bluebluesoda
cf5c6af181
- the login page heading and the panel header (and their <title>) now use the configured name instead of the hard-coded "VPS Manager" - blank falls back to "VPS Manager", so existing config files are unchanged; clearing the key resets it - registry validation keeps it a single line of at most 60 characters; applied on panel restart like the other panel.* display settings - documented in the config example and the configuration reference
67 lines
4.1 KiB
Plaintext
67 lines
4.1 KiB
Plaintext
# vpsmgr config example — generated at /etc/vpsmgr/config.yaml on install
|
|
panel:
|
|
listen: ":8443" # a FRESH install picks a random free port in 2000-9999;
|
|
# this line is where it lands (change it only if you know why)
|
|
cert: /etc/vpsmgr/panel.crt
|
|
key: /etc/vpsmgr/panel.key
|
|
db: /etc/vpsmgr/vpsmgr.db
|
|
public_ip: AUTO # NIC IPv4 used by firewall/routing (private on NAT-ing clouds like AWS/Alibaba)
|
|
display_ip: AUTO # optional: address shown to users (panel URL / SSH hints); any string without spaces (IP or domain)
|
|
# auto-fetched from ipv4.ip.sb when public_ip is private; empty = fall back to public_ip
|
|
title: VPS Manager # name on the login page and in the panel header; empty = "VPS Manager"
|
|
session_days: 3
|
|
url_path: AUTO # 10-char random [a-zA-Z0-9_-] secret prefix, generated once at install
|
|
admin_url_path: AUTO # 10-char random secret prefix for the ADMIN panel; can be
|
|
# changed later or set to empty to disable the admin panel
|
|
admin_pass_hash: AUTO # bcrypt hash of the admin panel password; generated at install,
|
|
# reset via `vps admin-passwd`. No admin username — password only.
|
|
|
|
net:
|
|
# Container subnet 10.<n>.0.0/24, chosen ONCE at install (second octet n,
|
|
# default 115). Immutable: changing it after install breaks existing
|
|
# containers. The port scheme is fixed too: each container gets a random SSH
|
|
# port from 30000-31999 plus a whole-hundred block of 100 user ports.
|
|
subnet: "10.115.0.0/24"
|
|
gateway: "10.115.0.1"
|
|
# User-port ranges a NEW container's 100-port block is drawn from
|
|
# (comma-separated inclusive ranges; auto-aligned to whole hundreds).
|
|
# Default 10000-29999 = 200 containers. Use e.g. "10000-20000, 25000-30000"
|
|
# to skip a middle span the host needs for other services. Affects ONLY new
|
|
# containers — existing ones keep their ports. Since the user-port span the
|
|
# host reserves follows these ranges, an install's port-occupancy check scans
|
|
# only them. SSH ports (30000-31999) are NOT checked at install — each is
|
|
# probed at `vps add` time, and a busy port is simply skipped.
|
|
user_ports: "10000-29999"
|
|
v4_forward: true # true = direct IPv4 SSH/port forwarding
|
|
# false = IPv4 inbound fully off
|
|
# web-only = public IPv4 + HAProxy 80/443 domains,
|
|
# no direct IPv4 SSH/port forwarding
|
|
# NAT4 outbound remains enabled in every mode
|
|
haproxy: true # domain proxy (HAProxy). true = running and enabled
|
|
# at boot; false = stopped and disabled at boot, with
|
|
# existing domain records kept but no new domains
|
|
# accepted. Renamed from `traefik` — same values; a
|
|
# Traefik-era config carrying `traefik:` is read as-is
|
|
# and rewritten under the new name. Toggle at runtime:
|
|
# vps config set net.haproxy true|false
|
|
ext_if: AUTO # detected from default route
|
|
ipv6_mode: none # fixed at install: none, prefix, or pool
|
|
ipv6_subnet: "" # optional: global prefix for IPv6 pass-through, e.g. "2602:fada:6::/64".
|
|
# /64 or shorter uses the first /64; a provider /80 slice like
|
|
# "2406:da14:1dd2:a807:753a::/80" is also supported.
|
|
# empty = IPv6 disabled (default). Containers get global
|
|
# addresses via SLAAC; no NAT; set at install time.
|
|
ipv6_pool: [] # optional (pool mode): bare global IPv6 addresses or /128;
|
|
# addresses are assigned to containers until they are deleted.
|
|
|
|
incus:
|
|
image: "vpsmgr/debian-sshd"
|
|
image_fallback: "images:debian/13"
|
|
pool: vpsmgr
|
|
bridge: incusbr0
|
|
socket: "/var/lib/incus/unix.socket"
|
|
swap_ratio: 0.5 # 0 = no container swap; 0.5 = memory allowance / 2
|
|
|
|
snapshots:
|
|
limit: 1 # 0 disables new snapshots
|