yetone
88cccc184e
update: on Windows, an exe something holds open for a moment still goes aside for the new version, and one held for good says why in full, with the release page a click away (freecss on Discord: "0.1.628 已下载 · couldn't move magpie-windows-amd64.exe aside to put the new version in: rename C:\Us…") — InstallBinary renamed the running exe to .old once and gave up on the first error, which Go prints as "rename <exe> <exe>.old: <reason>", two full paths ahead of the reason, and the version row cut it off on one line, so what failed couldn't be read. A leftover .old was already handled (RemoveOld, then .old-2…, TestInstallBinaryBesideARunningOld), and Windows renames a running image (it is mapped with FILE_SHARE_DELETE), so the likely cause is another program holding the exe open without delete sharing — an antivirus scan, OneDrive or a similar sync client — or a folder that refuses the change (access denied); which one isn't known until the full message is read. moveAside now tries again for about 3 s (0.1, 0.2, 0.4, 0.8, 1.5 s apart), clearing a read-only attribute after the first failure, with a fresh .old name each try; a missing exe isn't retried. When it still can't, the message is the reason without the paths and what to do: ERROR_SHARING_VIOLATION/ERROR_LOCK_VIOLATION says another program has it open (often an antivirus or OneDrive), access denied names the folder Windows won't let magpie change, anything else says to download the new version; the download is kept for another try, as before. The version row wraps a failed install's or download's reason (.sub.wraps) with the whole text as its tooltip, and a ready-but-failed install offers Download, which opens the release page. The Windows test box wasn't reachable from this session (ssh key refused), so nothing ran on Windows; TestInstallBinaryHeldOpen (windows-only: an exe held open without FILE_SHARE_DELETE for 0.5 s still installs; held for good, the error says another program has it open and the download is kept) was cross-compiled with GOOS=windows go test -c but not run. TestMoveAsideTriesAgain and TestMoveAsideSaysWhy (portable, with a fake rename) and the new update-check.test.cjs case (webkit, en and zh: the reason is not cut off, its tooltip is the full text, Download opens the release page, a later state is one line again) fail without the change; Chromium couldn't launch here (its Playwright cache has no ICU data). go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build and vet, go test -tags nogui ./... pass (TestFXInState failed once on a TempDir cleanup race, passes on the rerun; untouched).
2026-10-02 13:26:54 +08:00
..
update: on Windows, an exe something holds open for a moment still goes aside for the new version, and one held for good says why in full, with the release page a click away (freecss on Discord: "0.1.628 已下载 · couldn't move magpie-windows-amd64.exe aside to put the new version in: rename C:\Us…") — InstallBinary renamed the running exe to .old once and gave up on the first error, which Go prints as "rename <exe> <exe>.old: <reason>", two full paths ahead of the reason, and the version row cut it off on one line, so what failed couldn't be read. A leftover .old was already handled (RemoveOld, then .old-2…, TestInstallBinaryBesideARunningOld), and Windows renames a running image (it is mapped with FILE_SHARE_DELETE), so the likely cause is another program holding the exe open without delete sharing — an antivirus scan, OneDrive or a similar sync client — or a folder that refuses the change (access denied); which one isn't known until the full message is read. moveAside now tries again for about 3 s (0.1, 0.2, 0.4, 0.8, 1.5 s apart), clearing a read-only attribute after the first failure, with a fresh .old name each try; a missing exe isn't retried. When it still can't, the message is the reason without the paths and what to do: ERROR_SHARING_VIOLATION/ERROR_LOCK_VIOLATION says another program has it open (often an antivirus or OneDrive), access denied names the folder Windows won't let magpie change, anything else says to download the new version; the download is kept for another try, as before. The version row wraps a failed install's or download's reason (.sub.wraps) with the whole text as its tooltip, and a ready-but-failed install offers Download, which opens the release page. The Windows test box wasn't reachable from this session (ssh key refused), so nothing ran on Windows; TestInstallBinaryHeldOpen (windows-only: an exe held open without FILE_SHARE_DELETE for 0.5 s still installs; held for good, the error says another program has it open and the download is kept) was cross-compiled with GOOS=windows go test -c but not run. TestMoveAsideTriesAgain and TestMoveAsideSaysWhy (portable, with a fake rename) and the new update-check.test.cjs case (webkit, en and zh: the reason is not cut off, its tooltip is the full text, Download opens the release page, a later state is one line again) fail without the change; Chromium couldn't launch here (its Playwright cache has no ICU data). go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build and vet, go test -tags nogui ./... pass (TestFXInState failed once on a TempDir cleanup race, passes on the rerun; untouched).
2026-10-02 13:26:54 +08:00
update: on Windows, an exe something holds open for a moment still goes aside for the new version, and one held for good says why in full, with the release page a click away (freecss on Discord: "0.1.628 已下载 · couldn't move magpie-windows-amd64.exe aside to put the new version in: rename C:\Us…") — InstallBinary renamed the running exe to .old once and gave up on the first error, which Go prints as "rename <exe> <exe>.old: <reason>", two full paths ahead of the reason, and the version row cut it off on one line, so what failed couldn't be read. A leftover .old was already handled (RemoveOld, then .old-2…, TestInstallBinaryBesideARunningOld), and Windows renames a running image (it is mapped with FILE_SHARE_DELETE), so the likely cause is another program holding the exe open without delete sharing — an antivirus scan, OneDrive or a similar sync client — or a folder that refuses the change (access denied); which one isn't known until the full message is read. moveAside now tries again for about 3 s (0.1, 0.2, 0.4, 0.8, 1.5 s apart), clearing a read-only attribute after the first failure, with a fresh .old name each try; a missing exe isn't retried. When it still can't, the message is the reason without the paths and what to do: ERROR_SHARING_VIOLATION/ERROR_LOCK_VIOLATION says another program has it open (often an antivirus or OneDrive), access denied names the folder Windows won't let magpie change, anything else says to download the new version; the download is kept for another try, as before. The version row wraps a failed install's or download's reason (.sub.wraps) with the whole text as its tooltip, and a ready-but-failed install offers Download, which opens the release page. The Windows test box wasn't reachable from this session (ssh key refused), so nothing ran on Windows; TestInstallBinaryHeldOpen (windows-only: an exe held open without FILE_SHARE_DELETE for 0.5 s still installs; held for good, the error says another program has it open and the download is kept) was cross-compiled with GOOS=windows go test -c but not run. TestMoveAsideTriesAgain and TestMoveAsideSaysWhy (portable, with a fake rename) and the new update-check.test.cjs case (webkit, en and zh: the reason is not cut off, its tooltip is the full text, Download opens the release page, a later state is one line again) fail without the change; Chromium couldn't launch here (its Playwright cache has no ICU data). go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build and vet, go test -tags nogui ./... pass (TestFXInState failed once on a TempDir cleanup race, passes on the rerun; untouched).
