Files
yetone
84554e57e7
library: Claude Desktop takes skills, into Cowork's skills-plugin with their manifest entries (#638) — Desktop had MCP servers only and showed as "has no skills folder". Every account's local-agent-mode-sessions/skills-plugin/<org>/<account> (one with a manifest.json or .claude-plugin/plugin.json, in Claude and Claude-3p alike, no id hard-coded) gets a copy of each skill it is given — a real folder, as Cowork won't read a linked skill's other files from outside the plugin — and an entry in manifest.json (skillId, name, description from SKILL.md, creatorType user, syncManaged false, updatedAt, enabled), which Desktop lists from. The other entries and keys, and an entry's enabled and other fields, stay; times are written as the manifest's are (ms or ISO). A name Desktop has of its own (built in, or made there) is left and reported. The copy carries magpie's mark with the hash of what was copied: it is made again when the library's skill changes, left as it is once changed in Desktop (reported), and set aside into the backups rather than deleted when the library stops giving it; only magpie's copies and entries are ever taken out, and magpie's entry whose folder went gets it back. Desktop's own skills aren't offered to bring in. The Skills tab says Desktop shows changes once its window is reloaded (⌘R / Ctrl+R). TestClaudeDesktopSkills (two accounts, Claude and Claude-3p) and library-desktop-skills.test.cjs (WebKit, en/zh) cover it. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build and go test -tags nogui -count=1 ./... under a temp HOME pass. Not tried with a real Claude Desktop.
library: Antigravity is a Library target — rules, MCP servers and skills reach agy and the Antigravity app alike (#277) — both read their user-wide customizations from ~/.gemini/config: GEMINI.md there, mcp_config.json (a remote server written as agy's own
mcp add writes it, its serverUrl, "type": "sse" only for an SSE one so magpie reads it back as one; a url agy read in place of serverUrl is read too; the user's own servers and anything they added to an entry, disabled included, are kept) and skills; a project's skills go in the shared .agents/skills. The rules card says Antigravity also reads Gemini CLI's ~/.gemini/GEMINI.md, so text given to both is read twice. RTK is left out: rtk 0.50 has no user-wide hook for Antigravity. Tested with antigravity_test.go in a sandbox home (target paths and the antigravity-cli alias; stdio, http and sse servers written and read back, user keys and servers kept); library-items.test.cjs 18/18; go vet, go build (GUI, -tags nogui, GOOS=linux, GOOS=windows), go test -tags nogui ./... pass.
library: agents in a running WSL distro take skills, MCP servers and instructions (#331) — the Library knew only this machine's agent ids, so codex@wsl:Ubuntu and the like were never offered, and the id's colon was refused as an agent's name and can't be in a Windows file name. Claude Code, Codex, Pi and OmO in a distro now get them at their default places under the distro's $HOME through \\wsl.localhost, only while it runs (opening a stopped one's files starts it; its state is kept and asking for it says to start it). Skills go in as copies, made beside and renamed into place and made again when the library's changes, since a Linux agent can't follow a link to a Windows folder (project skills share the same copy code); an MCP server that runs a Windows program (C:\…, *.exe/.cmd/.bat/.ps1) is refused for them with a message; Pi there gets no MCP servers, where its version decides the file. The id's colon is a dot in file and folder names, and setup export/import turns it back. TestWSLTargets, TestWSLSkillsCopied, TestWSLServers and TestWSLInstructions (a fake distro) fail without the change. go vet (and GOOS=windows for agent, library), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass. Not run against a real distro.
library: agents in a running WSL distro take skills, MCP servers and instructions (#331) — the Library knew only this machine's agent ids, so codex@wsl:Ubuntu and the like were never offered, and the id's colon was refused as an agent's name and can't be in a Windows file name. Claude Code, Codex, Pi and OmO in a distro now get them at their default places under the distro's $HOME through \\wsl.localhost, only while it runs (opening a stopped one's files starts it; its state is kept and asking for it says to start it). Skills go in as copies, made beside and renamed into place and made again when the library's changes, since a Linux agent can't follow a link to a Windows folder (project skills share the same copy code); an MCP server that runs a Windows program (C:\…, *.exe/.cmd/.bat/.ps1) is refused for them with a message; Pi there gets no MCP servers, where its version decides the file. The id's colon is a dot in file and folder names, and setup export/import turns it back. TestWSLTargets, TestWSLSkillsCopied, TestWSLServers and TestWSLInstructions (a fake distro) fail without the change. go vet (and GOOS=windows for agent, library), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass. Not run against a real distro.
library: Claude Desktop's MCP servers go into Claude-3p/claude_desktop_config.json as well, where its 3p mode reads them (#297: Claude Desktop 使用 magpie 三方网关（3p）后，library 写入的 MCP 在 Desktop 里看不到) — in 3p mode, which magpie's own provider switch turns on, Desktop's whole userData is Claude-3p (~/Library/Application Support/Claude-3p, %LOCALAPPDATA%\Claude-3p on Windows, ~/.config/Claude-3p), its MCP servers included, so the servers the library wrote into Claude/'s file never showed in Settings → Developer. Where the Claude-3p folder is, its file is now written with Claude/'s, in one edit with each file's own keys kept, read for servers to bring in, and cleared on removal even when Claude/'s no longer has the entry — both, not whichever mode is on, so switching the provider leaves nothing stale and Desktop finds them in either mode; no Claude-3p folder is made for a Desktop never in 3p, and one only ever in 3p (no Claude folder) gets its servers there alone. A server given before reaches Claude-3p on the next sync. Tested with new desktop3p_test.go in a sandbox HOME (both files written and cleared, the user's servers and keys kept, sync of an older server, 3p only); each fails without the change. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass. Not tried against a real Desktop in 3p.
library: Claude Desktop takes skills, into Cowork's skills-plugin with their manifest entries (#638) — Desktop had MCP servers only and showed as "has no skills folder". Every account's local-agent-mode-sessions/skills-plugin/<org>/<account> (one with a manifest.json or .claude-plugin/plugin.json, in Claude and Claude-3p alike, no id hard-coded) gets a copy of each skill it is given — a real folder, as Cowork won't read a linked skill's other files from outside the plugin — and an entry in manifest.json (skillId, name, description from SKILL.md, creatorType user, syncManaged false, updatedAt, enabled), which Desktop lists from. The other entries and keys, and an entry's enabled and other fields, stay; times are written as the manifest's are (ms or ISO). A name Desktop has of its own (built in, or made there) is left and reported. The copy carries magpie's mark with the hash of what was copied: it is made again when the library's skill changes, left as it is once changed in Desktop (reported), and set aside into the backups rather than deleted when the library stops giving it; only magpie's copies and entries are ever taken out, and magpie's entry whose folder went gets it back. Desktop's own skills aren't offered to bring in. The Skills tab says Desktop shows changes once its window is reloaded (⌘R / Ctrl+R). TestClaudeDesktopSkills (two accounts, Claude and Claude-3p) and library-desktop-skills.test.cjs (WebKit, en/zh) cover it. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build and go test -tags nogui -count=1 ./... under a temp HOME pass. Not tried with a real Claude Desktop.
