Files
yetone
559ce02147
models: a model's own name given by the user keeps its provider after it too (#203 uclort: 如果在供应商模型页自定义模型名称，在 Codex 中就不会显示供应商了) — Entry.Label() showed "name · provider" only for a model's own (vendor's or models.dev's) name; a name the user gave it (provider's model page → Names & levels) dropped the provider entirely, so a renamed model in Codex's picker (and Pi's, ZCode's, OMP's, magpie's own gateway list — everything magpieModels/Label feeds) could no longer be told apart by vendor at a glance. Label() now appends " · provider" (or "routing group") to a custom name too, the same as it does for the vendor's own, and only leaves it off when the name already contains the provider's (case-insensitively), so a name like "Sol on A" isn't doubled to "Sol on A · A". No settings toggle added: the fix makes the provider suffix unconditional (what the issue actually asked for), so a preference to hide/show it would only reintroduce the gap; there's also no existing "model list" preferences surface to hang it on cheaply — Names & levels only holds the name and reasoning-level pickers. Tested with TestModelName (internal/provider/modelprefs_test.go, sandbox HOME): a custom name now reads "My Sol · A" in Label() and in CodexListed(), and "Sol on A" (already containing the provider) is left alone; and TestModelNameAndLevelsReachAgentFiles (internal/agent/modelprefs_test.go, sandbox HOME) checks the generated Codex model_catalog_json and Pi models.json entries carry "GLM · Relay" for a custom name and don't double it to "GLM via Relay · Relay" when the name already says Relay. go build -tags nogui (and GOOS=linux, GOOS=windows), go test -tags nogui -count=1 ./... pass except TestUserPath and TestClaudeAccountNamedAsItsLogin, which are load-flaky (pass alone, unrelated to this change) same as the pre-existing rtk.go gofmt / TestConfiguredModelsAdvertiseImageInput flakiness
agent: Claude Desktop runs on magpie in its third-party mode (#156: Claude Desktop 不会解锁 Claude Code 面板 — CC Switch 可以，咱这个支持吗？) — signed in with a Free account, Desktop's Code tab is only "Get Claude Code"; in its 3p deployment mode it needs no Anthropic sign-in and Code and Cowork run on the gateway. A Claude Desktop agent whose provider field switches it: on writes deploymentMode "3p" into Claude/ and Claude-3p/claude_desktop_config.json, a magpie profile in Claude-3p/configLibrary/<id>.json (inferenceProvider gateway, inferenceGatewayBaseUrl the gateway's address, inferenceGatewayApiKey magpie-claude-desktop, inferenceGatewayAuthScheme bearer; disableDeploymentModeChooser and coworkEgressAllowedHosts ["*"] only where unset) and its entry in _meta.json, applied — the keys and files CC Switch writes (claude_desktop_config.rs). No inferenceModels: Desktop lists /v1/models, which the gateway already gives it by ids it keeps. Off puts each deploymentMode back as it was (gone where there was none), the profile applied before applied again, magpie's profile and entry removed, and files and folders magpie made gone if nothing else went in; other keys and profiles are never touched. Folders as CC Switch finds them: ~/Library/Application Support, %LOCALAPPDATA% (a Claude… folder there if not Claude itself), $XDG_CONFIG_HOME. Desktop reads them at start-up, which the picker and notice say. The Library keeps giving Desktop's MCP servers to %APPDATA%'s file on Windows, listed once. Tested in a sandbox home: fresh, with the user's settings and 3p profiles (off restores every byte), on twice, on → off → on, drift, odd files refused, each system's folders; and against Claude Desktop 2.9939.2 on Windows 11 (winget): on, it started in 3P mode (provider gateway, apiHost the gateway) with the Code tab and no sign-in, and asked the gateway's /v1/models; off, it went back to claude.ai