2026-10-02 13:26:54 +08:00
2026-09-30 18:31:08 +08:00
2026-10-02 03:32:41 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
agents: "Hide all" in an agent's model list keeps its line, and an uninstalled Gemini CLI goes from the Agents page (#356, #230) — the line under an agent ("Showing 0 / N models") came only when a picker still listed one of magpie's models, so hiding them all took away the one way back; it now stays while any is hidden. Gemini CLI was taken as present from what it leaves in ~/.gemini (settings.json, .env, installation_id…), which stays after it is uninstalled, so its row stayed, offering to set up a CLI that can't run; it is now its gemini binary. TestAgentModelLineAllHidden and TestGeminiNotAntigravity fail without the change; agent-models-all-hidden.test.cjs (Chromium, WebKit, en/zh) added. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./internal/agent ./internal/gui ./internal/library ./internal/provider pass; agent-models, click-scroll, old-webkit pass.
2026-10-01 01:03:57 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
settings: portable mode — a data folder beside magpie keeps everything magpie keeps (#508, suixinex) — like VS Code's portable mode, a folder named "data" (or a file named ".portable", the data folder then made beside it) next to magpie makes it keep all its own files there instead of the user's profile. Where magpie keeps its files is now decided in one place, internal/appdir: Config() (~/.config/magpie, $XDG_CONFIG_HOME/magpie; portable: data/), Cache() (~/.cache/magpie, $XDG_CACHE_HOME/magpie; portable: data/cache) and SystemCache() (the OS's cache folder, which the library's market lists and an update staged where magpie may not write used; portable: data/cache). settings.Dir()/Path(), provider.Path(), profile.Path(), the models.dev catalog, the exchange rate and the plugin market cache go through it, and everything built on them follows: providers, logins and saved accounts' folders, usage ledger, routing history and request archive, plugins, library, backups, sync state and lock, caller keys, redact key, stats. "Beside magpie" is the folder holding the executable with links followed; for a Mac app the folder holding Magpie.app (inside the bundle would break its signature), and for an AppImage the folder holding the .AppImage, not where it is mounted. The decision is made once, at start: an update moves the running copy aside (into .magpie-update on a Mac, to magpie.exe.old on Windows) and its files must not move with it; the updated copy replaces the executable or bundle only, so the data folder beside it is left alone. A portable magpie doesn't copy an old dial install's folders in. Not moved, as they aren't magpie's own: the agents' configs (~/.claude, ~/.codex…), the sign-ins agents keep in the system keychain (a saved Claude account's Claude Code keychain item is named after its folder's path on a Mac, so a portable folder moved elsewhere or to another Mac signs that account in again), autostart and link-handler registrations, and temporary folders. The single-instance id already covers the config folder, so a portable and an installed magpie run side by side, but the gateway port is one. Settings shows the config folder as portable. TestResolve (data folder, .portable, a file named data, a Mac bundle), TestResolveSymlinkedExe, TestResolveAppImage (Linux), TestFolders and TestPortableSettings (Path() lands in the data folder, Save writes there, ~/.config/magpie untouched); TestPortableSettings fails without the change (Path() is ~/.config/magpie/settings.json), TestResolveSymlinkedExe without following links. A nogui build run from a folder with data/ under a sandbox HOME wrote profiles.json, cli-identity.json and cache/models.json into data/ and nothing of magpie's into HOME. go vet ./internal/..., go build -tags nogui ./... (darwin, GOOS=linux), GOOS=windows go build ./..., go test -tags nogui ./... pass.
2026-10-02 13:00:22 +08:00
gui: after an update the window shows what changed since the version last run (a Discord user: 点更新后能弹个窗显示更新了啥吗, to see whether their issue was fixed) — magpie updated itself silently, and its release notes were only on GitHub. The version last run is now kept in magpie's own folder (last-version); started on a newer release, the window or magpie web's page asks usemagpie.ai's new /api/notes (beside /api/latest; site/worker.js lists the releases' notes from GitHub, cached as the feed is) for every release since, newest first, without their Install section, and shows them once in a What's new dialog. A fresh install, the same version, a downgrade or a build from source shows nothing; a magpie from before the version was kept, already in use, shows its own version's notes; offline nothing is shown and nothing waits on it; until the site is deployed, the update feed's newest notes stand in when they are the current version's. The tray's panel shows no dialog. The notes are drawn as text, never as HTML: headings, bullets, bold, code, http(s) links, and #NNN links to the issue, opened in the browser as the app's other links are. Settings has a What's new row under Version that opens them again, with a waiting update's notes first, marked Not installed yet; /api/update's notes leave out the Install section too. TestShowNotes, TestStripInstall, TestBetween, TestNotesBetween, TestWhatsNewAfterUpgrade, TestWhatsNewFromBefore, TestUpdateNotesWithoutInstall and whats-new.test.cjs (Chromium, WebKit, en, zh) fail without the change. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass; click-scroll, old-webkit, update-check, update-hide pass.