library: Claude Desktop takes skills, into Cowork's skills-plugin with their manifest entries (#638) — Desktop had MCP servers only and showed as "has no skills folder". Every account's local-agent-mode-sessions/skills-plugin/<org>/<account> (one with a manifest.json or .claude-plugin/plugin.json, in Claude and Claude-3p alike, no id hard-coded) gets a copy of each skill it is given — a real folder, as Cowork won't read a linked skill's other files from outside the plugin — and an entry in manifest.json (skillId, name, description from SKILL.md, creatorType user, syncManaged false, updatedAt, enabled), which Desktop lists from. The other entries and keys, and an entry's enabled and other fields, stay; times are written as the manifest's are (ms or ISO). A name Desktop has of its own (built in, or made there) is left and reported. The copy carries magpie's mark with the hash of what was copied: it is made again when the library's skill changes, left as it is once changed in Desktop (reported), and set aside into the backups rather than deleted when the library stops giving it; only magpie's copies and entries are ever taken out, and magpie's entry whose folder went gets it back. Desktop's own skills aren't offered to bring in. The Skills tab says Desktop shows changes once its window is reloaded (⌘R / Ctrl+R). TestClaudeDesktopSkills (two accounts, Claude and Claude-3p) and library-desktop-skills.test.cjs (WebKit, en/zh) cover it. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build and go test -tags nogui -count=1 ./... under a temp HOME pass. Not tried with a real Claude Desktop.
agents: dsh's patch list written in flow style is edited like a block one, and a file magpie can't edit is named as itself (#445) — a profile's cordis.patch.yml whose top-level array was written as [ { id: some-plugin, disabled: false } ] (valid YAML, and what dsh's own writers keep the template's [] as once they add a row) failed every model switch with "config.yaml is not a list of entries magpie can edit": the patch-list reader took only '- ' lines, and the error named config.yaml whatever the file; since web's list goes first, one such profile stopped all of them. New edit.BlockList reads a file whose one document is a flow sequence as the same list in block style (nested mappings and lists in block style, scalars quoted and tagged as they were, the lines before it and the comments after it kept); dsh's model/effort wiring and its MCP servers (internal/library) read and write such a file through it, and its errors name the real path. dshProfiles puts web first by partition instead of a sort whose less wasn't a strict weak order. TestDshFlowPatchList (agent, library) fails without the change; TestBlockList covers one-line, folded/nested/!!js, empty, CRLF and what isn't a flow list. Sandbox HOME: magpie dsh deepseek-v4-pro on main fails with the config.yaml error, with the change both profiles get the model and web keeps some-plugin. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass.
agents: dsh's patch list written in flow style is edited like a block one, and a file magpie can't edit is named as itself (#445) — a profile's cordis.patch.yml whose top-level array was written as [ { id: some-plugin, disabled: false } ] (valid YAML, and what dsh's own writers keep the template's [] as once they add a row) failed every model switch with "config.yaml is not a list of entries magpie can edit": the patch-list reader took only '- ' lines, and the error named config.yaml whatever the file; since web's list goes first, one such profile stopped all of them. New edit.BlockList reads a file whose one document is a flow sequence as the same list in block style (nested mappings and lists in block style, scalars quoted and tagged as they were, the lines before it and the comments after it kept); dsh's model/effort wiring and its MCP servers (internal/library) read and write such a file through it, and its errors name the real path. dshProfiles puts web first by partition instead of a sort whose less wasn't a strict weak order. TestDshFlowPatchList (agent, library) fails without the change; TestBlockList covers one-line, folded/nested/!!js, empty, CRLF and what isn't a flow list. Sandbox HOME: magpie dsh deepseek-v4-pro on main fails with the config.yaml error, with the change both profiles get the model and web keeps some-plugin. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass.
library: agents in a running WSL distro take skills, MCP servers and instructions (#331) — the Library knew only this machine's agent ids, so codex@wsl:Ubuntu and the like were never offered, and the id's colon was refused as an agent's name and can't be in a Windows file name. Claude Code, Codex, Pi and OmO in a distro now get them at their default places under the distro's $HOME through \\wsl.localhost, only while it runs (opening a stopped one's files starts it; its state is kept and asking for it says to start it). Skills go in as copies, made beside and renamed into place and made again when the library's changes, since a Linux agent can't follow a link to a Windows folder (project skills share the same copy code); an MCP server that runs a Windows program (C:\…, *.exe/.cmd/.bat/.ps1) is refused for them with a message; Pi there gets no MCP servers, where its version decides the file. The id's colon is a dot in file and folder names, and setup export/import turns it back. TestWSLTargets, TestWSLSkillsCopied, TestWSLServers and TestWSLInstructions (a fake distro) fail without the change. go vet (and GOOS=windows for agent, library), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass. Not run against a real distro.
library: a skill in the library's own folder is never copied onto itself, is shown and brought in where it is, and one kept in ~/.agents/skills isn't linked a second time into the agents that read that folder (#595)
library: RTK says when rtk isn't on the PATH the agents get, and puts it there when asked (#601, Moody-Sin: magpie好像没有正确安装RTK — Pi said "RTK disabled: rtk binary not found in PATH" while the Library showed RTK working) — rtk's hooks run it by name (Pi's extension probes rtk --version and turns itself off when that fails; Claude Code's and Codex's are rtk hook …; the commands they rewrite to are rtk git status and so on), but magpie looked for rtk in more places than an agent's PATH: ~/.local/bin and ~/.cargo/bin, which the app adds to its own PATH whether the user's shell has them or not (rtk's own install.sh puts it in ~/.local/bin and only warns when that isn't on PATH), and WinGet\Links on Windows, which winget doesn't always link into. So rtk was "installed", the agents were switched on with it by its whole path, and none of them could run it. Now the PATH a terminal opened now has is read — the login shell's (proc.LoginPath, the one UserPath already asks for, kept a minute) or on Windows the registry's (moved from provider's registryPath) — and when rtk isn't in it the RTK card says so, with what Put RTK on PATH will do, and each agent that has rtk is tagged Not on PATH (不在 PATH 中). Put RTK on PATH (magpie library rtk path) links rtk into the first of ~/.local/bin, ~/bin, /opt/homebrew/bin, /usr/local/bin, linuxbrew's bin, ~/.cargo/bin that is on that PATH and writable, or on Windows adds rtk's own folder to the user's PATH in the registry (a link needs Developer Mode, and a copy is left behind when winget upgrades rtk; winget's package folder doesn't change across upgrades) and tells Explorer; with no such folder it says which folder to add to PATH in the shell profile — shell profiles are never edited. rtk is also found in winget's package folder (WinGet\Packages\rtk-ai.rtk_*), and rtk's script upgrades a linked rtk where the link points, not over the link. TestRTKOffPath and library-rtk-path.test.cjs (en, zh) fail without the change. go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build and vet, go test -tags nogui -count=1 ./... under a temp HOME pass but the known TestFXInState flake. The Windows registry path is built, not run on Windows.