agent: Claude Desktop runs on magpie in its third-party mode (#156: Claude Desktop 不会解锁 Claude Code 面板 — CC Switch 可以，咱这个支持吗？) — signed in with a Free account, Desktop's Code tab is only "Get Claude Code"; in its 3p deployment mode it needs no Anthropic sign-in and Code and Cowork run on the gateway. A Claude Desktop agent whose provider field switches it: on writes deploymentMode "3p" into Claude/ and Claude-3p/claude_desktop_config.json, a magpie profile in Claude-3p/configLibrary/<id>.json (inferenceProvider gateway, inferenceGatewayBaseUrl the gateway's address, inferenceGatewayApiKey magpie-claude-desktop, inferenceGatewayAuthScheme bearer; disableDeploymentModeChooser and coworkEgressAllowedHosts ["*"] only where unset) and its entry in _meta.json, applied — the keys and files CC Switch writes (claude_desktop_config.rs). No inferenceModels: Desktop lists /v1/models, which the gateway already gives it by ids it keeps. Off puts each deploymentMode back as it was (gone where there was none), the profile applied before applied again, magpie's profile and entry removed, and files and folders magpie made gone if nothing else went in; other keys and profiles are never touched. Folders as CC Switch finds them: ~/Library/Application Support, %LOCALAPPDATA% (a Claude… folder there if not Claude itself), $XDG_CONFIG_HOME. Desktop reads them at start-up, which the picker and notice say. The Library keeps giving Desktop's MCP servers to %APPDATA%'s file on Windows, listed once. Tested in a sandbox home: fresh, with the user's settings and 3p profiles (off restores every byte), on twice, on → off → on, drift, odd files refused, each system's folders; and against Claude Desktop 2.9939.2 on Windows 11 (winget): on, it started in 3P mode (provider gateway, apiHost the gateway) with the Code tab and no sign-in, and asked the gateway's /v1/models; off, it went back to claude.ai
agent: Claude Desktop runs on magpie in its third-party mode (#156: Claude Desktop 不会解锁 Claude Code 面板 — CC Switch 可以，咱这个支持吗？) — signed in with a Free account, Desktop's Code tab is only "Get Claude Code"; in its 3p deployment mode it needs no Anthropic sign-in and Code and Cowork run on the gateway. A Claude Desktop agent whose provider field switches it: on writes deploymentMode "3p" into Claude/ and Claude-3p/claude_desktop_config.json, a magpie profile in Claude-3p/configLibrary/<id>.json (inferenceProvider gateway, inferenceGatewayBaseUrl the gateway's address, inferenceGatewayApiKey magpie-claude-desktop, inferenceGatewayAuthScheme bearer; disableDeploymentModeChooser and coworkEgressAllowedHosts ["*"] only where unset) and its entry in _meta.json, applied — the keys and files CC Switch writes (claude_desktop_config.rs). No inferenceModels: Desktop lists /v1/models, which the gateway already gives it by ids it keeps. Off puts each deploymentMode back as it was (gone where there was none), the profile applied before applied again, magpie's profile and entry removed, and files and folders magpie made gone if nothing else went in; other keys and profiles are never touched. Folders as CC Switch finds them: ~/Library/Application Support, %LOCALAPPDATA% (a Claude… folder there if not Claude itself), $XDG_CONFIG_HOME. Desktop reads them at start-up, which the picker and notice say. The Library keeps giving Desktop's MCP servers to %APPDATA%'s file on Windows, listed once. Tested in a sandbox home: fresh, with the user's settings and 3p profiles (off restores every byte), on twice, on → off → on, drift, odd files refused, each system's folders; and against Claude Desktop 2.9939.2 on Windows 11 (winget): on, it started in 3P mode (provider gateway, apiHost the gateway) with the Code tab and no sign-in, and asked the gateway's /v1/models; off, it went back to claude.ai
agents: each agent's CLI shows its version and updates in one click (#202 JoeyMa-zh: Agents 页面增加"更新 CLI"功能 — 检查各 agent CLI 的版本并一键更新) — the Agents page now puts each CLI's installed version after its name (read with
<cli> --version, 10s timeout, no stdin) and, when a newer one is out and magpie can tell how it was installed, a small "Update to x.y.z" pill. How it was installed comes from the resolved binary: the vendor's own installer first (Claude Code's ~/.local/share/claude/versions → claude update, Codex standalone → codex update, ~/.opencode/bin → opencode upgrade), then a global node_modules (bun, pnpm, else npm, run as npm install -g --prefix <prefix> pkg@latest with that prefix's npm, and only where the prefix is writable), then a Homebrew formula or cask allowlisted per agent (brew upgrade [--cask]); anything else shows the version alone, with no button. The latest comes from the npm registry or brew info --json=v2 (no auto-update), cached 6h (15min after a failure); installed versions are cached by the binary's path, size and mtime. GET /api/agents/cli waits at most 3s and says pending, and the page asks again; POST /api/agents/cli/{id} runs the update (one at a time per agent, 10min cap), reads the version