2026-10-02 03:57:55 +08:00
archive: a request the archive kept is opened and downloaded from the Usage page, with its bodies whole (jorben, #447: 请求存档 reachable from usage history, full bodies, download) — the archive's name was only on the Gateway page's recent calls, gone once a call left the list or the gateway restarted, and the archive kept the first 256 KB of each body, the recent list's cut. The usage ledger's row now names the call's archive (archive in usage.jsonl, kept through the Requests page's packed rows), and its details on Usage → Requests show the Request archive panel, Fetch from archive and Download; with the archive on, a request it has no copy of says "Not archived". The bodies are kept whole up to requestArchiveMaxMB in settings.json (32 MB unless set, at most 1024): the response is teed to a temp file as it is sent, the request body written to one when the call ends, so the upload queue holds file handles, not bodies, and one upload at a time reads them; a body past the limit is kept to it and marked cut, with its whole size. What goes upstream is unchanged, the archive stays off unless turned on, headers and bodies are scrubbed as before, and the temp files are removed after the upload or when the queue is full. The page is sent a body to show only when it is 256 KB or less (a longer one is said by its size), an archive over 80 MB is only said to be; Download streams the object whole, to Downloads in the app (archive/export, -2, -3… for a name taken) and as the browser's download in magpie web (archive/file). TestArchiveWholeBodies, TestArchiveLimit, TestRowKeepsArchive and TestArchivePreviewAndDownload fail without the change; TestArchiveOffUsage, TestArchiveTooLargeToPreview, TestArchiveOldPreview keep the rest. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass; request-archive-usage (new), request-archive, click-scroll, old-webkit, usage-ledger, usage-ledger-detail, usage-ledger-content, web-page, sse-body pass.
2026-10-02 00:57:51 +08:00
archive: a request the archive kept is opened and downloaded from the Usage page, with its bodies whole (jorben, #447: 请求存档 reachable from usage history, full bodies, download) — the archive's name was only on the Gateway page's recent calls, gone once a call left the list or the gateway restarted, and the archive kept the first 256 KB of each body, the recent list's cut. The usage ledger's row now names the call's archive (archive in usage.jsonl, kept through the Requests page's packed rows), and its details on Usage → Requests show the Request archive panel, Fetch from archive and Download; with the archive on, a request it has no copy of says "Not archived". The bodies are kept whole up to requestArchiveMaxMB in settings.json (32 MB unless set, at most 1024): the response is teed to a temp file as it is sent, the request body written to one when the call ends, so the upload queue holds file handles, not bodies, and one upload at a time reads them; a body past the limit is kept to it and marked cut, with its whole size. What goes upstream is unchanged, the archive stays off unless turned on, headers and bodies are scrubbed as before, and the temp files are removed after the upload or when the queue is full. The page is sent a body to show only when it is 256 KB or less (a longer one is said by its size), an archive over 80 MB is only said to be; Download streams the object whole, to Downloads in the app (archive/export, -2, -3… for a name taken) and as the browser's download in magpie web (archive/file). TestArchiveWholeBodies, TestArchiveLimit, TestRowKeepsArchive and TestArchivePreviewAndDownload fail without the change; TestArchiveOffUsage, TestArchiveTooLargeToPreview, TestArchiveOldPreview keep the rest. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass; request-archive-usage (new), request-archive, click-scroll, old-webkit, usage-ledger, usage-ledger-detail, usage-ledger-content, web-page, sse-body pass.
2026-10-02 00:57:51 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
2026-09-27 03:44:55 +08:00
catalog: fetched again each day magpie stays open, and sooner when a call's model has no price, so a model models.dev lists after magpie started is priced (#224 Koohoko: gpt-6.1-sol shows no cost) — the models.dev catalog, where list prices come from, was fetched only at the app's start (when older than a week), so a magpie left open, or magpie serve, never learned a new model's price. KeepFresh (internal/catalog/fresh.go), run by the app's backend and by magpie serve, looks every hour and fetches when the cache is older than a day; a call whose model has no price asks for a fetch (catalog.Missing, from usage's pricer) when the cache is older than six hours and none was tried in that time, only in a process keeping it fresh, so CLI commands and tests never fetch on their own. Loading and Reset now share a mutex instead of a sync.Once reassigned under a running Do, which a background Sync could hit while a call was being priced. Tested with fresh_test.go against a fake models.dev in a temp XDG_CACHE_HOME: stale after 25h and not before, Missing fetching nothing when not keeping, fetching once when keeping and gpt-6.1-sol then priced, and not again; passes under -race (failed under -race with the Once). go vet, go build -tags nogui (and GOOS=linux, GOOS=windows) and go test -tags nogui ./... pass.
2026-09-30 04:28:01 +08:00
agent: OmO (oh-my-openagent, omo-ai), a fork of Pi that keeps its own ~/.omo/agent, gets its own row: a magpie model sets settings.json's defaultProvider/defaultModel and magpie's provider in models.json there as Pi's does, $OMO_CODING_AGENT_DIR / $SENPI_CODING_AGENT_DIR are honoured, the Library writes its AGENTS.md, mcp.json and skills, and omo update updates it (#264 rhyme227). Pi's own ~/.pi is left alone. piIn becomes piLike(at, id, name, dir) so both share one wiring. Tested with omo_test.go in agent and library (fail without the change); go vet, go build -tags nogui (darwin, GOOS=linux, GOOS=windows), go test -tags nogui ./... pass.
2026-09-30 11:38:07 +08:00
2026-09-28 14:54:04 +08:00
2026-09-28 14:54:04 +08:00
gui: one magpie in Omarchy's tray, not two (songlairui on X: 为什么我的 omarchy 上会有两只喜鹊，一起来，一起退) — Wails' tray takes the name org.kde.StatusNotifierItem-<pid>-1 and registers with the watcher by its path, which Quickshell's watcher files under the connection's own name (:1.x); something on their system also registered the well-known name, and Quickshell tells items apart by how they were named, not by who owns them, so the one icon was two items (another app of theirs was doubled the same way). magpie now gives the name up once the tray has taken it: a registration by that name is refused, and one made already is dropped with it. In the Omarchy VM, registering the name before the change showed :1.328/StatusNotifierItem and org.kde.StatusNotifierItem-123846-1/StatusNotifierItem; after it, one item, the icon still in the bar. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass; built with -tags gtk3 on the VM.