library: agents in a running WSL distro take skills, MCP servers and instructions (#331) — the Library knew only this machine's agent ids, so codex@wsl:Ubuntu and the like were never offered, and the id's colon was refused as an agent's name and can't be in a Windows file name. Claude Code, Codex, Pi and OmO in a distro now get them at their default places under the distro's $HOME through \\wsl.localhost, only while it runs (opening a stopped one's files starts it; its state is kept and asking for it says to start it). Skills go in as copies, made beside and renamed into place and made again when the library's changes, since a Linux agent can't follow a link to a Windows folder (project skills share the same copy code); an MCP server that runs a Windows program (C:\…, *.exe/.cmd/.bat/.ps1) is refused for them with a message; Pi there gets no MCP servers, where its version decides the file. The id's colon is a dot in file and folder names, and setup export/import turns it back. TestWSLTargets, TestWSLSkillsCopied, TestWSLServers and TestWSLInstructions (a fake distro) fail without the change. go vet (and GOOS=windows for agent, library), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass. Not run against a real distro.
library: MCP servers, skills and instructions are kept once in magpie and given to any agent from one place, with a market to find and add them (#29). Each agent reads MCP servers and skills from files of its own and in a format of its own, so one server was set up again in Claude Code, Codex, Gemini CLI, OpenCode, Pi, Goose, Cursor, Copilot CLI and Crush. The Library view keeps each once: a server is added (stdio, http or sse, its env and headers) and switched on per agent with its icon, and magpie writes it into each agent's config in that agent's format, leaving what the agent has of its own as it is; a server or skill an agent already has is shown, to bring into the library. A skill is a folder with a SKILL.md, kept in the library from GitHub (owner/repo, or a link to a folder in one; updated from it later) or linked from a folder on this machine, and linked into each agent's skills folder. The instructions every agent reads (CLAUDE.md, AGENTS.md, GEMINI.md…) can be kept as one too. The market offers checked MCP servers first, then the official MCP Registry's, filled in from what the registry says each needs (keys asked for in a form, never guessed), and skills.sh's most installed skills with what each says it is for; each shows its real icon (the vendor's own, else its GitHub owner's), fetched through magpie only for the icons the market or the library gave out, and an added server or skill keeps its icon in the library. What magpie changes in an agent's files is backed up first
settings: portable mode — a data folder beside magpie keeps everything magpie keeps (#508, suixinex) — like VS Code's portable mode, a folder named "data" (or a file named ".portable", the data folder then made beside it) next to magpie makes it keep all its own files there instead of the user's profile. Where magpie keeps its files is now decided in one place, internal/appdir: Config() (~/.config/magpie, $XDG_CONFIG_HOME/magpie; portable: data/), Cache() (~/.cache/magpie, $XDG_CACHE_HOME/magpie; portable: data/cache) and SystemCache() (the OS's cache folder, which the library's market lists and an update staged where magpie may not write used; portable: data/cache). settings.Dir()/Path(), provider.Path(), profile.Path(), the models.dev catalog, the exchange rate and the plugin market cache go through it, and everything built on them follows: providers, logins and saved accounts' folders, usage ledger, routing history and request archive, plugins, library, backups, sync state and lock, caller keys, redact key, stats. "Beside magpie" is the folder holding the executable with links followed; for a Mac app the folder holding Magpie.app (inside the bundle would break its signature), and for an AppImage the folder holding the .AppImage, not where it is mounted. The decision is made once, at start: an update moves the running copy aside (into .magpie-update on a Mac, to magpie.exe.old on Windows) and its files must not move with it; the updated copy replaces the executable or bundle only, so the data folder beside it is left alone. A portable magpie doesn't copy an old dial install's folders in. Not moved, as they aren't magpie's own: the agents' configs (~/.claude, ~/.codex…), the sign-ins agents keep in the system keychain (a saved Claude account's Claude Code keychain item is named after its folder's path on a Mac, so a portable folder moved elsewhere or to another Mac signs that account in again), autostart and link-handler registrations, and temporary folders. The single-instance id already covers the config folder, so a portable and an installed magpie run side by side, but the gateway port is one. Settings shows the config folder as portable. TestResolve (data folder, .portable, a file named data, a Mac bundle), TestResolveSymlinkedExe, TestResolveAppImage (Linux), TestFolders and TestPortableSettings (Path() lands in the data folder, Save writes there, ~/.config/magpie untouched); TestPortableSettings fails without the change (Path() is ~/.config/magpie/settings.json), TestResolveSymlinkedExe without following links. A nogui build run from a folder with data/ under a sandbox HOME wrote profiles.json, cli-identity.json and cache/models.json into data/ and nothing of magpie's into HOME. go vet ./internal/..., go build -tags nogui ./... (darwin, GOOS=linux), GOOS=windows go build ./..., go test -tags nogui ./... pass.
library: a remote MCP server signed in once in magpie is used by every agent without signing in again (#615) — a streamable-HTTP server behind OAuth (Neon, Notion, Supabase) had each agent run its own sign-in. The server's editor now has Sign in: magpie finds the authorization server from the server's 401 (RFC 9728 protected-resource metadata, RFC 8414/OIDC metadata, else the 2025-03 /authorize, /token, /register at its origin), registers itself (RFC 7591, a 127.0.0.1 redirect), opens the browser with PKCE S256 and the resource, and keeps the tokens in mcp-signins.json beside its other account secrets (0600, never the keychain). While signed in, the agents are given the gateway's /mcp/<name> for that server, without the Authorization the library has for it; the gateway passes POST (JSON or event stream), the GET stream and DELETE on with the Mcp-Session-Id and magpie's token, renews it 2 minutes before it runs out and once on a 401, one renewal per server at a time, and a sign-in the server won't renew is answered 502 "sign in to it again" (never a 401 the agent would act on). Signing out, a new URL or an SSE server gives the agents the server's own address as before; a rename keeps the sign-in and removing the server drops it. /mcp/ is local-only or LAN-shared with the key, and refuses a request with an Origin or a Host not naming this computer, so a web page can't borrow the sign-in through the browser (form posts, DNS rebinding), and isn't counted as busy or key-limited. WSL agents are given their distro's gateway address. The row says Signed in or Sign-in ran out; zh strings added. Tests: TestSignIn, TestSignInWithoutMetadata, TestSignInPage, TestNothingToSignIn, TestTokenRenewsBeforeItRunsOut (8 calls, 1 renewal), TestRenewRefused, TestRenewRefusedForGood, TestMCPProxy, TestMCPProxyStaysHere, TestMCPProxyNotForWebPages (fails without the Origin/Host check), TestSignedInServerGoesThroughMagpie against a local fake OAuth+MCP server; mcp-signin.test.cjs (webkit, en and zh). Not tried against a real Neon/Notion/Supabase sign-in. go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui -count=1 ./... under a temp HOME pass.
