Files
magpie/internal/davsync
yetone 10f7b4aa3f davsync, gui: a WebDAV server whose HEAD says Content-Length: 0 no longer fails every shared usage day as "kept 0 of 6869 bytes", and a usage share that failed is its own red line under the sync status (#1259, mzcinf on 坚果云)
After each PUT, check read the file's size from a HEAD and called anything
shorter a cut write. On 坚果云 every usage write failed that way with 0
bytes kept, three tries each; the 0 can only have come from the HEAD's
Content-Length, since a 6869-byte body that the PUT sends with its
Content-Length (not chunked) isn't cut by a dropping network three times
running. A HEAD that says short is now asked again of PROPFIND (Depth 0)
getcontentlength, the size WebDAV clients of 坚果云 read. The write counts
as kept when that size is whole. When PROPFIND gives no size, the HEAD's
stands. A real cut write is still told as cut, with the bytes PROPFIND
says were kept. The extra request is made only after a short HEAD, so
坚果云's request limit isn't spent on servers whose HEAD is right. The
backup's own PUT goes through the same check, so a 坚果云 user whose
setup changes would have hit the same error on the main sync.

Settings > Sync put "Couldn't share usage: …" in the same grey line as
"Synced · host", so it read as part of a sync that went fine. It is now a
line of its own under the status, in red, wrapped whole at 440px. The CLI
already printed it on its own line.

Verified: TestNutstoreHeadSaysNoLength and TestNutstoreBackupWrite use a
fake 坚果云: HEAD Content-Length: 0, real getcontentlength on PROPFIND,
409 for a read in a missing folder, a chunked PUT refused. Whole writes
sync with no usage error, and each write goes once with one HEAD and one
PROPFIND. A tunnel that keeps half is still told as cut, with the half it kept.
On the old dav.go all three fail ("the WebDAV server kept 0 of 536 bytes
of magpie.magpie-backup", "kept 0 of 6869"). TestDAVShortWrite and
TestUsageSharedShortWrite/TestUsageSyncShortWrite pass unchanged.
sync-usage-error.test.cjs runs in Chromium and WebKit, en/zh/ja/de, at
900 and 440px, and fails on the old app.js ("the status line carries no
usage error: 14:46 已同步 · dav.jianguoyun.com · 用量未能共享:…"). The
sync-*, s3-sync, usage-computers, gui-ja, gui-de, gui-zh-tw, i18n-keys
and click-scroll tests pass, 78/78. go test -tags nogui -count=1
./internal/davsync ./internal/gui pass under a temp HOME. go vet passes
on darwin, GOOS=linux and GOOS=windows. Not tried against a real 坚果云
account: that its HEAD answers 0 is inferred from the error, and that its
PROPFIND gives the real size is how its other WebDAV clients read sizes,
neither seen here.
2026-10-08 14:52:11 +08:00
..
archive: a request the archive kept is opened and downloaded from the Usage page, with its bodies whole (jorben, #447: 请求存档 reachable from usage history, full bodies, download) — the archive's name was only on the Gateway page's recent calls, gone once a call left the list or the gateway restarted, and the archive kept the first 256 KB of each body, the recent list's cut. The usage ledger's row now names the call's archive (archive in usage.jsonl, kept through the Requests page's packed rows), and its details on Usage → Requests show the Request archive panel, Fetch from archive and Download; with the archive on, a request it has no copy of says "Not archived". The bodies are kept whole up to requestArchiveMaxMB in settings.json (32 MB unless set, at most 1024): the response is teed to a temp file as it is sent, the request body written to one when the call ends, so the upload queue holds file handles, not bodies, and one upload at a time reads them; a body past the limit is kept to it and marked cut, with its whole size. What goes upstream is unchanged, the archive stays off unless turned on, headers and bodies are scrubbed as before, and the temp files are removed after the upload or when the queue is full. The page is sent a body to show only when it is 256 KB or less (a longer one is said by its size), an archive over 80 MB is only said to be; Download streams the object whole, to Downloads in the app (archive/export, -2, -3… for a name taken) and as the browser's download in magpie web (archive/file). TestArchiveWholeBodies, TestArchiveLimit, TestRowKeepsArchive and TestArchivePreviewAndDownload fail without the change; TestArchiveOffUsage, TestArchiveTooLargeToPreview, TestArchiveOldPreview keep the rest. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass; request-archive-usage (new), request-archive, click-scroll, old-webkit, usage-ledger, usage-ledger-detail, usage-ledger-content, web-page, sse-body pass.