2026-09-30 17:10:09 +08:00
gui: one magpie in Omarchy's tray, not two (songlairui on X: 为什么我的 omarchy 上会有两只喜鹊，一起来，一起退) — Wails' tray takes the name org.kde.StatusNotifierItem-<pid>-1 and registers with the watcher by its path, which Quickshell's watcher files under the connection's own name (:1.x); something on their system also registered the well-known name, and Quickshell tells items apart by how they were named, not by who owns them, so the one icon was two items (another app of theirs was doubled the same way). magpie now gives the name up once the tray has taken it: a registration by that name is refused, and one made already is dropped with it. In the Omarchy VM, registering the name before the change showed :1.328/StatusNotifierItem and org.kde.StatusNotifierItem-123846-1/StatusNotifierItem; after it, one item, the icon still in the bar. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass; built with -tags gtk3 on the VM.
2026-09-30 17:10:09 +08:00
2026-10-01 21:28:54 +08:00
2026-10-01 21:28:54 +08:00
2026-10-01 21:28:54 +08:00
2026-09-29 11:59:57 +08:00
2026-10-01 11:25:29 +08:00
2026-09-28 18:56:50 +08:00
2026-09-28 18:56:50 +08:00
web: magpie web serves the app's window to a browser, with the gateway beside it — for a computer that can't show the app: no desktop, WSL, a server over SSH, or the CLI-only build, which now carries the page too (what of the app needs Wails is left out of nogui builds). Every request needs this run's key, which the printed link carries and trades for a cookie other sites' pages can't send with a POST; --lan serves it on the network too, with a warning, --addr elsewhere, --no-open leaves the browser shut. In the browser the page opens links and sign-ins itself, names a folder instead of opening it, and leaves out the tray, the Dock and open at login. Tested from a nogui build in a sandbox: no key, a wrong key and a cookieless POST are refused; with the link Agents, Providers and Settings load and a setting saves. Issue #102
2026-09-27 16:21:26 +08:00
2026-09-28 17:51:03 +08:00
2026-09-30 11:22:21 +08:00
web: magpie web serves the app's window to a browser, with the gateway beside it — for a computer that can't show the app: no desktop, WSL, a server over SSH, or the CLI-only build, which now carries the page too (what of the app needs Wails is left out of nogui builds). Every request needs this run's key, which the printed link carries and trades for a cookie other sites' pages can't send with a POST; --lan serves it on the network too, with a warning, --addr elsewhere, --no-open leaves the browser shut. In the browser the page opens links and sign-ins itself, names a folder instead of opening it, and leaves out the tray, the Dock and open at login. Tested from a nogui build in a sandbox: no key, a wrong key and a cookieless POST are refused; with the link Agents, Providers and Settings load and a setting saves. Issue #102
2026-09-27 16:21:26 +08:00
web: magpie web serves the app's window to a browser, with the gateway beside it — for a computer that can't show the app: no desktop, WSL, a server over SSH, or the CLI-only build, which now carries the page too (what of the app needs Wails is left out of nogui builds). Every request needs this run's key, which the printed link carries and trades for a cookie other sites' pages can't send with a POST; --lan serves it on the network too, with a warning, --addr elsewhere, --no-open leaves the browser shut. In the browser the page opens links and sign-ins itself, names a folder instead of opening it, and leaves out the tray, the Dock and open at login. Tested from a nogui build in a sandbox: no key, a wrong key and a cookieless POST are refused; with the link Agents, Providers and Settings load and a setting saves. Issue #102
2026-09-27 16:21:26 +08:00
2026-09-30 12:14:41 +08:00
web: magpie web serves the app's window to a browser, with the gateway beside it — for a computer that can't show the app: no desktop, WSL, a server over SSH, or the CLI-only build, which now carries the page too (what of the app needs Wails is left out of nogui builds). Every request needs this run's key, which the printed link carries and trades for a cookie other sites' pages can't send with a POST; --lan serves it on the network too, with a warning, --addr elsewhere, --no-open leaves the browser shut. In the browser the page opens links and sign-ins itself, names a folder instead of opening it, and leaves out the tray, the Dock and open at login. Tested from a nogui build in a sandbox: no key, a wrong key and a cookieless POST are refused; with the link Agents, Providers and Settings load and a setting saves. Issue #102
2026-09-27 16:21:26 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
settings: a Text size preference (文字大小) that makes everything in magpie's windows larger, 100/110/125/150%, with Ctrl/Cmd + = − 0 in the window and the tray panel, and Windows' text drawn in its own UI faces (Discord, Clarence Dan: the font size is hard on the eyes on Windows) — Settings → Preferences gains a Text size row under Language whose pick posts to a new POST /api/settings/text-size (saved as settings.TextSize, validated against 100/110/125/150, 0 read as 100, and kept by the Settings page's general save, which never sends it). The size is each webview's own zoom, as a browser zooms, not CSS zoom: CSS zoom leaves getBoundingClientRect and clientX in zoomed pixels while offsets, scrollTop and 100vh are not, and app.js, routing.js and library.js place menus, popovers and the panel's height by those measures; under the webview's zoom the page is laid out again in fewer, larger CSS pixels and every measure agrees. Windows and Linux use Wails' SetZoom (WebView2's zoom factor, WebKitGTK's zoom level; the Zoom window option at creation, so the pages open at the saved size), the Mac WKWebView.pageZoom through cgo (macOS 11+), since Wails' Mac zoom is magnification, which lays nothing out again. None is under 100% because Wails clamps SetZoom below 1 on Windows and Linux. The windows grow around the pages: the panel's width and the height its page asks for (still in CSS pixels) are multiplied by the zoom, capped at the screen's work area (textsize.go panelFrame), and resized at once when the size changes; the main window's minimum is 560×420 CSS pixels at the size, capped by the screen, so a window smaller than that grows. Runtime changes wait for the app to be ready (whenReady), and at startup the Mac applies the zoom once its webviews exist. The Mac header, drawn under the native traffic lights which do not grow, divides its height, left padding and the modal's top by --zoom (set from boot.js before the first paint and from the settings), so it stays 50 points tall and level with them. The shortcuts are Cmd on the Mac and Ctrl elsewhere (the other modifier does nothing), step through the sizes and 0 goes back to 100%, with a "Text size 125%" toast; in magpie web the row is hidden and the keys are left to the browser's own zoom. On Windows the page names its faces (html.win): Segoe UI Variable Text, Segoe UI, then Microsoft YaHei UI for Chinese rather than whatever WebView2 falls back to; the Mac and Linux stack is unchanged, and there is no automatic size bump. New strings in en and zh. Tested: internal/gui/tests/text-size.test.cjs in Chromium and WebKit, en and zh, light and dark — a pick posts and does not scroll the settings page, stays picked after a reload with --zoom from boot.js, the Settings page's other saves leave it, the shortcuts step and reset in the window and the panel, and at 150% (the smallest window, 840×630 points, as 560×420 CSS pixels at device scale 1.5) no view, the header or the panel runs off to the side, the Mac header is 50 points; screenshots at 100% and 150% looked at. currency.test.cjs's viewport is 480 tall instead of 420, as settings-groups' is: the new row put the Currency control under the footer, where WebKit's hover could not reach it. Go: TestTextSizeFrames (panel and window sizes) and TestTextSizeSetting (the endpoint saves, zooms the windows, rejects 133, survives the general save, boot.js carries it) in internal/gui, and the settings round trip. go build -tags nogui (and GOOS=linux, GOOS=windows, plain darwin), go test -tags nogui ./... (TestUserPath flaked once under load and passes alone) and the whole GUI suite with --test-concurrency=2 pass. Not tried in the real Wails window on any platform: the Mac pageZoom, WebView2's zoom factor with the resized panel and the Windows font are untested there.