library: a remote MCP server signed in once in magpie is used by every agent without signing in again (#615) — a streamable-HTTP server behind OAuth (Neon, Notion, Supabase) had each agent run its own sign-in. The server's editor now has Sign in: magpie finds the authorization server from the server's 401 (RFC 9728 protected-resource metadata, RFC 8414/OIDC metadata, else the 2025-03 /authorize, /token, /register at its origin), registers itself (RFC 7591, a 127.0.0.1 redirect), opens the browser with PKCE S256 and the resource, and keeps the tokens in mcp-signins.json beside its other account secrets (0600, never the keychain). While signed in, the agents are given the gateway's /mcp/<name> for that server, without the Authorization the library has for it; the gateway passes POST (JSON or event stream), the GET stream and DELETE on with the Mcp-Session-Id and magpie's token, renews it 2 minutes before it runs out and once on a 401, one renewal per server at a time, and a sign-in the server won't renew is answered 502 "sign in to it again" (never a 401 the agent would act on). Signing out, a new URL or an SSE server gives the agents the server's own address as before; a rename keeps the sign-in and removing the server drops it. /mcp/ is local-only or LAN-shared with the key, and refuses a request with an Origin or a Host not naming this computer, so a web page can't borrow the sign-in through the browser (form posts, DNS rebinding), and isn't counted as busy or key-limited. WSL agents are given their distro's gateway address. The row says Signed in or Sign-in ran out; zh strings added. Tests: TestSignIn, TestSignInWithoutMetadata, TestSignInPage, TestNothingToSignIn, TestTokenRenewsBeforeItRunsOut (8 calls, 1 renewal), TestRenewRefused, TestRenewRefusedForGood, TestMCPProxy, TestMCPProxyStaysHere, TestMCPProxyNotForWebPages (fails without the Origin/Host check), TestSignedInServerGoesThroughMagpie against a local fake OAuth+MCP server; mcp-signin.test.cjs (webkit, en and zh). Not tried against a real Neon/Notion/Supabase sign-in. go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui -count=1 ./... under a temp HOME pass.
agent: MiniMax Code (#362) — MiniMax's mcode CLI (and its desktop app, same runtime) reads $MINIMAX_DATA_DIR/config.yaml, else ~/.minimax/config.yaml. Choosing a magpie model adds custom_provider.magpie there (the gateway, spoken to as Anthropic messages, with the catalog's models, efforts, limits and image support) and sets defaultModel to custom_provider:magpie/<model>; the user's own default and variant are kept and put back on reset, their comments, providers and keys on magpie's entry stay, and an emptied custom_provider goes. The Library installs skills into its skills folder; it reads no user-wide MCP file, so it gets no MCP target. Checked against @minimax-ai/code 0.5.10 in a sandbox HOME: mcode provider list shows magpie's entry and mcode exec reaches a fake upstream through it with magpie's key, model and effort; after a reset it loads the restored file. TestMiniMaxCode, TestMiniMaxCodeSync, TestMiniMaxCodeLeavesNoEmptyProviders, TestMiniMaxCodeDataDir and TestMiniMaxCodeSkills fail without the change. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass (TestUserPath and the Claude account tests pass alone).
agent: OmO (oh-my-openagent, omo-ai), a fork of Pi that keeps its own ~/.omo/agent, gets its own row: a magpie model sets settings.json's defaultProvider/defaultModel and magpie's provider in models.json there as Pi's does, $OMO_CODING_AGENT_DIR / $SENPI_CODING_AGENT_DIR are honoured, the Library writes its AGENTS.md, mcp.json and skills, and
omo update updates it (#264 rhyme227). Pi's own ~/.pi is left alone. piIn becomes piLike(at, id, name, dir) so both share one wiring. Tested with omo_test.go in agent and library (fail without the change); go vet, go build -tags nogui (darwin, GOOS=linux, GOOS=windows), go test -tags nogui ./... pass.
edit: a config kept as a symlink stays one when magpie saves or clears it (#323, jigaowan) — WriteAtomic wrote a temp file beside the path and renamed it over it, so a linked library.json, instructions.md, CLAUDE.md, settings.json or config.toml became a file of its own and the dotfiles target kept its old text; clearing instructions.md removed the link. Now a write goes to the file at the end of the links (the one it names when nothing is there yet, an error for a loop of links), keeping its mode, and clearing a linked file empties its target and keeps the link (Pi's migrated mcp.json stays as {}); a plain file is removed as before. Sign-ins and the Kiro/StepFun files magpie writes privately follow links the same way, and a failed edit rolled back deletes only what it made behind a link to nothing. TestWriteAtomicFollowsSymlink, TestRemoveKeepsSymlink, TestAtomicallyKeepsSymlink, TestLinkedFilesStayLinked and TestPrivateWritesKeepSymlink fail without the change. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass.
library: ZCode and Pi get a project's MCP servers too, and a project can be removed keeping what magpie wrote into it (#514, follow-up to #500: zcode支持项目级mcp添加 / pi也支持项目级mcp / 删除项目但保留mcp/skill) — a project's servers went only to Claude Code, Codex, Gemini CLI, Cursor and OpenCode, and Remove took every skill and server magpie had put in the folder away, so a project given some once had to stay in magpie for good. ZCode's project file is <project>/.zcode/config.json, servers under mcp.servers as in its user-wide ~/.zcode/cli/config.json (zcode.z.ai/en/docs/mcp-services, "Configuration Files and Default Load Paths": workspace scope, read before the user's, "enable": false the user's to set), written with fmtZCode (type, command/args/env or url/headers); Pi's is <project>/.pi/mcp.json, mcpServers as Pi's own MCP reads them once the project is trusted (pi.dev/docs/latest/mcp, "Configure servers"), written with fmtPiNative (command/args/env, url/headers, no type; SSE refused, as Pi refuses it), whatever extension the user's own Pi file is written for. Both are merged as the other agents' are: the user's keys, servers and comments stay, a server of the same name that isn't magpie's is left alone and said, a file magpie made (.pi/mcp.json) goes in the .gitignore and goes again once empty, and ZCode's user-wide file isn't touched. The page learns a project file's own SSE limit (projectNoSSE), so Pi's chip is greyed for an SSE server in a project even when its user-wide file (pi-mcp-adapter's) takes SSE; the trust note now names Pi beside Codex. The Remove dialog of a project magpie put anything in has "Keep its skills and MCP servers" / 保留项目里的技能和 MCP 服务器 (a checkbox row in the library's pick style, no coloured left border): checked, the text says what stays and Remove posts projects/remove with keep, and RemoveProject(dir, keep) only takes the project off the list — skills (links still following the library's), servers in the agents' files and magpie's .gitignore lines stay as they are, and nothing magpie does later (a sync, the server removed from the library) touches them; unchecked it removes as before. A one-off add without a project first (pick a folder from a server or skill) is not in this change. TestProjectServersZCodePi (ZCode's file with the user's model, server, enable:false and key kept beside magpie's three; Pi's file made in its shape, the SSE server refused with its reason, listed in .gitignore; ZCode's user-wide file unchanged; removing takes out only magpie's and the file it made) and TestRemoveProjectKeep (every file byte for byte after the removal, after a sync and after the server leaves the library) fail without the change, as does project-remove-keep.test.cjs (WebKit, and Chromium through a temp copy on plain chromium.launch(); en and zh: the box unchecked, its text, no stripe, pressing it scrolls nothing and swaps the text, Remove posts keep: true and says they were kept; a project with nothing written has no box and posts as before) against HEAD's assets. project-servers, click-scroll, library-items, library-all pass; menu-scroll and old-webkit fail the same on HEAD. No live config was read or written. go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui -count=1 ./... (under a temp HOME) pass (TestFXInState failed on a TempDir cleanup race twice in the full gui run, passes alone and on the rerun; untouched).