2026-10-02 00:57:51 +08:00
davsync: an unchanged file on the server costs a request, not a download (Crispin on Discord: 是不是Magpie后台一直在自动同步,导致被坚果云给限制了) — every 3 minutes sync read the whole sealed file even when nothing had changed, and 坚果云's free plan caps monthly downloads and requests per 30 minutes. The sync state now keeps the server's version beside its hash (its ETag, or a Last-Modified at least a second older than the server's Date, so a write in that same second can't go unseen), from the read or from the ETag a write answers with (none said: the next sync reads in full, as before); the next read sends If-None-Match (or If-Modified-Since) and a 304 with nothing changed here ends the sync, while a change here merges with a copy of the server's file kept beside sync-state.json (sync-server.magpie-backup, 0600, checked against the hash; gone or different, the file is read again), so it isn't read twice. A server that ignores the condition sends the file and syncs exactly as today. S3 does the same with If-None-Match on GetObject, signed with the rest (the fake S3 checks every signature). A 429 or 503 (S3's SlowDown) now says the server is limiting how often magpie may reach it, and Run waits as long as Retry-After says (up to 6 h) or else doubles from 6 up to 30 minutes, back to 3 after a sync that goes through; log de-dup is kept, as the message doesn't carry the wait. The 403 paths (there, forbidden) only run when the server answers 403, so a working setup costs one conditional GET per cycle. TestSyncUnchangedIsNotRead (ETag, ETag not on PUT, Last-Modified: three unchanged cycles read 0 bytes, a server change is read once and merged, a change here is pushed without a read, a missing copy is read again), TestSyncRateLimited and TestS3Unchanged fail without the change (with the conditions dropped: 3 full reads of 1932 bytes, 'HTTP 429' with no backoff, unconditional S3 GETs); TestSyncIgnoringConditions guards servers without conditional reads. go vet ./internal/..., go build -tags nogui ./... (darwin, GOOS=linux), GOOS=windows go build ./..., go test -tags nogui ./internal/davsync/ ./internal/gui/ pass.
2026-10-02 11:08:14 +08:00
sync: a backup on a slow line is no longer cut off at 2 minutes; a server that stops moving is (#657, irx999: a 43 MB backup with many skills to a WebDAV server on a 2.4 Mbps VPS, 305 KB/s, needs 2.4 minutes and every sync failed) — a sync had a fixed deadline in all (2 minutes from the gateway's loop and magpie webdav/s3 sync, 90 s from Settings › Sync now), so a large backup on a slow line never got through, however steadily it moved. WebDAV and S3 requests now go through a watchdog instead (stall.go): the backup's GET and PUT fail once nothing has moved either way for 60 s, each byte of the body sent or read putting it back, and after a PUT's body is all handed over the answer gets 60 s on top of as long as the write took (at least 4 minutes), for what still sits in the system's buffers to leave; the other requests (PROPFIND, MKCOL, HEAD, MOVE, DELETE) have 30 s in all. A stall says so ("the server sent and took nothing for 1m0s (PUT)"). Sync now and the CLI have no deadline; the gateway's loop keeps an hour as a backstop; a wait for another magpie's sync stays 30 s. TestSlowTransferIsNotCutShort (20 MB up and down at a steady trickle, over 5 times the watchdog each way), TestStalledTransferFailsPromptly (a server stopping mid-PUT and mid-GET fails within a second) and TestMetadataRequestHasALimit fail on the old code (no watchdog: the stalled ones hang) and pass. go vet, builds (darwin, GOOS=linux, GOOS=windows) and go test -tags nogui -count=1 ./... under a temp HOME pass. Not tried against a real slow WebDAV server.