2026-09-30 02:51:17 +08:00
settings: a Text size preference (文字大小) that makes everything in magpie's windows larger, 100/110/125/150%, with Ctrl/Cmd + = − 0 in the window and the tray panel, and Windows' text drawn in its own UI faces (Discord, Clarence Dan: the font size is hard on the eyes on Windows) — Settings → Preferences gains a Text size row under Language whose pick posts to a new POST /api/settings/text-size (saved as settings.TextSize, validated against 100/110/125/150, 0 read as 100, and kept by the Settings page's general save, which never sends it). The size is each webview's own zoom, as a browser zooms, not CSS zoom: CSS zoom leaves getBoundingClientRect and clientX in zoomed pixels while offsets, scrollTop and 100vh are not, and app.js, routing.js and library.js place menus, popovers and the panel's height by those measures; under the webview's zoom the page is laid out again in fewer, larger CSS pixels and every measure agrees. Windows and Linux use Wails' SetZoom (WebView2's zoom factor, WebKitGTK's zoom level; the Zoom window option at creation, so the pages open at the saved size), the Mac WKWebView.pageZoom through cgo (macOS 11+), since Wails' Mac zoom is magnification, which lays nothing out again. None is under 100% because Wails clamps SetZoom below 1 on Windows and Linux. The windows grow around the pages: the panel's width and the height its page asks for (still in CSS pixels) are multiplied by the zoom, capped at the screen's work area (textsize.go panelFrame), and resized at once when the size changes; the main window's minimum is 560×420 CSS pixels at the size, capped by the screen, so a window smaller than that grows. Runtime changes wait for the app to be ready (whenReady), and at startup the Mac applies the zoom once its webviews exist. The Mac header, drawn under the native traffic lights which do not grow, divides its height, left padding and the modal's top by --zoom (set from boot.js before the first paint and from the settings), so it stays 50 points tall and level with them. The shortcuts are Cmd on the Mac and Ctrl elsewhere (the other modifier does nothing), step through the sizes and 0 goes back to 100%, with a "Text size 125%" toast; in magpie web the row is hidden and the keys are left to the browser's own zoom. On Windows the page names its faces (html.win): Segoe UI Variable Text, Segoe UI, then Microsoft YaHei UI for Chinese rather than whatever WebView2 falls back to; the Mac and Linux stack is unchanged, and there is no automatic size bump. New strings in en and zh. Tested: internal/gui/tests/text-size.test.cjs in Chromium and WebKit, en and zh, light and dark — a pick posts and does not scroll the settings page, stays picked after a reload with --zoom from boot.js, the Settings page's other saves leave it, the shortcuts step and reset in the window and the panel, and at 150% (the smallest window, 840×630 points, as 560×420 CSS pixels at device scale 1.5) no view, the header or the panel runs off to the side, the Mac header is 50 points; screenshots at 100% and 150% looked at. currency.test.cjs's viewport is 480 tall instead of 420, as settings-groups' is: the new row put the Currency control under the footer, where WebKit's hover could not reach it. Go: TestTextSizeFrames (panel and window sizes) and TestTextSizeSetting (the endpoint saves, zooms the windows, rejects 133, survives the general save, boot.js carries it) in internal/gui, and the settings round trip. go build -tags nogui (and GOOS=linux, GOOS=windows, plain darwin), go test -tags nogui ./... (TestUserPath flaked once under load and passes alone) and the whole GUI suite with --test-concurrency=2 pass. Not tried in the real Wails window on any platform: the Mac pageZoom, WebView2's zoom factor with the resized panel and the Windows font are untested there.
2026-09-30 02:51:17 +08:00
2026-09-25 02:19:32 +08:00
2026-09-25 02:19:32 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
groups: the groups magpie finds on its own can be switched off, in the Routing view and with magpie group auto off (蓝猫 on Discord: 路由分组会自动创建，可以关闭掉吗) — a model two or more providers serve always became an auto-<model> group, and one could only be removed at a time. A switch right under the routing groups' head, with what it does in words, and magpie group auto [on|off] now keep noAutoGroups in providers.json: off, no found group is listed, catalogued or served, and the groups the user made or changed stay; on, they are back, along with any the user had removed still removed. An agent set to a found group is moved to its model from one provider (the status line and the CLI say which), and a request that still names group/auto-<model> goes to that provider's model rather than failing. Switching off is refused while a group of the user's holds a found group as a member or classifier, so none is left pointing at nothing. TestAutoGroupsOff, TestAutoStandIn, TestAutoGroupsOffHeld, TestFoundGroupOff, TestReseatFoundGroupsOff and TestGroupsFoundSwitch fail without the change; group-found-off.test.cjs (Chromium, WebKit, en, zh), click-scroll and old-webkit pass. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass (TestUserPath a load flake, passes alone; TestClaudeSignedOut fails alone on main as well).