library: a remote MCP server signed in once in magpie is used by every agent without signing in again (#615) — a streamable-HTTP server behind OAuth (Neon, Notion, Supabase) had each agent run its own sign-in. The server's editor now has Sign in: magpie finds the authorization server from the server's 401 (RFC 9728 protected-resource metadata, RFC 8414/OIDC metadata, else the 2025-03 /authorize, /token, /register at its origin), registers itself (RFC 7591, a 127.0.0.1 redirect), opens the browser with PKCE S256 and the resource, and keeps the tokens in mcp-signins.json beside its other account secrets (0600, never the keychain). While signed in, the agents are given the gateway's /mcp/<name> for that server, without the Authorization the library has for it; the gateway passes POST (JSON or event stream), the GET stream and DELETE on with the Mcp-Session-Id and magpie's token, renews it 2 minutes before it runs out and once on a 401, one renewal per server at a time, and a sign-in the server won't renew is answered 502 "sign in to it again" (never a 401 the agent would act on). Signing out, a new URL or an SSE server gives the agents the server's own address as before; a rename keeps the sign-in and removing the server drops it. /mcp/ is local-only or LAN-shared with the key, and refuses a request with an Origin or a Host not naming this computer, so a web page can't borrow the sign-in through the browser (form posts, DNS rebinding), and isn't counted as busy or key-limited. WSL agents are given their distro's gateway address. The row says Signed in or Sign-in ran out; zh strings added. Tests: TestSignIn, TestSignInWithoutMetadata, TestSignInPage, TestNothingToSignIn, TestTokenRenewsBeforeItRunsOut (8 calls, 1 renewal), TestRenewRefused, TestRenewRefusedForGood, TestMCPProxy, TestMCPProxyStaysHere, TestMCPProxyNotForWebPages (fails without the Origin/Host check), TestSignedInServerGoesThroughMagpie against a local fake OAuth+MCP server; mcp-signin.test.cjs (webkit, en and zh). Not tried against a real Neon/Notion/Supabase sign-in. go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui -count=1 ./... under a temp HOME pass.
library: ZCode and Pi get a project's MCP servers too, and a project can be removed keeping what magpie wrote into it (#514, follow-up to #500: zcode支持项目级mcp添加 / pi也支持项目级mcp / 删除项目但保留mcp/skill) — a project's servers went only to Claude Code, Codex, Gemini CLI, Cursor and OpenCode, and Remove took every skill and server magpie had put in the folder away, so a project given some once had to stay in magpie for good. ZCode's project file is <project>/.zcode/config.json, servers under mcp.servers as in its user-wide ~/.zcode/cli/config.json (zcode.z.ai/en/docs/mcp-services, "Configuration Files and Default Load Paths": workspace scope, read before the user's, "enable": false the user's to set), written with fmtZCode (type, command/args/env or url/headers); Pi's is <project>/.pi/mcp.json, mcpServers as Pi's own MCP reads them once the project is trusted (pi.dev/docs/latest/mcp, "Configure servers"), written with fmtPiNative (command/args/env, url/headers, no type; SSE refused, as Pi refuses it), whatever extension the user's own Pi file is written for. Both are merged as the other agents' are: the user's keys, servers and comments stay, a server of the same name that isn't magpie's is left alone and said, a file magpie made (.pi/mcp.json) goes in the .gitignore and goes again once empty, and ZCode's user-wide file isn't touched. The page learns a project file's own SSE limit (projectNoSSE), so Pi's chip is greyed for an SSE server in a project even when its user-wide file (pi-mcp-adapter's) takes SSE; the trust note now names Pi beside Codex. The Remove dialog of a project magpie put anything in has "Keep its skills and MCP servers" / 保留项目里的技能和 MCP 服务器 (a checkbox row in the library's pick style, no coloured left border): checked, the text says what stays and Remove posts projects/remove with keep, and RemoveProject(dir, keep) only takes the project off the list — skills (links still following the library's), servers in the agents' files and magpie's .gitignore lines stay as they are, and nothing magpie does later (a sync, the server removed from the library) touches them; unchecked it removes as before. A one-off add without a project first (pick a folder from a server or skill) is not in this change. TestProjectServersZCodePi (ZCode's file with the user's model, server, enable:false and key kept beside magpie's three; Pi's file made in its shape, the SSE server refused with its reason, listed in .gitignore; ZCode's user-wide file unchanged; removing takes out only magpie's and the file it made) and TestRemoveProjectKeep (every file byte for byte after the removal, after a sync and after the server leaves the library) fail without the change, as does project-remove-keep.test.cjs (WebKit, and Chromium through a temp copy on plain chromium.launch(); en and zh: the box unchecked, its text, no stripe, pressing it scrolls nothing and swaps the text, Remove posts keep: true and says they were kept; a project with nothing written has no box and posts as before) against HEAD's assets. project-servers, click-scroll, library-items, library-all pass; menu-scroll and old-webkit fail the same on HEAD. No live config was read or written. go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui -count=1 ./... (under a temp HOME) pass (TestFXInState failed on a TempDir cleanup race twice in the full gui run, passes alone and on the rerun; untouched).
library: ZCode and Pi get a project's MCP servers too, and a project can be removed keeping what magpie wrote into it (#514, follow-up to #500: zcode支持项目级mcp添加 / pi也支持项目级mcp / 删除项目但保留mcp/skill) — a project's servers went only to Claude Code, Codex, Gemini CLI, Cursor and OpenCode, and Remove took every skill and server magpie had put in the folder away, so a project given some once had to stay in magpie for good. ZCode's project file is <project>/.zcode/config.json, servers under mcp.servers as in its user-wide ~/.zcode/cli/config.json (zcode.z.ai/en/docs/mcp-services, "Configuration Files and Default Load Paths": workspace scope, read before the user's, "enable": false the user's to set), written with fmtZCode (type, command/args/env or url/headers); Pi's is <project>/.pi/mcp.json, mcpServers as Pi's own MCP reads them once the project is trusted (pi.dev/docs/latest/mcp, "Configure servers"), written with fmtPiNative (command/args/env, url/headers, no type; SSE refused, as Pi refuses it), whatever extension the user's own Pi file is written for. Both are merged as the other agents' are: the user's keys, servers and comments stay, a server of the same name that isn't magpie's is left alone and said, a file magpie made (.pi/mcp.json) goes in the .gitignore and goes again once empty, and ZCode's user-wide file isn't touched. The page learns a project file's own SSE limit (projectNoSSE), so Pi's chip is greyed for an SSE server in a project even when its user-wide file (pi-mcp-adapter's) takes SSE; the trust note now names Pi beside Codex. The Remove dialog of a project magpie put anything in has "Keep its skills and MCP servers" / 保留项目里的技能和 MCP 服务器 (a checkbox row in the library's pick style, no coloured left border): checked, the text says what stays and Remove posts projects/remove with keep, and RemoveProject(dir, keep) only takes the project off the list — skills (links still following the library's), servers in the agents' files and magpie's .gitignore lines stay as they are, and nothing magpie does later (a sync, the server removed from the library) touches them; unchecked it removes as before. A one-off add without a project first (pick a folder from a server or skill) is not in this change. TestProjectServersZCodePi (ZCode's file with the user's model, server, enable:false and key kept beside magpie's three; Pi's file made in its shape, the SSE server refused with its reason, listed in .gitignore; ZCode's user-wide file unchanged; removing takes out only magpie's and the file it made) and TestRemoveProjectKeep (every file byte for byte after the removal, after a sync and after the server leaves the library) fail without the change, as does project-remove-keep.test.cjs (WebKit, and Chromium through a temp copy on plain chromium.launch(); en and zh: the box unchecked, its text, no stripe, pressing it scrolls nothing and swaps the text, Remove posts keep: true and says they were kept; a project with nothing written has no box and posts as before) against HEAD's assets. project-servers, click-scroll, library-items, library-all pass; menu-scroll and old-webkit fail the same on HEAD. No live config was read or written. go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui -count=1 ./... (under a temp HOME) pass (TestFXInState failed on a TempDir cleanup race twice in the full gui run, passes alone and on the rerun; untouched).