again and says so if it did not change, or gives the command's last lines when it fails. The pill goes busy in place and the page never scrolls; not in the tray panel. zh strings added. Tested with a new internal/agent/cliupdate_test.go (version order and parsing; npm/bun/pnpm/brew formula and cask/native installs, a read-only prefix, a local node_modules and unknown binaries in a fake PATH; an update against a fake registry and updater) and a new internal/gui/tests/cli-update.test.cjs in Chromium and WebKit (versions, pills only where magpie can update, row heights, an update with the view scrolled, a failing one, zh). No real update was run. go build (nogui, GOOS=windows, GOOS=linux), go test -tags nogui ./... and the GUI tests pass
agents: each agent's CLI shows its version and updates in one click (#202 JoeyMa-zh: Agents 页面增加"更新 CLI"功能 — 检查各 agent CLI 的版本并一键更新) — the Agents page now puts each CLI's installed version after its name (read with
<cli> --version, 10s timeout, no stdin) and, when a newer one is out and magpie can tell how it was installed, a small "Update to x.y.z" pill. How it was installed comes from the resolved binary: the vendor's own installer first (Claude Code's ~/.local/share/claude/versions → claude update, Codex standalone → codex update, ~/.opencode/bin → opencode upgrade), then a global node_modules (bun, pnpm, else npm, run as npm install -g --prefix <prefix> pkg@latest with that prefix's npm, and only where the prefix is writable), then a Homebrew formula or cask allowlisted per agent (brew upgrade [--cask]); anything else shows the version alone, with no button. The latest comes from the npm registry or brew info --json=v2 (no auto-update), cached 6h (15min after a failure); installed versions are cached by the binary's path, size and mtime. GET /api/agents/cli waits at most 3s and says pending, and the page asks again; POST /api/agents/cli/{id} runs the update (one at a time per agent, 10min cap), reads the version again and says so if it did not change, or gives the command's last lines when it fails. The pill goes busy in place and the page never scrolls; not in the tray panel. zh strings added. Tested with a new internal/agent/cliupdate_test.go (version order and parsing; npm/bun/pnpm/brew formula and cask/native installs, a read-only prefix, a local node_modules and unknown binaries in a fake PATH; an update against a fake registry and updater) and a new internal/gui/tests/cli-update.test.cjs in Chromium and WebKit (versions, pills only where magpie can update, row heights, an update with the view scrolled, a failing one, zh). No real update was run. go build (nogui, GOOS=windows, GOOS=linux), go test -tags nogui ./... and the GUI tests pass
agent: Claude Desktop runs on magpie in its third-party mode (#156: Claude Desktop 不会解锁 Claude Code 面板 — CC Switch 可以，咱这个支持吗？) — signed in with a Free account, Desktop's Code tab is only "Get Claude Code"; in its 3p deployment mode it needs no Anthropic sign-in and Code and Cowork run on the gateway. A Claude Desktop agent whose provider field switches it: on writes deploymentMode "3p" into Claude/ and Claude-3p/claude_desktop_config.json, a magpie profile in Claude-3p/configLibrary/<id>.json (inferenceProvider gateway, inferenceGatewayBaseUrl the gateway's address, inferenceGatewayApiKey magpie-claude-desktop, inferenceGatewayAuthScheme bearer; disableDeploymentModeChooser and coworkEgressAllowedHosts ["*"] only where unset) and its entry in _meta.json, applied — the keys and files CC Switch writes (claude_desktop_config.rs). No inferenceModels: Desktop lists /v1/models, which the gateway already gives it by ids it keeps. Off puts each deploymentMode back as it was (gone where there was none), the profile applied before applied again, magpie's profile and entry removed, and files and folders magpie made gone if nothing else went in; other keys and profiles are never touched. Folders as CC Switch finds them: ~/Library/Application Support, %LOCALAPPDATA% (a Claude… folder there if not Claude itself), $XDG_CONFIG_HOME. Desktop reads them at start-up, which the picker and notice say. The Library keeps giving Desktop's MCP servers to %APPDATA%'s file on Windows, listed once. Tested in a sandbox home: fresh, with the user's settings and 3p profiles (off restores every byte), on twice, on → off → on, drift, odd files refused, each system's folders; and against Claude Desktop 2.9939.2 on Windows 11 (winget): on, it started in 3P mode (provider gateway, apiHost the gateway) with the Code tab and no sign-in, and asked the gateway's /v1/models; off, it went back to claude.ai