2026-10-02 02:24:49 +08:00
groups: the groups magpie finds on its own can be switched off, in the Routing view and with magpie group auto off (蓝猫 on Discord: 路由分组会自动创建，可以关闭掉吗) — a model two or more providers serve always became an auto-<model> group, and one could only be removed at a time. A switch right under the routing groups' head, with what it does in words, and magpie group auto [on|off] now keep noAutoGroups in providers.json: off, no found group is listed, catalogued or served, and the groups the user made or changed stay; on, they are back, along with any the user had removed still removed. An agent set to a found group is moved to its model from one provider (the status line and the CLI say which), and a request that still names group/auto-<model> goes to that provider's model rather than failing. Switching off is refused while a group of the user's holds a found group as a member or classifier, so none is left pointing at nothing. TestAutoGroupsOff, TestAutoStandIn, TestAutoGroupsOffHeld, TestFoundGroupOff, TestReseatFoundGroupsOff and TestGroupsFoundSwitch fail without the change; group-found-off.test.cjs (Chromium, WebKit, en, zh), click-scroll and old-webkit pass. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass (TestUserPath a load flake, passes alone; TestClaudeSignedOut fails alone on main as well).
2026-10-02 02:24:49 +08:00
2026-09-26 01:03:33 +08:00
2026-09-24 01:09:59 +08:00
2026-09-26 14:30:16 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
2026-09-24 17:13:03 +08:00
2026-10-01 21:28:54 +08:00
library: a project gets its own MCP servers, agent by agent (#500) — the library's servers could only be given to agents user-wide, while its skills could already go into a project. The MCP tab now lists the same projects as Skills under "In projects" (add one by its folder, or the folder picker in the app), and a project's card opens to each server with chips for the agents that read a project's own servers: Claude Code .mcp.json, Codex .codex/config.toml, Gemini CLI .gemini/settings.json, Cursor .cursor/mcp.json, OpenCode opencode.json (opencode.jsonc when that is the project's file), each as its docs give it. Other agents have no chip and are named under the card; the project files of Copilot, Crush, Droid, Kimi and the rest weren't confirmed, so none is written. The server is written with the same encoders and edit helpers as the user-wide files, so the rest of a file (its comments, other keys, the team's own servers) is kept; magpie records what it wrote in the project (Project.Servers, Wrote, MadeFiles) and only ever takes that away again, a same-named server that isn't magpie's is left as it is and named as a problem, as is an SSE server for Codex. A file magpie made is listed in the project's .gitignore between magpie's lines (a server's env and headers can hold keys) and removed with its folders once nothing of magpie's is left in it, unless the user wrote something else into it; a file that was there already is never ignored or removed. Renaming a library server renames it in its projects, removing it takes it out of them, and removing a project takes out its servers as well as its skills. A project whose MCP file is an agent's user-wide file (the home folder) is refused, as for skills. The chips of a project row (servers and skills) now light at once and send one write at a time, the last click winning: two quick clicks posted the first's stale list before. Claude Code still asks before it starts a project's servers and Codex reads .codex/config.toml only in a trusted project; the card says so. library-all.test.cjs gets a 800px-high window: the MCP tab's new "In projects" made it overflow 700 by a pixel, and Chromium's scroll anchoring then moved it when the problems card came in above. TestProjectServers (merge into a user's .mcp.json keeping its comment, key and server; Codex TOML; .gitignore; rename; removal down to the made folders; RemoveProject keeping the user's own), TestProjectServerNotOurs, TestProjectServerFileKept, TestProjectServerChecks and TestProjectServerOpenCodeJSONC run in a temp HOME; project-servers.test.cjs (en, zh; chromium and webkit) checks the chips, the greyed Codex chip for SSE, two clicks before magpie answers, and that nothing scrolls. No real agent was started on a written project. go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass; the library's Playwright tests pass in webkit, and in chromium except list-sort, shared-skills and import-all-skills, which fail the same way at HEAD.
2026-10-02 12:37:07 +08:00
gui: the Mac window opens on the Space you are on, and closing it in full screen leaves no black Space (StringKe on Discord) — magpie keeps no window position, so what stuck was macOS's own: the window, made with only full-screen-primary, belonged to the Space it was last shown on and Open took the user there; restarted to update while another app was full screen, it joined that app's Space for good. It now also moves to the active Space whenever shown (130, can still go full screen: checked in AppKit, enter and exit both report). Closing a full-screen window hid it where it was, leaving its full-screen Space empty and black; it now leaves full screen first and hides on WindowDidExitFullScreen (3s fallback), and an Open meanwhile keeps it. TestMainWindowFollowsActiveSpace and TestCloseStepLeavesFullscreen fail without the change. go vet, go build (darwin GUI), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass.
2026-09-30 18:41:10 +08:00
gui: the Mac window opens on the Space you are on, and closing it in full screen leaves no black Space (StringKe on Discord) — magpie keeps no window position, so what stuck was macOS's own: the window, made with only full-screen-primary, belonged to the Space it was last shown on and Open took the user there; restarted to update while another app was full screen, it joined that app's Space for good. It now also moves to the active Space whenever shown (130, can still go full screen: checked in AppKit, enter and exit both report). Closing a full-screen window hid it where it was, leaving its full-screen Space empty and black; it now leaves full screen first and hides on WindowDidExitFullScreen (3s fallback), and an Open meanwhile keeps it. TestMainWindowFollowsActiveSpace and TestCloseStepLeavesFullscreen fail without the change. go vet, go build (darwin GUI), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass.