gui: a Discover card says Add again once its server or skill is removed (#300), and hovering today's bar in the daily trend keeps its tooltip (#309) — every library change went through change(), which redrew the library only; the market's "Added" marks were refreshed on window focus alone, so removing a server or skill, adding or renaming one in the editor, or pasting several left them stale. take() is now the one way the page accepts a library: when the servers' or skills' names change it clears the marks of those gone, redraws the market and fetches it again. RemoveServer drops the server's icon from library.json, unless another server runs the same thing. The Sessions tab re-reads every 15s, and with an agent at work today's numbers change, so the chart was rebuilt and today's bar under the pointer replaced, its tooltip with it; a redraw with the same days, metric and locale now updates the bars in place (heights, titles, peak). market-have.test.cjs and sessions-today.test.cjs (Chromium, WebKit, en/zh) and TestRemoveServerDropsItsIcon fail without the change. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass; sessions-overview, click-scroll, old-webkit, library-items, shared-skills pass.
library: Remove all beside Turn all on/off takes every skill out of the library at once (#449) — a library of many skills could only be emptied a row's Remove at a time. Remove all, in red, asks in the page first, naming the agents that lose the skills, the projects magpie placed them in, the folders that go to magpie's backups and those of the user's own that are only unlinked; Cancel sends nothing. Confirming sends every name in one call, library.RemoveSkills, which takes each as RemoveSkill does, the folders kept aside together under one backup; one that can't be taken out stays, and is said, while the rest go. magpie library skill rm --all does the same, asking y/N on a terminal and, with none, only with --yes. TestRemoveSkills and TestLibrarySkillRmAll fail without the change, as does remove-all-skills.test.cjs (Chromium and WebKit, English and Chinese); click-scroll, old-webkit, every-skill pass. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass (bar the known Claude account flake TestClaudeSignedOut).
library: RTK says when rtk isn't on the PATH the agents get, and puts it there when asked (#601, Moody-Sin: magpie好像没有正确安装RTK — Pi said "RTK disabled: rtk binary not found in PATH" while the Library showed RTK working) — rtk's hooks run it by name (Pi's extension probes rtk --version and turns itself off when that fails; Claude Code's and Codex's are rtk hook …; the commands they rewrite to are rtk git status and so on), but magpie looked for rtk in more places than an agent's PATH: ~/.local/bin and ~/.cargo/bin, which the app adds to its own PATH whether the user's shell has them or not (rtk's own install.sh puts it in ~/.local/bin and only warns when that isn't on PATH), and WinGet\Links on Windows, which winget doesn't always link into. So rtk was "installed", the agents were switched on with it by its whole path, and none of them could run it. Now the PATH a terminal opened now has is read — the login shell's (proc.LoginPath, the one UserPath already asks for, kept a minute) or on Windows the registry's (moved from provider's registryPath) — and when rtk isn't in it the RTK card says so, with what Put RTK on PATH will do, and each agent that has rtk is tagged Not on PATH (不在 PATH 中). Put RTK on PATH (magpie library rtk path) links rtk into the first of ~/.local/bin, ~/bin, /opt/homebrew/bin, /usr/local/bin, linuxbrew's bin, ~/.cargo/bin that is on that PATH and writable, or on Windows adds rtk's own folder to the user's PATH in the registry (a link needs Developer Mode, and a copy is left behind when winget upgrades rtk; winget's package folder doesn't change across upgrades) and tells Explorer; with no such folder it says which folder to add to PATH in the shell profile — shell profiles are never edited. rtk is also found in winget's package folder (WinGet\Packages\rtk-ai.rtk_*), and rtk's script upgrades a linked rtk where the link points, not over the link. TestRTKOffPath and library-rtk-path.test.cjs (en, zh) fail without the change. go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build and vet, go test -tags nogui -count=1 ./... under a temp HOME pass but the known TestFXInState flake. The Windows registry path is built, not run on Windows.
library: RTK says when rtk isn't on the PATH the agents get, and puts it there when asked (#601, Moody-Sin: magpie好像没有正确安装RTK — Pi said "RTK disabled: rtk binary not found in PATH" while the Library showed RTK working) — rtk's hooks run it by name (Pi's extension probes rtk --version and turns itself off when that fails; Claude Code's and Codex's are rtk hook …; the commands they rewrite to are rtk git status and so on), but magpie looked for rtk in more places than an agent's PATH: ~/.local/bin and ~/.cargo/bin, which the app adds to its own PATH whether the user's shell has them or not (rtk's own install.sh puts it in ~/.local/bin and only warns when that isn't on PATH), and WinGet\Links on Windows, which winget doesn't always link into. So rtk was "installed", the agents were switched on with it by its whole path, and none of them could run it. Now the PATH a terminal opened now has is read — the login shell's (proc.LoginPath, the one UserPath already asks for, kept a minute) or on Windows the registry's (moved from provider's registryPath) — and when rtk isn't in it the RTK card says so, with what Put RTK on PATH will do, and each agent that has rtk is tagged Not on PATH (不在 PATH 中). Put RTK on PATH (magpie library rtk path) links rtk into the first of ~/.local/bin, ~/bin, /opt/homebrew/bin, /usr/local/bin, linuxbrew's bin, ~/.cargo/bin that is on that PATH and writable, or on Windows adds rtk's own folder to the user's PATH in the registry (a link needs Developer Mode, and a copy is left behind when winget upgrades rtk; winget's package folder doesn't change across upgrades) and tells Explorer; with no such folder it says which folder to add to PATH in the shell profile — shell profiles are never edited. rtk is also found in winget's package folder (WinGet\Packages\rtk-ai.rtk_*), and rtk's script upgrades a linked rtk where the link points, not over the link. TestRTKOffPath and library-rtk-path.test.cjs (en, zh) fail without the change. go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build and vet, go test -tags nogui -count=1 ./... under a temp HOME pass but the known TestFXInState flake. The Windows registry path is built, not run on Windows.