agent: Command Code — its model picked in magpie like any agent's; a model through magpie adds magpie as a keyless provider in ~/.commandcode/providers.json with the catalog as its models, and sets settings.json's model to magpie/<provider>/<model>; its own models stay as they are, and default takes magpie's entry out; Command Code still wants its own sign-in (#32)
ui: a subscription's windows side by side put every count under its name once one's doesn't fit beside it, not one up by its name and the next a line below (#90); a provider's models can be picked all at once (those the filter shows) or none, and their list scrolls on its own, not the editor with it (#115); DeepSeek Harness's own models are listed under its name, apart from magpie's DeepSeek provider, which read as DeepSeek twice (#115); Hide emails says when it is on — a struck eye, 邮箱已打码 and the accent, an open eye while emails show
agent: add Hermes Agent (#49) — magpie adds itself to ~/.hermes/config.yaml ($HERMES_HOME) as the provider "magpie" under providers (the gateway as chat completions, the catalog as its models) and points model.provider at it, with the model in model.default; the provider and model the user had are stashed and put back when they pick one of Hermes's own or go back to the default. Hermes sends its own User-Agent only from a recent release on, so the entry sets it for the gateway's usage view
provider: Antigravity's models at several levels are one model with those levels (#150: 统一 Antigravity 模型变体与客户端推理档位的映射) — Antigravity lists gemini-3.7-flash-low, -medium and -high as three models, "Gemini 3.7 Flash (Low)" …, so a client picked a level twice: once in the model, once as its reasoning effort, with no telling which won. Now ids that are one id with an effort word after it (-low, -medium, -high, -extra-low, -minimal, -xhigh) are one model, gemini-3.7-flash "Gemini 3.7 Flash", declaring only the levels there are (low,medium,high; Gemini 3.1 Pro low,high), so Codex, Pi and the rest get reasoning levels for it. The level a variant is at is what Antigravity's name says where each name says a different one (gemini-3.5-flash-extra-low is "(Low)", gemini-3.5-flash-low "(Medium)"), else its id's word; a model only named like another (gemini-3-flash-agent, "Gemini 3.5 Flash (High)"; gemini-pro-agent) or with no sibling (gpt-oss-120b-medium) stays as listed. A request asks for the variant the effort picks, an effort it lacks at the nearest level (xhigh is high; medium on low/high is high); with none asked, the id without a level if Antigravity has one, else high — what Gemini 3 does unasked — else the highest. A variant's request carries no thinkingLevel, so the id and the level can't disagree. An old variant id still works: as named with no effort, and moved to the effort asked for. Saved picks and agents set to a variant (antigravity/gemini-3.7-flash-high) are moved to the family, at that level where the agent's own is unset, as Cursor's are. For Gemini 3 models without variants, medium now goes as medium to Flash (which takes minimal/low/medium/high) and still as high to Pro (low/high). Tested against the list an account's fetchAvailableModels gave (sandbox cache)
models: a model's own name given by the user keeps its provider after it too (#203 uclort: 如果在供应商模型页自定义模型名称，在 Codex 中就不会显示供应商了) — Entry.Label() showed "name · provider" only for a model's own (vendor's or models.dev's) name; a name the user gave it (provider's model page → Names & levels) dropped the provider entirely, so a renamed model in Codex's picker (and Pi's, ZCode's, OMP's, magpie's own gateway list — everything magpieModels/Label feeds) could no longer be told apart by vendor at a glance. Label() now appends " · provider" (or "routing group") to a custom name too, the same as it does for the vendor's own, and only leaves it off when the name already contains the provider's (case-insensitively), so a name like "Sol on A" isn't doubled to "Sol on A · A". No settings toggle added: the fix makes the provider suffix unconditional (what the issue actually asked for), so a preference to hide/show it would only reintroduce the gap; there's also no existing "model list" preferences surface to hang