2026-10-03 16:10:02 +08:00
usage: quota cards draw what was left over time, against an even burn, and the tray card its cycle's line (#651, songlairui) — each reading magpie makes anyway of a subscription's windows (and of a plan bought with a key) is kept as a point in quota-history.json beside the config: provider, account, window, when read, percent left, the window's start and reset — no token, no prompt. A failed reading, one kept from before (As of), an unlimited window and a model family's aren't kept; Antigravity's pools are kept by pool. Within a cycle points are 5 minutes apart at least and a run of one figure is its two ends; a cycle ends where the window starts again (its reset passed, or moved further than the time between two readings, so a rolling window's isn't one). 45 days and 6000 points a window are kept. The Usage page's card has, under its meters, a line a window (several tiers of one account on one chart), broken at each reset, a dashed even burn from each window's start to its reset and an upright now line, with 2 days / Cycle (the account's longest current window, start to reset) in the app's segmented control, remembered, turning every card without moving the page. The tray's card has a thin line of its first window's current cycle. GET /v1/magpie/quotas/history (?days=, ?provider=, ?user=; local or LAN with the key, as /v1/magpie/quotas) and /api/usage/quotas/history serve it; /v1/magpie/quotas and magpie quota stay snapshots. Computers sharing usage (WebDAV/S3, Settings › Sync › usage) put their history beside their days, sealed, as <id>.magpie-quotas, and merge the others': the union by account, window and time, two points within 30 s the newer, nothing twice however often they sync; an older magpie never reads the file. TestQuotaHistoryRecords, TestQuotaHistoryCycles, TestMergeQuotaHistory, TestQuotasHistory and TestQuotaHistorySharedBetweenComputers cover recording, cycles, pruning, merge, the API and two computers on one WebDAV folder; quota-curve.test.cjs (WebKit, en/zh, light and dark) the curves, the toggle, no curve without readings, and the tray's line (Chromium doesn't start in this sandbox). go vet, builds (darwin, GOOS=linux, GOOS=windows) and go test -tags nogui -count=1 ./... under a temp HOME pass. Not tried with real accounts; pay-as-you-go balances aren't drawn.
2026-10-03 15:19:19 +08:00
sync: it can sync by itself less often or only when asked, and the server's setup can be restored over this computer's, undoably (Sun1090, #847: 同步太快了,需要设置个开关控制自动同步,还有恢复按钮) — the gateway's magpie synced every 3 minutes with no way to change it, and a free 坚果云 account is allowed only so many WebDAV requests (600 per 30 minutes, 1 GB up and 3 GB down a month); and there was no way to take the server's setup back over a computer's own, which the next sync would otherwise push up. Settings › Sync now has Sync by itself, the app's segmented control (no <select>): Off, 3 min (the default, as before), 15 min, 30 min, 1 hour; Off syncs only on Sync now, and the sync row says only when asked. The loop reads the setting each minute (no request), so a change takes effect without a restart, and a server limiting requests is still waited for as backoff says. Restore from the server asks first in the app's own dialog, naming the parts replaced; it reads the server's file as it is now, seals this computer's setup (keys and all) into the sync folder as <time>-before-restore (newest 5 kept), brings in each part that differs as a sync brings one changed only there, and leaves the state as such a sync would, so the next sync pushes nothing back. Its notice says what was restored, with Undo, which brings the kept setup back (the next sync then takes it to the others); OK, or a later sync's own notice, drops the undo. The form's Save keeps the setting (SetAuto alone sets it). CLI: magpie webdav|s3 auto off|3|15|30|60, restore, undo; the status says how often it syncs by itself. zh, ja, de strings. TestAutoSync (off: no request by itself; back to 15 min: one sync, then none; Save keeps it; 7 refused) and TestRestore (b's own changes replaced by the server's with no push, the kept copy holds b's provider and key, Undo puts it back and a gets it, nothing differing restores nothing) pass -race; sync-auto-restore.test.cjs (WebKit, en and zh: Off posts -1 and the rows say so, Cancel posts nothing, Restore and Undo post, no click moves the page) fails on the old code. sync-other-kind, sync-spin, s3-sync, webdav-settings-refresh, usage-computers, click-scroll, gui-ja, gui-de and settings-sections pass on WebKit. go vet, builds (darwin, GOOS=linux nogui, GOOS=windows) and go test -tags nogui -count=1 ./... under a temp HOME pass.
