Files
yetone
dbe2f01e7c
routing: the requests sit right under the stage, sized to stay in sight with it (Image #23: 这一块离那个路由动画距离太远了，用户点击了这里都不知道发生了什么) — the groups and the providers with several accounts or keys came between them, so a request picked in the list played on a stage scrolled out of sight above. They now come after the requests, and the list is as tall as leaves the stage in view above it (216–420px), scrolling on its own rather than the page. Picking a request no longer sends the list back to its top in WebKit (it was emptied and refilled, which reset its scroll). click-scroll.test.cjs brings a row into the list before picking it, as a reader would; Chromium and WebKit pass
agents: each agent's CLI shows its version and updates in one click (#202 JoeyMa-zh: Agents 页面增加"更新 CLI"功能 — 检查各 agent CLI 的版本并一键更新) — the Agents page now puts each CLI's installed version after its name (read with
<cli> --version, 10s timeout, no stdin) and, when a newer one is out and magpie can tell how it was installed, a small "Update to x.y.z" pill. How it was installed comes from the resolved binary: the vendor's own installer first (Claude Code's ~/.local/share/claude/versions → claude update, Codex standalone → codex update, ~/.opencode/bin → opencode upgrade), then a global node_modules (bun, pnpm, else npm, run as npm install -g --prefix <prefix> pkg@latest with that prefix's npm, and only where the prefix is writable), then a Homebrew formula or cask allowlisted per agent (brew upgrade [--cask]); anything else shows the version alone, with no button. The latest comes from the npm registry or brew info --json=v2 (no auto-update), cached 6h (15min after a failure); installed versions are cached by the binary's path, size and mtime. GET /api/agents/cli waits at most 3s and says pending, and the page asks again; POST /api/agents/cli/{id} runs the update (one at a time per agent, 10min cap), reads the version again and says so if it did not change, or gives the command's last lines when it fails. The pill goes busy in place and the page never scrolls; not in the tray panel. zh strings added. Tested with a new internal/agent/cliupdate_test.go (version order and parsing; npm/bun/pnpm/brew formula and cask/native installs, a read-only prefix, a local node_modules and unknown binaries in a fake PATH; an update against a fake registry and updater) and a new internal/gui/tests/cli-update.test.cjs in Chromium and WebKit (versions, pills only where magpie can update, row heights, an update with the view scrolled, a failing one, zh). No real update was run. go build (nogui, GOOS=windows, GOOS=linux), go test -tags nogui ./... and the GUI tests pass
cli: 新增 magpie webdav，在终端里开启、修改和触发 WebDAV 同步 / add magpie webdav to turn on, change and run WebDAV sync from the terminal (#127)
agents: a provider switched off or removed, or its last account signed out, moves the agents on its models to others (#200: 希望关闭某个llm provider的时候，更改agent选择的model到可用的model … 关闭这个provider之后，第一次使用会报错，因为copilot/ 开头的模型不存在) — switching Copilot off took copilot/… out of the catalog and the agents' model lists, but an agent picked on one kept it in its config and its next request was refused as switched off. Now every field on one of magpie's models (the model, Claude Code's opus/sonnet/haiku/fable tiers, any other) whose model the change stopped serving is moved: to the same model from a provider still on, the same id first, else one spelt another way (claude-sonnet-4.5 and claude-sonnet-4-5-20250929), else back to the agent's own default (a Claude Code tier: following the main model). It is done around switching off, removing, a key removed or off, and a sign-in signed out or off, in the window, the tray panel, the TUI and the CLI; the page's status line, the TUI and the CLI say which agent went to what. A session started before the switch still asks for the old model: the gateway now takes a switched-off provider's model as unserved, so Claude Code's stand-in (its model as set now) answers it rather than a refusal. Tested in a sandbox HOME: Claude Code on the main model and three tiers plus Hermes, switched off and removed (same id, other spelling, default, a tier following), switched on again moving nothing; /api/provider/off returns the moves; the gateway serves a switched-off model through the stand-in (fails without the change) and still refuses it to an agent left on it