2026-09-30 18:41:10 +08:00
omarchy: on Omarchy, magpie is drawn in Omarchy's own design language, follows its theme, drops its panel under the bar as Omarchy's own menus do, and can put its icon in Omarchy's bar (让整个UI/UX完全符合Omarchy的设计语言…单独对Omarchy做这个支持，现在的UI/UX当然要保留) — on Hyprland magpie looked like any other GTK app: its own light/dark palette, rounded shadowed popups, and a tray panel floated framed and dimmed in the middle of the screen, labelled with the program's name, never closing on a click elsewhere (focus follows the mouse there, so Wails turns off focus-lost hiding), and its tray icon was hidden in the bar's drawer. Now, only when Omarchy is detected (internal/omarchy: ~/.local/share/omarchy and its current theme), boot.js hands the page the current theme (colors.toml, the shell's theme TOML, Hyprland's border size, colour and rounding, Omarchy's font) as CSS variables before the first paint, and omarchy.css, all under html.omarchy, draws flat as Omarchy's shell does: the theme's background, no shadows or blur, corners as round as Hyprland's windows, popups and dialogs framed by the active border's colour, uppercase letter-spaced labels, rows and picks as a faint fill with the text in the accent. /api/omarchy is polled every 2.5s, so a theme picked in Omarchy's menu reaches the windows at once; Settings → Appearance shows the theme's name instead of Light/Dark/System. Under Hyprland the tray panel gets a title of its own ("magpie panel", set through GTK since Wails leaves frameless windows untitled), and each opening gives Hyprland a named Lua window rule placing it under the bar at the click, 6px in from the edges, pinned, opaque, borderless; its height is capped to the work area. While it is open a non-consuming left-click bind emits a custom event on Hyprland's socket2; a click outside the panel and below the bar closes it (the bar is left to its icons, so the icon toggles), and the bind is removed on close or, after Escape, on the next click. The tray item's SNI id is "magpie" instead of "Wails", so it can be pinned. Settings → Bar icon (状态栏图标), shown only in the app on Omarchy's Hyprland, puts an Omarchy bar-widget plugin (usemagpie.magpie, a bird glyph, in ~/.config/omarchy/plugins, then rescanPlugins and plugin enable) beside Omarchy's own icons: a click runs magpie panel, a right-click magpie app; Off disables and removes it; a widget pointing at a moved or older magpie is rewritten at start. magpie panel (new) opens the quick panel, starting magpie if needed, or toggles it in the running instance. Elsewhere nothing changes. Tested in a Hyper-V VM on the latest Omarchy (Hyprland 0.56, 2528×960 at scale 1.6): the look with tokyo-night; the panel at [1134,32] under the bar; clicks on the panel and the bar keep it open, a click on another window closes it, the icon toggles it, Escape closes it and the bind goes; Bar icon On adds the bird to the bar, its click opens the panel under it (also with magpie not running), a second click closes it, right-click opens the window, Off removes it; autostart becomes app-magpie@autostart through systemd's XDG generator; the launcher entry and icon are there. Go: internal/omarchy tests (theme parsing, panel placement on scaled and turned monitors, click-outside geometry, widget files quoted with the executable, KeepWidget rewriting only a stale one). A new internal/gui/tests/omarchy.test.cjs, Chromium and WebKit, en and zh: with no Omarchy theme the page has no omarchy class or theme style, the Appearance choices show, no Bar icon row, nothing asked of /api/omarchy; with one, the theme's background, square corners, its name, and Bar icon's On and Off each posted with nothing scrolled, hidden when the bar isn't there. old-webkit now lets omarchy.js load in the head beside boot.js (it does nothing off Omarchy). The full GUI suite, gofmt, go vet, go build (GOOS=linux, GOOS=windows) and go test -tags nogui ./... pass. Not tried: other Hyprland setups than Omarchy's, a multi-monitor VM, and the GTK4 build in the VM (gtk3 was used).
2026-09-30 04:58:11 +08:00
2026-10-02 01:51:04 +08:00
gui: the Windows tray panel no longer shows a faint close X over its Settings gear — its caption buttons are hidden there (#238 mintonight: a blurry red X at the panel's top-right corner, just above and right of the gear) — Wails v3 makes a frameless window on Windows WS_OVERLAPPEDWINDOW and, for the shadow and round corners, extends DWM's frame into the whole client area; the panel left its close button at the zero value, ButtonEnabled, which sets WS_SYSMENU, so DWM drew the caption's close X into that extended frame at the window's top right, and with the panel translucent (BackgroundTypeTranslucent, WS_EX_NOREDIRECTIONBITMAP, a see-through webview) it showed through the page, faint, over the gear. It was not the page: #winclose is removed everywhere but Linux's window, and is a grey pill in the header row. The panel's options move into panelOptions(goos, theme), unchanged, and on Windows its close, minimise and maximise buttons are ButtonHidden, which takes WS_SYSMENU and the min/max boxes off, so DWM has no caption buttons to draw; DisableFramelessWindowDecorations stays off, so the shadow and Windows 11's round corners stay. The Mac and Linux get the same options as before (their button states left at the zero value), and the main window is not touched. Tested with a new internal/gui/panel_options_test.go (!nogui): on windows the three buttons are hidden and the panel still frameless, translucent, off the taskbar and decorated; on darwin and linux the buttons are as before and URL, backdrop and corner radius unchanged; run on the Mac and compiled for Windows (GOOS=windows go test -c). go build -tags nogui (and GOOS=linux), GOOS=windows go build and go test -tags nogui ./... pass (TestUserPath, TestClaudeSignedOut and TestClaudeAccountNamedAsItsLogin timed out once at a load average near 60 and pass alone). Not tried on a real Windows desktop: that DWM stops drawing the X without WS_SYSMENU is from the Win32 custom-frame behaviour and Wails' code, not seen.