2026-10-05 10:36:46 +08:00
sync: it can sync by itself less often or only when asked, and the server's setup can be restored over this computer's, undoably (Sun1090, #847: 同步太快了,需要设置个开关控制自动同步,还有恢复按钮) — the gateway's magpie synced every 3 minutes with no way to change it, and a free 坚果云 account is allowed only so many WebDAV requests (600 per 30 minutes, 1 GB up and 3 GB down a month); and there was no way to take the server's setup back over a computer's own, which the next sync would otherwise push up. Settings › Sync now has Sync by itself, the app's segmented control (no <select>): Off, 3 min (the default, as before), 15 min, 30 min, 1 hour; Off syncs only on Sync now, and the sync row says only when asked. The loop reads the setting each minute (no request), so a change takes effect without a restart, and a server limiting requests is still waited for as backoff says. Restore from the server asks first in the app's own dialog, naming the parts replaced; it reads the server's file as it is now, seals this computer's setup (keys and all) into the sync folder as <time>-before-restore (newest 5 kept), brings in each part that differs as a sync brings one changed only there, and leaves the state as such a sync would, so the next sync pushes nothing back. Its notice says what was restored, with Undo, which brings the kept setup back (the next sync then takes it to the others); OK, or a later sync's own notice, drops the undo. The form's Save keeps the setting (SetAuto alone sets it). CLI: magpie webdav|s3 auto off|3|15|30|60, restore, undo; the status says how often it syncs by itself. zh, ja, de strings. TestAutoSync (off: no request by itself; back to 15 min: one sync, then none; Save keeps it; 7 refused) and TestRestore (b's own changes replaced by the server's with no push, the kept copy holds b's provider and key, Undo puts it back and a gets it, nothing differing restores nothing) pass -race; sync-auto-restore.test.cjs (WebKit, en and zh: Off posts -1 and the rows say so, Cancel posts nothing, Restore and Undo post, no click moves the page) fails on the old code. sync-other-kind, sync-spin, s3-sync, webdav-settings-refresh, usage-computers, click-scroll, gui-ja, gui-de and settings-sections pass on WebKit. go vet, builds (darwin, GOOS=linux nogui, GOOS=windows) and go test -tags nogui -count=1 ./... under a temp HOME pass.
2026-10-05 10:36:46 +08:00
davsync: an unchanged file on the server costs a request, not a download (Crispin on Discord: 是不是Magpie后台一直在自动同步,导致被坚果云给限制了) — every 3 minutes sync read the whole sealed file even when nothing had changed, and 坚果云's free plan caps monthly downloads and requests per 30 minutes. The sync state now keeps the server's version beside its hash (its ETag, or a Last-Modified at least a second older than the server's Date, so a write in that same second can't go unseen), from the read or from the ETag a write answers with (none said: the next sync reads in full, as before); the next read sends If-None-Match (or If-Modified-Since) and a 304 with nothing changed here ends the sync, while a change here merges with a copy of the server's file kept beside sync-state.json (sync-server.magpie-backup, 0600, checked against the hash; gone or different, the file is read again), so it isn't read twice. A server that ignores the condition sends the file and syncs exactly as today. S3 does the same with If-None-Match on GetObject, signed with the rest (the fake S3 checks every signature). A 429 or 503 (S3's SlowDown) now says the server is limiting how often magpie may reach it, and Run waits as long as Retry-After says (up to 6 h) or else doubles from 6 up to 30 minutes, back to 3 after a sync that goes through; log de-dup is kept, as the message doesn't carry the wait. The 403 paths (there, forbidden) only run when the server answers 403, so a working setup costs one conditional GET per cycle. TestSyncUnchangedIsNotRead (ETag, ETag not on PUT, Last-Modified: three unchanged cycles read 0 bytes, a server change is read once and merged, a change here is pushed without a read, a missing copy is read again), TestSyncRateLimited and TestS3Unchanged fail without the change (with the conditions dropped: 3 full reads of 1932 bytes, 'HTTP 429' with no backoff, unconditional S3 GETs); TestSyncIgnoringConditions guards servers without conditional reads. go vet ./internal/..., go build -tags nogui ./... (darwin, GOOS=linux), GOOS=windows go build ./..., go test -tags nogui ./internal/davsync/ ./internal/gui/ pass.