it on cheaply — Names & levels only holds the name and reasoning-level pickers. Tested with TestModelName (internal/provider/modelprefs_test.go, sandbox HOME): a custom name now reads "My Sol · A" in Label() and in CodexListed(), and "Sol on A" (already containing the provider) is left alone; and TestModelNameAndLevelsReachAgentFiles (internal/agent/modelprefs_test.go, sandbox HOME) checks the generated Codex model_catalog_json and Pi models.json entries carry "GLM · Relay" for a custom name and don't double it to "GLM via Relay · Relay" when the name already says Relay. go build -tags nogui (and GOOS=linux, GOOS=windows), go test -tags nogui -count=1 ./... pass except TestUserPath and TestClaudeAccountNamedAsItsLogin, which are load-flaky (pass alone, unrelated to this change) same as the pre-existing rtk.go gofmt / TestConfiguredModelsAdvertiseImageInput flakiness
agent: omp (oh-my-pi) — its model picked in magpie like any agent's; a model through magpie adds magpie as a keyless provider in ~/.omp/agent/models.yml with the catalog as its models, and sets config.yml's modelRoles.default to magpie/<provider>/<model>; its other roles and the rest of both files stay as they are, comments too, and default takes magpie's entry out unless another role still uses it (#34)
agent: Pi starts on the model magpie picks, and asks a Messages-only provider's models on Messages (#160 Aimer779; Cleary on Discord)
agent: Pi starts on the model magpie picks, and asks a Messages-only provider's models on Messages (#160 Aimer779; Cleary on Discord)
agent: Pi starts on the model magpie picks, and asks a Messages-only provider's models on Messages (#160 Aimer779; Cleary on Discord)
agents: a provider switched off or removed, or its last account signed out, moves the agents on its models to others (#200: 希望关闭某个llm provider的时候，更改agent选择的model到可用的model … 关闭这个provider之后，第一次使用会报错，因为copilot/ 开头的模型不存在) — switching Copilot off took copilot/… out of the catalog and the agents' model lists, but an agent picked on one kept it in its config and its next request was refused as switched off. Now every field on one of magpie's models (the model, Claude Code's opus/sonnet/haiku/fable tiers, any other) whose model the change stopped serving is moved: to the same model from a provider still on, the same id first, else one spelt another way (claude-sonnet-4.5 and claude-sonnet-4-5-20250929), else back to the agent's own default (a Claude Code tier: following the main model). It is done around switching off, removing, a key removed or off, and a sign-in signed out or off, in the window, the tray panel, the TUI and the CLI; the page's status line, the TUI and the CLI say which agent went to what. A session started before the switch still asks for the old model: the gateway now takes a switched-off provider's model as unserved, so Claude Code's stand-in (its model as set now) answers it rather than a refusal. Tested in a sandbox HOME: Claude Code on the main model and three tiers plus Hermes, switched off and removed (same id, other spelling, default, a tier following), switched on again moving nothing; /api/provider/off returns the moves; the gateway serves a switched-off model through the stand-in (fails without the change) and still refuses it to an agent left on it
agents: a provider switched off or removed, or its last account signed out, moves the agents on its models to others (#200: 希望关闭某个llm provider的时候，更改agent选择的model到可用的model … 关闭这个provider之后，第一次使用会报错，因为copilot/ 开头的模型不存在) — switching Copilot off took copilot/… out of the catalog and the agents' model lists, but an agent picked on one kept it in its config and its next request was refused as switched off. Now every field on one of magpie's models (the model, Claude Code's opus/sonnet/haiku/fable tiers, any other) whose model the change stopped serving is moved: to the same model from a provider still on, the same id first, else one spelt another way (claude-sonnet-4.5 and claude-sonnet-4-5-20250929), else back to the agent's own default (a Claude Code tier: following the main model). It is done around switching off, removing, a key removed or off, and a sign-in signed out or off, in the window, the tray panel, the TUI and the CLI; the page's status line, the TUI and the CLI say which agent went to what. A session started before the switch still asks for the old model: the gateway now takes a switched-off provider's model as unserved, so Claude Code's stand-in (its model as set now) answers it rather than a refusal. Tested in a sandbox HOME: Claude Code on the main model and three tiers plus Hermes, switched off and removed (same id, other spelling, default, a tier following), switched on again moving nothing; /api/provider/off returns the moves; the gateway serves a switched-off model through the stand-in (fails without the change) and still refuses it to an agent left on it
