Image, gpt-5-image) is asked with modalities ["image","text"], the size given as an aspect ratio, once per image asked for; Gemini's own image models over generateContent. Either way the answer is the images API's (b64_json with its mime_type, the model's text, usage), recorded in usage like any request. The model is Settings → Images → Image generation: Automatic (a model that draws among the providers set up, from the catalog's image-output models), Off, or any model; a request that names none is drawn by it, and with it Off is refused saying where to set one. Subscriptions draw nothing yet. magpie mcp image is a stdio MCP server with one tool, generate_image (prompt, size, n, path, reference_images): it asks the agent for its roots, saves each image in the project (assets/ by default, a name from the prompt, never over a file, the extension of what came back — a JPEG asked for as hero.png is hero.jpg), and says where; reference images are read from the project and sent as an edit. Its requests carry the agent's own name (claude-code/… magpie-image/1) so usage says which agent drew. Library → MCP servers → Discover has it as Magpie Image, opt-in: no agent is given it until picked, since every image costs what the model charges. Checked in a sandbox HOME against real vendors: OpenRouter's gemini-3.1-flash-lite-image drew a 3:2 magpie over MCP as Claude Code and edited it from the saved file as Codex (usage: claude, codex), AIHubMix's gpt-image-1 answered /v1/images/generations with a 1024² PNG; the Settings row and picker in light and dark, the Library card and its opt-in sheet

2026-09-29 01:52:53 +08:00

shortcut

app: Magpie is in the Start menu on Windows (#158 : Windows 便携版首次运行后，无法在开始菜单 / 系统搜索中找到 Magpie — @Aimer779) — the Windows build is one portable exe with no installer, so nothing put it anywhere Windows search looks. Each start of the desktop app (not the CLI, TUI or serve) now makes sure %APPDATA%\Microsoft\Windows\Start Menu\Programs\Magpie.lnk (the Programs known folder) opens the exe it runs as, symlinks resolved, in its folder, with its icon and "Magpie" as its description; one that already does is left be, one for where the exe was before it was moved is pointed here again. It is the shell's own link, made through WScript.Shell with go-ole (already in the build through Wails, now a direct require), in the background beside the magpie:// registration, and a failure is only logged. An update replaces the exe in place, so the shortcut stays good; a magpie left running from magpie.exe.old(-N) (or .new) points it at magpie.exe, never at what was moved aside. HKCU App Paths\magpie.exe is set to the exe (and its folder) so Win+R magpie opens it too. No uninstall entry, nothing copied. MAGPIE_NO_SHORTCUT=1 skips it (tests, sandboxes); other systems do nothing. Tested with the Windows test built here and run on Windows 11: a shortcut made, left as it was on a second start, pointed at the moved exe. Run on Windows 11 as the desktop app: the shortcut made with the exe's folder and icon, pointed anew after the exe moved, left as it was on a start with nothing changed; App Paths set

2026-09-28 22:44:36 +08:00

stats

stats: magpie counts its users — once a day a running app or magpie serve sends PostHog (the Magpie project) one "magpie active" event under a random id made up on this computer (~/.config/magpie/install-id), with the version, the system and the architecture and nothing else, no person profile kept; off in Settings → Privacy → Count me as a user, or with DO_NOT_TRACK=1 or MAGPIE_NO_STATS=1, and never from a build from source; the README says what goes

2026-09-28 17:23:41 +08:00

tui

providers: a provider can be switched off, kept with its keys but out of every agent's list (希望服务商可以有一个开关按钮，关闭后不再写入模型) — a provider whose quota ran out could only be removed, losing its key and settings, or left in, its models still written into the agents and requests still sent to it. Now each provider (a signed-in account too) has a switch on its row in Providers and in its editor's header; off, the row is dimmed and says Switched off (已关闭), its models leave the catalog, so the model lists magpie writes into agents' files are rewritten without them as after any provider edit, and it is left out of routing groups, fallbacks, the Automatic image, vision and search picks, the routing pools and balance and usage polling. A request naming one of its models is answered 404 saying the provider is switched off in Magpie, not that the model is unknown. Switched on, all of it comes back. Saving the provider from its editor keeps it off; magpie provider off|on <id> and the TUI's o do the same. Tested: an off provider's models are not in the catalog or served, a group with it routes to the member left, a fallback to it is not tried, a request for it is refused as switched off, and turned on it is listed and answers again; an account's off is kept. Checked the Providers page in a sandbox HOME in light and dark: switching a row off and on, the editor's switch and its note

2026-09-29 02:49:36 +08:00

update

web: magpie web knows its version and updates itself as the app does — the badge's restart puts the new version in and runs it in the old one's place with the same arguments and key, so the open page reloads onto it (#111 ); routing: a gateway served by magpie serve, which has no window, is told apart from another magpie's window, and the routing view says to stop it so this magpie serves the gateway and shows routing live (#110 )

2026-09-27 19:39:45 +08:00

usage

routing: a request shows the reasoning its model was actually sent at (显示意图路由实际的推理强度 #144 ) — the trace keeps the effort the agent asked for and, on each try, the one sent upstream after the turn's pick and fitting to the model's levels (picked marks the turn's pick), so the Routing list reads "Fake · m-big · high", its tooltip says what the agent asked for, and the request's story adds "The turn's pick replaced the medium Codex asked for."; usage.jsonl records the sent effort too, and the Usage session list shows where magpie routed a session's calls and at what reasoning ("→ m-big · high +1", with a Routed line per model and effort in its detail)

2026-09-28 18:11:58 +08:00