2026-10-02 11:08:14 +08:00
sync: a backup on a slow line is no longer cut off at 2 minutes; a server that stops moving is (#657, irx999: a 43 MB backup with many skills to a WebDAV server on a 2.4 Mbps VPS, 305 KB/s, needs 2.4 minutes and every sync failed) — a sync had a fixed deadline in all (2 minutes from the gateway's loop and magpie webdav/s3 sync, 90 s from Settings › Sync now), so a large backup on a slow line never got through, however steadily it moved. WebDAV and S3 requests now go through a watchdog instead (stall.go): the backup's GET and PUT fail once nothing has moved either way for 60 s, each byte of the body sent or read putting it back, and after a PUT's body is all handed over the answer gets 60 s on top of as long as the write took (at least 4 minutes), for what still sits in the system's buffers to leave; the other requests (PROPFIND, MKCOL, HEAD, MOVE, DELETE) have 30 s in all. A stall says so ("the server sent and took nothing for 1m0s (PUT)"). Sync now and the CLI have no deadline; the gateway's loop keeps an hour as a backstop; a wait for another magpie's sync stays 30 s. TestSlowTransferIsNotCutShort (20 MB up and down at a steady trickle, over 5 times the watchdog each way), TestStalledTransferFailsPromptly (a server stopping mid-PUT and mid-GET fails within a second) and TestMetadataRequestHasALimit fail on the old code (no watchdog: the stalled ones hang) and pass. go vet, builds (darwin, GOOS=linux, GOOS=windows) and go test -tags nogui -count=1 ./... under a temp HOME pass. Not tried against a real slow WebDAV server.
2026-10-03 16:10:02 +08:00
gateway: a model's web search goes to a search API of the user's own when no provider can search (#419 by HwFee: let me set up Tavily, Brave or SearXNG with my key rather than lose the search tool) — with no provider that searches by itself and no provider magpie could search with, the gateway took the client's web search tool away. Tavily, Brave Search, Exa, Firecrawl and SearXNG (an address of one's own, a key only if it asks for one) can now be set up, in an order: the injected web_search tool is then offered, and a search goes to the searcher's model as before, or, with none or when it fails, to each search API in turn, called directly with no model, its results handed back as the same hits and text the searcher path gives, so clients see the same web_search_tool_result blocks. The order is provider searches itself, searcher provider, search APIs, strip. They are kept in providers.json (0600) like provider keys; a backup carries them, their keys only when it carries keys, and one restored without keys keeps the key here; sync does the same, and a backup or sync from a magpie before them leaves the ones here alone. magpie search lists them, magpie search add <api> [key] [url=…] adds or updates one, magpie search rm <api> removes one; Settings has a Web search section (联网搜索) to add and remove them. Prompts, identity lines and headers to model providers are unchanged. TestWebSearchBySearchAPI, TestNoSearchAPINoTool, TestBackupSearchAPIs, TestSyncSearchAPIs and search-api.test.cjs fail without the change; TestSearchAPIsEachAsked checks each vendor against a fake, TestSearchCLI the command. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass; search-api, provider-search, click-scroll, old-webkit pass.
2026-10-01 19:44:44 +08:00
davsync: sync can keep its file in an S3-compatible bucket as well as a WebDAV folder (#296) — AWS S3, Cloudflare R2, Backblaze B2, MinIO, Garage or a NAS. Settings › Sync and backup picks WebDAV or S3: endpoint (empty is AWS), bucket, prefix, region (empty is us-east-1, auto for R2), access key ID and secret, path-style; CLI magpie s3 on s3://bucket/prefix access-key-id=… endpoint=… region=… path-style. The bucket holds the same passphrase-sealed file at <prefix>/magpie/magpie.magpie-backup, signed with SigV4 (no SDK). It is read with its ETag and written with If-Match (If-None-Match: * for the first), so two computers syncing at once don't overwrite each other; a server that refuses conditional writes (501, or 400 naming the header) is remembered and gets a HEAD-then-PUT instead. An IP, localhost or a dotted bucket on https goes path-style on its own. Errors say what to do: wrong key/secret, clock skew, bucket in another region (names it), no such bucket, 403 on the first read on AWS without s3:ListBucket. The secret is kept as the WebDAV password is, sent only to the endpoint and key it was typed for, and may not be the passphrase. sigv4_test (AWS's published vectors), s3_test (fake server: conditions, conflict, fallback, regions, errors), s3_cli_test and s3-sync.test.cjs (Chromium, WebKit, en/zh) fail without the change; tested against MinIO. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass (TestGroupAddSetRemove, a TempDir-cleanup flake under load, passes alone); click-scroll, old-webkit pass.