agents: each agent's CLI shows its version and updates in one click (#202 JoeyMa-zh: Agents 页面增加"更新 CLI"功能 — 检查各 agent CLI 的版本并一键更新) — the Agents page now puts each CLI's installed version after its name (read with
<cli> --version, 10s timeout, no stdin) and, when a newer one is out and magpie can tell how it was installed, a small "Update to x.y.z" pill. How it was installed comes from the resolved binary: the vendor's own installer first (Claude Code's ~/.local/share/claude/versions → claude update, Codex standalone → codex update, ~/.opencode/bin → opencode upgrade), then a global node_modules (bun, pnpm, else npm, run as npm install -g --prefix <prefix> pkg@latest with that prefix's npm, and only where the prefix is writable), then a Homebrew formula or cask allowlisted per agent (brew upgrade [--cask]); anything else shows the version alone, with no button. The latest comes from the npm registry or brew info --json=v2 (no auto-update), cached 6h (15min after a failure); installed versions are cached by the binary's path, size and mtime. GET /api/agents/cli waits at most 3s and says pending, and the page asks again; POST /api/agents/cli/{id} runs the update (one at a time per agent, 10min cap), reads the version again and says so if it did not change, or gives the command's last lines when it fails. The pill goes busy in place and the page never scrolls; not in the tray panel. zh strings added. Tested with a new internal/agent/cliupdate_test.go (version order and parsing; npm/bun/pnpm/brew formula and cask/native installs, a read-only prefix, a local node_modules and unknown binaries in a fake PATH; an update against a fake registry and updater) and a new internal/gui/tests/cli-update.test.cjs in Chromium and WebKit (versions, pills only where magpie can update, row heights, an update with the view scrolled, a failing one, zh). No real update was run. go build (nogui, GOOS=windows, GOOS=linux), go test -tags nogui ./... and the GUI tests pass
agents: each agent's CLI shows its version and updates in one click (#202 JoeyMa-zh: Agents 页面增加"更新 CLI"功能 — 检查各 agent CLI 的版本并一键更新) — the Agents page now puts each CLI's installed version after its name (read with
<cli> --version, 10s timeout, no stdin) and, when a newer one is out and magpie can tell how it was installed, a small "Update to x.y.z" pill. How it was installed comes from the resolved binary: the vendor's own installer first (Claude Code's ~/.local/share/claude/versions → claude update, Codex standalone → codex update, ~/.opencode/bin → opencode upgrade), then a global node_modules (bun, pnpm, else npm, run as npm install -g --prefix <prefix> pkg@latest with that prefix's npm, and only where the prefix is writable), then a Homebrew formula or cask allowlisted per agent (brew upgrade [--cask]); anything else shows the version alone, with no button. The latest comes from the npm registry or brew info --json=v2 (no auto-update), cached 6h (15min after a failure); installed versions are cached by the binary's path, size and mtime. GET /api/agents/cli waits at most 3s and says pending, and the page asks again; POST /api/agents/cli/{id} runs the update (one at a time per agent, 10min cap), reads the version again and says so if it did not change, or gives the command's last lines when it fails. The pill goes busy in place and the page never scrolls; not in the tray panel. zh strings added. Tested with a new internal/agent/cliupdate_test.go (version order and parsing; npm/bun/pnpm/brew formula and cask/native installs, a read-only prefix, a local node_modules and unknown binaries in a fake PATH; an update against a fake registry and updater) and a new internal/gui/tests/cli-update.test.cjs in Chromium and WebKit (versions, pills only where magpie can update, row heights, an update with the view scrolled, a failing one, zh). No real update was run. go build (nogui, GOOS=windows, GOOS=linux), go test -tags nogui ./... and the GUI tests pass