cuicuiV5
57e6e30578
- Implemented LED indicator feature (24 brightness) - Migrated UAC microphone to hardware xfer_cb (fixed endpoint collision) - Rolled back ATVV strict 0x03 check to prevent infinite ping-pong loop - Rolled back HOGP keyboard release to fix modifier sticky keys - Rolled back Volume keys to TAP with repeat to preserve stability
83 lines
2.3 KiB
Python
83 lines
2.3 KiB
Python
import serial
|
|
import serial.tools.list_ports
|
|
import subprocess
|
|
import time
|
|
import sys
|
|
|
|
def get_esp_ports():
|
|
ports = []
|
|
for p in serial.tools.list_ports.comports():
|
|
if "303A" in p.hwid.upper():
|
|
ports.append(p.device)
|
|
return ports
|
|
|
|
def auto_upload():
|
|
ports = get_esp_ports()
|
|
if not ports:
|
|
print("No ESP32-S3 port found!")
|
|
sys.exit(1)
|
|
|
|
port = ports[0]
|
|
print(f"Detected ESP32 port: {port}")
|
|
|
|
# Trigger 1200bps DTR reset to enter bootloader
|
|
print("Triggering 1200bps CDC bootloader entry...")
|
|
try:
|
|
s = serial.Serial(port, 1200)
|
|
s.dtr = False
|
|
s.rts = True
|
|
time.sleep(0.1)
|
|
s.close()
|
|
except Exception as e:
|
|
pass
|
|
|
|
# Wait up to 3 seconds for bootloader port to appear
|
|
boot_port = None
|
|
for _ in range(15):
|
|
time.sleep(0.2)
|
|
cur = get_esp_ports()
|
|
if cur:
|
|
boot_port = cur[0]
|
|
break
|
|
|
|
if not boot_port:
|
|
boot_port = port
|
|
|
|
print(f"Targeting bootloader port: {boot_port}")
|
|
|
|
esptool_path = r"C:\Users\cuicuiV5\.platformio\packages\tool-esptoolpy\esptool.py"
|
|
bootloader = r".pio\build\esp32s3_n16r8\bootloader.bin"
|
|
partitions = r".pio\build\esp32s3_n16r8\partitions.bin"
|
|
boot_app0 = r"C:\Users\cuicuiV5\.platformio\packages\framework-arduinoespressif32\tools\partitions\boot_app0.bin"
|
|
firmware = r".pio\build\esp32s3_n16r8\firmware.bin"
|
|
|
|
# Crucial: app0 offset is 0x10000 for standard Arduino default_16MB.csv
|
|
cmd = [
|
|
sys.executable, esptool_path,
|
|
"--chip", "esp32s3",
|
|
"--port", boot_port,
|
|
"--baud", "460800",
|
|
"--before", "default_reset",
|
|
"--after", "hard_reset",
|
|
"write_flash", "-z",
|
|
"--flash_mode", "dio",
|
|
"--flash_freq", "80m",
|
|
"--flash_size", "16MB",
|
|
"0x0", bootloader,
|
|
"0x8000", partitions,
|
|
"0xe000", boot_app0,
|
|
"0x10000", firmware
|
|
]
|
|
|
|
print(f"Flashing firmware to {boot_port} (App offset: 0x10000, Mode: dio)...")
|
|
res = subprocess.run(cmd)
|
|
if res.returncode == 0:
|
|
print("\n==========================================")
|
|
print(" FLASH SUCCESSFUL! (App written to 0x10000)")
|
|
print("==========================================\n")
|
|
else:
|
|
sys.exit(res.returncode)
|
|
|
|
if __name__ == "__main__":
|
|
auto_upload()
|