2026-09-30 17:07:47 +08:00
davsync: sync can keep its file in an S3-compatible bucket as well as a WebDAV folder (#296) — AWS S3, Cloudflare R2, Backblaze B2, MinIO, Garage or a NAS. Settings › Sync and backup picks WebDAV or S3: endpoint (empty is AWS), bucket, prefix, region (empty is us-east-1, auto for R2), access key ID and secret, path-style; CLI magpie s3 on s3://bucket/prefix access-key-id=… endpoint=… region=… path-style. The bucket holds the same passphrase-sealed file at <prefix>/magpie/magpie.magpie-backup, signed with SigV4 (no SDK). It is read with its ETag and written with If-Match (If-None-Match: * for the first), so two computers syncing at once don't overwrite each other; a server that refuses conditional writes (501, or 400 naming the header) is remembered and gets a HEAD-then-PUT instead. An IP, localhost or a dotted bucket on https goes path-style on its own. Errors say what to do: wrong key/secret, clock skew, bucket in another region (names it), no such bucket, 403 on the first read on AWS without s3:ListBucket. The secret is kept as the WebDAV password is, sent only to the endpoint and key it was typed for, and may not be the passphrase. sigv4_test (AWS's published vectors), s3_test (fake server: conditions, conflict, fallback, regions, errors), s3_cli_test and s3-sync.test.cjs (Chromium, WebKit, en/zh) fail without the change; tested against MinIO. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass (TestGroupAddSetRemove, a TempDir-cleanup flake under load, passes alone); click-scroll, old-webkit pass.
2026-09-30 17:07:47 +08:00
sync: a backup on a slow line is no longer cut off at 2 minutes; a server that stops moving is (#657, irx999: a 43 MB backup with many skills to a WebDAV server on a 2.4 Mbps VPS, 305 KB/s, needs 2.4 minutes and every sync failed) — a sync had a fixed deadline in all (2 minutes from the gateway's loop and magpie webdav/s3 sync, 90 s from Settings › Sync now), so a large backup on a slow line never got through, however steadily it moved. WebDAV and S3 requests now go through a watchdog instead (stall.go): the backup's GET and PUT fail once nothing has moved either way for 60 s, each byte of the body sent or read putting it back, and after a PUT's body is all handed over the answer gets 60 s on top of as long as the write took (at least 4 minutes), for what still sits in the system's buffers to leave; the other requests (PROPFIND, MKCOL, HEAD, MOVE, DELETE) have 30 s in all. A stall says so ("the server sent and took nothing for 1m0s (PUT)"). Sync now and the CLI have no deadline; the gateway's loop keeps an hour as a backstop; a wait for another magpie's sync stays 30 s. TestSlowTransferIsNotCutShort (20 MB up and down at a steady trickle, over 5 times the watchdog each way), TestStalledTransferFailsPromptly (a server stopping mid-PUT and mid-GET fails within a second) and TestMetadataRequestHasALimit fail on the old code (no watchdog: the stalled ones hang) and pass. go vet, builds (darwin, GOOS=linux, GOOS=windows) and go test -tags nogui -count=1 ./... under a temp HOME pass. Not tried against a real slow WebDAV server.
2026-10-03 16:10:02 +08:00
provider: a providers.json that can't be read is said where the providers are listed, never backed up or synced as none, and is replaced through a rename (PR #415's review) — #415 made edits refuse a file they couldn't read or decode, but every read for the user still took it as empty: magpie providers said "no providers yet", magpie models "no models yet", the Providers page opened the Add sheet as for a first use, and backup.Collect, so an export and a WebDAV/S3 sync, carried it as no providers, which another computer's Mirror would then take as every provider removed. magpie providers and magpie models now list what is left (the signed-in accounts) and end in the error, the TUI says it over its list, and the Providers page shows a "Your providers file can't be read" box (无法读取供应商配置文件) over the list with magpie's reason and no Add sheet; start-up, the gateway and the catalog still go on with it as empty. Stored and StoredGroups return the read error, so a backup and a sync stop on it with nothing pushed. The error, for reads and refused writes alike, names the file, says magpie left it unchanged and to fix it or move it aside (errors.Is ErrUnreadable). store writes through writePrivate, a 0600 temp file renamed over it (steady.Rename waits out a Windows reader holding it, a symlink keeps its target), instead of os.WriteFile's truncate-then-write, and the read goes through steady.ReadFile. TestFileErrorSaysUnreadable, TestWriteErrorsSayLeftUnchanged, TestStoredRefusesUnreadable, TestStoreReplacesAtomically, TestSyncStopsOnUnreadableProviders, TestProvidersCmdSaysUnreadable and provider-file-error.test.cjs fail without the change. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass; provider-file-error, click-scroll, old-webkit, providers-off-fold, add-sheet pass.
2026-10-01 19:45:24 +08:00