library: RTK says when rtk isn't on the PATH the agents get, and puts it there when asked (#601, Moody-Sin: magpie好像没有正确安装RTK — Pi said "RTK disabled: rtk binary not found in PATH" while the Library showed RTK working) — rtk's hooks run it by name (Pi's extension probes rtk --version and turns itself off when that fails; Claude Code's and Codex's are rtk hook …; the commands they rewrite to are rtk git status and so on), but magpie looked for rtk in more places than an agent's PATH: ~/.local/bin and ~/.cargo/bin, which the app adds to its own PATH whether the user's shell has them or not (rtk's own install.sh puts it in ~/.local/bin and only warns when that isn't on PATH), and WinGet\Links on Windows, which winget doesn't always link into. So rtk was "installed", the agents were switched on with it by its whole path, and none of them could run it. Now the PATH a terminal opened now has is read — the login shell's (proc.LoginPath, the one UserPath already asks for, kept a minute) or on Windows the registry's (moved from provider's registryPath) — and when rtk isn't in it the RTK card says so, with what Put RTK on PATH will do, and each agent that has rtk is tagged Not on PATH (不在 PATH 中). Put RTK on PATH (magpie library rtk path) links rtk into the first of ~/.local/bin, ~/bin, /opt/homebrew/bin, /usr/local/bin, linuxbrew's bin, ~/.cargo/bin that is on that PATH and writable, or on Windows adds rtk's own folder to the user's PATH in the registry (a link needs Developer Mode, and a copy is left behind when winget upgrades rtk; winget's package folder doesn't change across upgrades) and tells Explorer; with no such folder it says which folder to add to PATH in the shell profile — shell profiles are never edited. rtk is also found in winget's package folder (WinGet\Packages\rtk-ai.rtk_*), and rtk's script upgrades a linked rtk where the link points, not over the link. TestRTKOffPath and library-rtk-path.test.cjs (en, zh) fail without the change. go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build and vet, go test -tags nogui -count=1 ./... under a temp HOME pass but the known TestFXInState flake. The Windows registry path is built, not run on Windows.
library: RTK says when rtk isn't on the PATH the agents get, and puts it there when asked (#601, Moody-Sin: magpie好像没有正确安装RTK — Pi said "RTK disabled: rtk binary not found in PATH" while the Library showed RTK working) — rtk's hooks run it by name (Pi's extension probes rtk --version and turns itself off when that fails; Claude Code's and Codex's are rtk hook …; the commands they rewrite to are rtk git status and so on), but magpie looked for rtk in more places than an agent's PATH: ~/.local/bin and ~/.cargo/bin, which the app adds to its own PATH whether the user's shell has them or not (rtk's own install.sh puts it in ~/.local/bin and only warns when that isn't on PATH), and WinGet\Links on Windows, which winget doesn't always link into. So rtk was "installed", the agents were switched on with it by its whole path, and none of them could run it. Now the PATH a terminal opened now has is read — the login shell's (proc.LoginPath, the one UserPath already asks for, kept a minute) or on Windows the registry's (moved from provider's registryPath) — and when rtk isn't in it the RTK card says so, with what Put RTK on PATH will do, and each agent that has rtk is tagged Not on PATH (不在 PATH 中). Put RTK on PATH (magpie library rtk path) links rtk into the first of ~/.local/bin, ~/bin, /opt/homebrew/bin, /usr/local/bin, linuxbrew's bin, ~/.cargo/bin that is on that PATH and writable, or on Windows adds rtk's own folder to the user's PATH in the registry (a link needs Developer Mode, and a copy is left behind when winget upgrades rtk; winget's package folder doesn't change across upgrades) and tells Explorer; with no such folder it says which folder to add to PATH in the shell profile — shell profiles are never edited. rtk is also found in winget's package folder (WinGet\Packages\rtk-ai.rtk_*), and rtk's script upgrades a linked rtk where the link points, not over the link. TestRTKOffPath and library-rtk-path.test.cjs (en, zh) fail without the change. go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build and vet, go test -tags nogui -count=1 ./... under a temp HOME pass but the known TestFXInState flake. The Windows registry path is built, not run on Windows.
library: RTK says when rtk isn't on the PATH the agents get, and puts it there when asked (#601, Moody-Sin: magpie好像没有正确安装RTK — Pi said "RTK disabled: rtk binary not found in PATH" while the Library showed RTK working) — rtk's hooks run it by name (Pi's extension probes rtk --version and turns itself off when that fails; Claude Code's and Codex's are rtk hook …; the commands they rewrite to are rtk git status and so on), but magpie looked for rtk in more places than an agent's PATH: ~/.local/bin and ~/.cargo/bin, which the app adds to its own PATH whether the user's shell has them or not (rtk's own install.sh puts it in ~/.local/bin and only warns when that isn't on PATH), and WinGet\Links on Windows, which winget doesn't always link into. So rtk was "installed", the agents were switched on with it by its whole path, and none of them could run it. Now the PATH a terminal opened now has is read — the login shell's (proc.LoginPath, the one UserPath already asks for, kept a minute) or on Windows the registry's (moved from provider's registryPath) — and when rtk isn't in it the RTK card says so, with what Put RTK on PATH will do, and each agent that has rtk is tagged Not on PATH (不在 PATH 中). Put RTK on PATH (magpie library rtk path) links rtk into the first of ~/.local/bin, ~/bin, /opt/homebrew/bin, /usr/local/bin, linuxbrew's bin, ~/.cargo/bin that is on that PATH and writable, or on Windows adds rtk's own folder to the user's PATH in the registry (a link needs Developer Mode, and a copy is left behind when winget upgrades rtk; winget's package folder doesn't change across upgrades) and tells Explorer; with no such folder it says which folder to add to PATH in the shell profile — shell profiles are never edited. rtk is also found in winget's package folder (WinGet\Packages\rtk-ai.rtk_*), and rtk's script upgrades a linked rtk where the link points, not over the link. TestRTKOffPath and library-rtk-path.test.cjs (en, zh) fail without the change. go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build and vet, go test -tags nogui -count=1 ./... under a temp HOME pass but the known TestFXInState flake. The Windows registry path is built, not run on Windows.
profiles: a saved profile keeps the Library's setup too, and switching to it switches that as well (#29) — which agents get each MCP server and skill, and the instructions (the shared text, the agents it is written to, what each gets besides), so moving from one profile to another left the tools and the instructions as they were and only the models followed. A profile keeps them under "library" beside its agent.field keys; the servers and skills themselves stay in the library, a profile only names them. Applying one sets the models as before, then gives each server and skill to the agents it names and puts the instructions back, written into the agents as any Library change is, their files and the library's own instructions kept aside first; one removed from the library since is skipped and said so, one added since keeps its agents (the profile knows nothing of it, and switching it off would lose it for good). A profile saved before, or while the library was empty, carries none and leaves the library as it is. magpie profiles, the TUI and the panel's chips say what a profile gives out (+ library: 2 servers, 1 skill, instructions)
library: agents in a running WSL distro take skills, MCP servers and instructions (#331) — the Library knew only this machine's agent ids, so codex@wsl:Ubuntu and the like were never offered, and the id's colon was refused as an agent's name and can't be in a Windows file name. Claude Code, Codex, Pi and OmO in a distro now get them at their default places under the distro's $HOME through \\wsl.localhost, only while it runs (opening a stopped one's files starts it; its state is kept and asking for it says to start it). Skills go in as copies, made beside and renamed into place and made again when the library's changes, since a Linux agent can't follow a link to a Windows folder (project skills share the same copy code); an MCP server that runs a Windows program (C:\…, *.exe/.cmd/.bat/.ps1) is refused for them with a message; Pi there gets no MCP servers, where its version decides the file. The id's colon is a dot in file and folder names, and setup export/import turns it back. TestWSLTargets, TestWSLSkillsCopied, TestWSLServers and TestWSLInstructions (a fake distro) fail without the change. go vet (and GOOS=windows for agent, library), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass. Not run against a real distro.