routing: the requests sit right under the stage, sized to stay in sight with it (Image #23: 这一块离那个路由动画距离太远了，用户点击了这里都不知道发生了什么) — the groups and the providers with several accounts or keys came between them, so a request picked in the list played on a stage scrolled out of sight above. They now come after the requests, and the list is as tall as leaves the stage in view above it (216–420px), scrolling on its own rather than the page. Picking a request no longer sends the list back to its top in WebKit (it was emptied and refilled, which reset its scroll). click-scroll.test.cjs brings a row into the list before picking it, as a reader would; Chromium and WebKit pass
windows: the desktop app no longer opens a console window for every command it runs (#54) — it is linked as a GUI program and has no console, so each console CLI it started (devin auth status and models list, devin acp for every Devin turn, claude, codex, cursor-agent and grok probes and runs, grok login) was given a new console by Windows, and a Windows Terminal window with it, some every few seconds while the app sat idle. Every command magpie runs is now made through internal/proc, which starts it with CREATE_NO_WINDOW when magpie has no console of its own: the child gets a console without a window, and its output, which magpie always pipes back, arrives as before. A magpie run in a terminal (magpie serve, the TUI, the desktop app started from one with a command) has one, and its children share it as they did, so Ctrl+C there still reaches them. The relaunch after an update keeps its DETACHED_PROCESS, added to rather than replacing the flags it was made with, and a test fails on any command made with os/exec directly, so a new one can't bring the windows back
redact: a gateway's key in "key": "oc_sk_…" is masked, and Settings → Privacy takes the user's own masking rules (#195) — an OpenCode Go key in providers.json went to the vendor as it was: the API key rules wanted sk- with a hyphen, and a field called key alone was none of the secret field's names. Now a key of a gateway or relay, two to four letters and _sk_ (oc_sk_, or_sk_) with digits in it, is an API_KEY wherever it is, and a field named key and nothing more (not sort_key, monkey or obj.key) is a SECRET when its value is 16 or more letters and digits both, so a map's "key": "value" and key = "someIdentifier" are left alone; \"key\": \"…\" in JSON inside a string is found too. The secret field's names and its markers come from one list, so they can't drift apart, and of two rules finding the same value the first keeps it, so its placeholder no longer changes between an API_KEY and a SECRET from one request to the next. Masking rules, next to 脱敏词: a name for the placeholders (upper case letters, digits and _, 24 at most) and a prefix (then 8 or more key characters) or an RE2 regular expression, group 1 the value if it has one, masked with the secrets while 脱敏密钥 is on and put back as the others are, the user's name winning where one of magpie's finds the same value. They are set on their own: a pattern that doesn't compile, matches nothing at all, or is too long (300), a prefix under 3 or over 64, both at once, or more than 32 rules, is refused with the reason under the add row and what was typed kept. Tested: every row of the issue's table and the false positives, the rules' tidying, errors, stable placeholders, restore, overlaps, and kinds with digits in a stream; the settings file and the gateway's count_tokens with a rule; the page in a stub magpie web (add, a bad regex, remove, zh dark)
redact: a gateway's key in "key": "oc_sk_…" is masked, and Settings → Privacy takes the user's own masking rules (#195) — an OpenCode Go key in providers.json went to the vendor as it was: the API key rules wanted sk- with a hyphen, and a field called key alone was none of the secret field's names. Now a key of a gateway or relay, two to four letters and _sk_ (oc_sk_, or_sk_) with digits in it, is an API_KEY wherever it is, and a field named key and nothing more (not sort_key, monkey or obj.key) is a SECRET when its value is 16 or more letters and digits both, so a map's "key": "value" and key = "someIdentifier" are left alone; \"key\": \"…\" in JSON inside a string is found too. The secret field's names and its markers come from one list, so they can't drift apart, and of two rules finding the same value the first keeps it, so its placeholder no longer changes between an API_KEY and a SECRET from one request to the next. Masking rules, next to 脱敏词: a name for the placeholders (upper case letters, digits and _, 24 at most) and a prefix (then 8 or more key characters) or an RE2 regular expression, group 1 the value if it has one, masked with the secrets while 脱敏密钥 is on and put back as the others are, the user's name winning where one of magpie's finds the same value. They are set on their own: a pattern that doesn't compile, matches nothing at all, or is too long (300), a prefix under 3 or over 64, both at once, or more than 32 rules, is refused with the reason under the add row and what was typed kept. Tested: every row of the issue's table and the false positives, the rules' tidying, errors, stable placeholders, restore, overlaps, and kinds with digits in a stream; the settings file and the gateway's count_tokens with a rule; the page in a stub magpie web (add, a bad regex, remove, zh dark)
app: Magpie is in the Start menu on Windows (#158: Windows 便携版首次运行后，无法在开始菜单 / 系统搜索中找到 Magpie — @Aimer779) — the Windows build is one portable exe with no installer, so nothing put it anywhere Windows search looks. Each start of the desktop app (not the CLI, TUI or serve) now makes sure %APPDATA%\Microsoft\Windows\Start Menu\Programs\Magpie.lnk (the Programs known folder) opens the exe it runs as, symlinks resolved, in its folder, with its icon and "Magpie" as its description; one that already does is left be, one for where the exe was before it was moved is pointed here again. It is the shell's own link, made through WScript.Shell with go-ole (already in the build through Wails, now a direct require), in the background beside the magpie:// registration, and a failure is only logged. An update replaces the exe in place, so the shortcut stays good; a magpie left running from magpie.exe.old(-N) (or .new) points it at magpie.exe, never at what was moved aside. HKCU App Paths\magpie.exe is set to the exe (and its folder) so Win+R magpie opens it too. No uninstall entry, nothing copied. MAGPIE_NO_SHORTCUT=1 skips it (tests, sandboxes); other systems do nothing. Tested with the Windows test built here and run on Windows 11: a shortcut made, left as it was on a second start, pointed at the moved exe. Run on Windows 11 as the desktop app: the shortcut made with the exe's folder and icon, pointed anew after the exe moved, left as it was on a start with nothing changed; App Paths set
agents: a provider switched off or removed, or its last account signed out, moves the agents on its models to others (#200: 希望关闭某个llm provider的时候，更改agent选择的model到可用的model … 关闭这个provider之后，第一次使用会报错，因为copilot/ 开头的模型不存在) — switching Copilot off took copilot/… out of the catalog and the agents' model lists, but an agent picked on one kept it in its config and its next request was refused as switched off. Now every field on one of magpie's models (the model, Claude Code's opus/sonnet/haiku/fable tiers, any other) whose model the change stopped serving is moved: to the same model from a provider still on, the same id first, else one spelt another way (claude-sonnet-4.5 and claude-sonnet-4-5-20250929), else back to the agent's own default (a Claude Code tier: following the main model). It is done around switching off, removing, a key removed or off, and a sign-in signed out or off, in the window, the tray panel, the TUI and the CLI; the page's status line, the TUI and the CLI say which agent went to what. A session started before the switch still asks for the old model: the gateway now takes a switched-off provider's model as unserved, so Claude Code's stand-in (its model as set now) answers it rather than a refusal. Tested in a sandbox HOME: Claude Code on the main model and three tiers plus Hermes, switched off and removed (same id, other spelling, default, a tier following), switched on again moving nothing; /api/provider/off returns the moves; the gateway serves a switched-off model through the stand-in (fails without the change) and still refuses it to an agent left on it
web: magpie web knows its version and updates itself as the app does — the badge's restart puts the new version in and runs it in the old one's place with the same arguments and key, so the open page reloads onto it (#111); routing: a gateway served by magpie serve, which has no window, is told apart from another magpie's window, and the routing view says to stop it so this magpie serves the gateway and shows routing live (#110)