library: a skill in the library's own folder is never copied onto itself, is shown and brought in where it is, and one kept in ~/.agents/skills isn't linked a second time into the agents that read that folder (#595)
library: Claude Desktop takes skills, into Cowork's skills-plugin with their manifest entries (#638) — Desktop had MCP servers only and showed as "has no skills folder". Every account's local-agent-mode-sessions/skills-plugin/<org>/<account> (one with a manifest.json or .claude-plugin/plugin.json, in Claude and Claude-3p alike, no id hard-coded) gets a copy of each skill it is given — a real folder, as Cowork won't read a linked skill's other files from outside the plugin — and an entry in manifest.json (skillId, name, description from SKILL.md, creatorType user, syncManaged false, updatedAt, enabled), which Desktop lists from. The other entries and keys, and an entry's enabled and other fields, stay; times are written as the manifest's are (ms or ISO). A name Desktop has of its own (built in, or made there) is left and reported. The copy carries magpie's mark with the hash of what was copied: it is made again when the library's skill changes, left as it is once changed in Desktop (reported), and set aside into the backups rather than deleted when the library stops giving it; only magpie's copies and entries are ever taken out, and magpie's entry whose folder went gets it back. Desktop's own skills aren't offered to bring in. The Skills tab says Desktop shows changes once its window is reloaded (⌘R / Ctrl+R). TestClaudeDesktopSkills (two accounts, Claude and Claude-3p) and library-desktop-skills.test.cjs (WebKit, en/zh) cover it. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build and go test -tags nogui -count=1 ./... under a temp HOME pass. Not tried with a real Claude Desktop.
edit: a config kept as a symlink stays one when magpie saves or clears it (#323, jigaowan) — WriteAtomic wrote a temp file beside the path and renamed it over it, so a linked library.json, instructions.md, CLAUDE.md, settings.json or config.toml became a file of its own and the dotfiles target kept its old text; clearing instructions.md removed the link. Now a write goes to the file at the end of the links (the one it names when nothing is there yet, an error for a loop of links), keeping its mode, and clearing a linked file empties its target and keeps the link (Pi's migrated mcp.json stays as {}); a plain file is removed as before. Sign-ins and the Kiro/StepFun files magpie writes privately follow links the same way, and a failed edit rolled back deletes only what it made behind a link to nothing. TestWriteAtomicFollowsSymlink, TestRemoveKeepsSymlink, TestAtomicallyKeepsSymlink, TestLinkedFilesStayLinked and TestPrivateWritesKeepSymlink fail without the change. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass.
library: Claude Desktop takes skills, into Cowork's skills-plugin with their manifest entries (#638) — Desktop had MCP servers only and showed as "has no skills folder". Every account's local-agent-mode-sessions/skills-plugin/<org>/<account> (one with a manifest.json or .claude-plugin/plugin.json, in Claude and Claude-3p alike, no id hard-coded) gets a copy of each skill it is given — a real folder, as Cowork won't read a linked skill's other files from outside the plugin — and an entry in manifest.json (skillId, name, description from SKILL.md, creatorType user, syncManaged false, updatedAt, enabled), which Desktop lists from. The other entries and keys, and an entry's enabled and other fields, stay; times are written as the manifest's are (ms or ISO). A name Desktop has of its own (built in, or made there) is left and reported. The copy carries magpie's mark with the hash of what was copied: it is made again when the library's skill changes, left as it is once changed in Desktop (reported), and set aside into the backups rather than deleted when the library stops giving it; only magpie's copies and entries are ever taken out, and magpie's entry whose folder went gets it back. Desktop's own skills aren't offered to bring in. The Skills tab says Desktop shows changes once its window is reloaded (⌘R / Ctrl+R). TestClaudeDesktopSkills (two accounts, Claude and Claude-3p) and library-desktop-skills.test.cjs (WebKit, en/zh) cover it. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build and go test -tags nogui -count=1 ./... under a temp HOME pass. Not tried with a real Claude Desktop.
library: Claude Desktop takes skills, into Cowork's skills-plugin with their manifest entries (#638) — Desktop had MCP servers only and showed as "has no skills folder". Every account's local-agent-mode-sessions/skills-plugin/<org>/<account> (one with a manifest.json or .claude-plugin/plugin.json, in Claude and Claude-3p alike, no id hard-coded) gets a copy of each skill it is given — a real folder, as Cowork won't read a linked skill's other files from outside the plugin — and an entry in manifest.json (skillId, name, description from SKILL.md, creatorType user, syncManaged false, updatedAt, enabled), which Desktop lists from. The other entries and keys, and an entry's enabled and other fields, stay; times are written as the manifest's are (ms or ISO). A name Desktop has of its own (built in, or made there) is left and reported. The copy carries magpie's mark with the hash of what was copied: it is made again when the library's skill changes, left as it is once changed in Desktop (reported), and set aside into the backups rather than deleted when the library stops giving it; only magpie's copies and entries are ever taken out, and magpie's entry whose folder went gets it back. Desktop's own skills aren't offered to bring in. The Skills tab says Desktop shows changes once its window is reloaded (⌘R / Ctrl+R). TestClaudeDesktopSkills (two accounts, Claude and Claude-3p) and library-desktop-skills.test.cjs (WebKit, en/zh) cover it. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build and go test -tags nogui -count=1 ./... under a temp HOME pass. Not tried with a real Claude Desktop.
library: agents in a running WSL distro take skills, MCP servers and instructions (#331) — the Library knew only this machine's agent ids, so codex@wsl:Ubuntu and the like were never offered, and the id's colon was refused as an agent's name and can't be in a Windows file name. Claude Code, Codex, Pi and OmO in a distro now get them at their default places under the distro's $HOME through \\wsl.localhost, only while it runs (opening a stopped one's files starts it; its state is kept and asking for it says to start it). Skills go in as copies, made beside and renamed into place and made again when the library's changes, since a Linux agent can't follow a link to a Windows folder (project skills share the same copy code); an MCP server that runs a Windows program (C:\…, *.exe/.cmd/.bat/.ps1) is refused for them with a message; Pi there gets no MCP servers, where its version decides the file. The id's colon is a dot in file and folder names, and setup export/import turns it back. TestWSLTargets, TestWSLSkillsCopied, TestWSLServers and TestWSLInstructions (a fake distro) fail without the change. go vet (and GOOS=windows for agent, library), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass. Not run against a real distro.