2026-09-30 02:15:48 +08:00
plugins: the Plugins page is drawn in parts, Installed at once and npm's figures after (#488: the page showed skeletons for seconds, even on Installed) — the page waited on /api/plugins/market, which answered only once the plugin host, the registry fetch and an npm request for every package (two each, 8s apiece, all at once, kept an hour in memory only) had all come back, so the slowest package decided when anything was drawn. The page now asks for each part on its own, as the Library page does: Installed is drawn from GET /api/plugins as soon as it answers; Discover's cards from the new GET /api/plugins/listings (the registry, with its cached and built-in copies), each with what npm said last; and versions, weekly downloads and an installed plugin's "v… out" fill in from the new GET /api/plugins/npm?names=…, never waited on (a card's button waits, disabled, until npm has said whether it has the package). npm is asked at most six packages at a time and for no more than 8s in all; a package it answers late is what it said last, and its answer is kept for the next time. What npm said is kept on disk (~/.cache/magpie/plugin-npm.json) beside the registry's copy, so a magpie just started shows it before asking, and GET /api/plugins gives each plugin's newest version from it. /api/plugins/market still answers the whole market as before. Once loaded the page shows what it did. TestNPMInfoKeptOnDisk, TestNPMInfoDeadline, TestNPMInfoAtOnce, TestPluginMarketInParts and plugin-progressive.test.cjs (Chromium, WebKit; en, zh; Installed while the market is held pending) fail without the change; plugin-local, plugin-updates, plugin-market, plugin-move, plugin-move-overflow, plugin-release, plugin-git, plugin-key-hint, plugin-plan, list-sort, click-scroll, old-webkit pass. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass.
2026-10-02 08:20:32 +08:00
2026-10-01 18:46:56 +08:00
plugins: the Plugins page is drawn in parts, Installed at once and npm's figures after (#488: the page showed skeletons for seconds, even on Installed) — the page waited on /api/plugins/market, which answered only once the plugin host, the registry fetch and an npm request for every package (two each, 8s apiece, all at once, kept an hour in memory only) had all come back, so the slowest package decided when anything was drawn. The page now asks for each part on its own, as the Library page does: Installed is drawn from GET /api/plugins as soon as it answers; Discover's cards from the new GET /api/plugins/listings (the registry, with its cached and built-in copies), each with what npm said last; and versions, weekly downloads and an installed plugin's "v… out" fill in from the new GET /api/plugins/npm?names=…, never waited on (a card's button waits, disabled, until npm has said whether it has the package). npm is asked at most six packages at a time and for no more than 8s in all; a package it answers late is what it said last, and its answer is kept for the next time. What npm said is kept on disk (~/.cache/magpie/plugin-npm.json) beside the registry's copy, so a magpie just started shows it before asking, and GET /api/plugins gives each plugin's newest version from it. /api/plugins/market still answers the whole market as before. Once loaded the page shows what it did. TestNPMInfoKeptOnDisk, TestNPMInfoDeadline, TestNPMInfoAtOnce, TestPluginMarketInParts and plugin-progressive.test.cjs (Chromium, WebKit; en, zh; Installed while the market is held pending) fail without the change; plugin-local, plugin-updates, plugin-market, plugin-move, plugin-move-overflow, plugin-release, plugin-git, plugin-key-hint, plugin-plan, list-sort, click-scroll, old-webkit pass. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass.
2026-10-02 08:20:32 +08:00
profiles: a click on a profile shows what it holds, and its Apply applies it (#467 emo172: a saved profile could only be seen by applying it over the setup in use) — a profile's chip applied it at once, and all the page knew of it was a one-line summary of its models. The state now carries each profile's fields by agent, under the agents' names and the fields' labels, in the order magpie lists them, with the Library's servers, skills and instructions each agent gets (not the instructions' text); a value that reads as a key or a token (a field named for one, a known key prefix, a long run of letters and digits) is sent as hidden, never its text. A click on a chip opens its details under its line in the window, and over it in the tray panel with Apply at their foot by the chip, the chip clicked staying where it is; opening them changes nothing, a second click closes them, Apply applies the profile; ↻ and × stay on the chip. In English and Chinese. TestDetails and TestStateProfileDetails fail without the change, as does profile-details.test.cjs (Chromium and WebKit, en and zh, window and panel). go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass (TestFXInState's TempDir cleanup flakes with or without the change); profile-details, panel-profiles, click-scroll, old-webkit pass.
2026-10-02 03:09:42 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
gui: built-in subscriptions that have a community plugin are marked Deprecated, with the reason — some subscriptions are reached in ways their vendors' terms may not allow, so to keep magpie itself from being banned they are being decoupled from magpie and run by community plugins instead. The provider list's quiet "can run on community plugins" line is now a deprecation notice (an amber card with the plugin mark: the deprecated signed-in subscriptions, the reason, that moving keeps accounts, models and agents, and Review in Plugins — or Review the move for one — beside Not now, which hides it until another deprecated subscription signs in). Their rows, their Add tiles (signed in or not; /api/providers' new movable lists every built-in with a plugin, from provider.MovableIDs) and the editor's Runs on field carry an outlined Deprecated badge whose tooltip gives the reason; the Add sheet's Subscriptions end with a line saying why, with Browse plugins. A subscription already on its plugin, or one with no plugin, carries none. deprecated-subscriptions.test.cjs (Chromium and WebKit, en and zh: the badges, their reason, none on a moved or keyed provider, the notice, Not now staying hidden), plugin-move and plugin-movable-review updated to the notice. add-button, add-sheet, mobile-web, old-webkit, plugin-move-overflow, plugin-moved-signin, plugin-market, plugin-signin, plugin-plan, provider-search, provider-picks-stay, providers-off-fold pass (click-scroll's 5 failures fail on main as well). go vet ./internal/..., go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./internal/provider/ ./internal/gui/ pass.
2026-10-02 11:39:05 +08:00
2026-10-02 00:46:45 +08:00
usage: a notification when a window is nearly used up or a balance runs low (#368) — Settings has Usage alert (off, or a share of 1–100%, 80 by default) and Low balance alert (off, or an amount, 5 by default), and magpie quota alert sets them from the command line. Each subscription or plan window, other than one set aside, is told once a run when it reaches the share, and a balance once until topped up past the amount again; what was said is kept, so a restart doesn't say it again, and a failed or stale reading neither alerts nor clears. The system's notifications are started only when first needed, so a Mac build that can't have them or a Linux desktop without a daemon still starts, and Settings says when they are refused or unavailable; a click opens the Usage page. TestDueAlerts and friends, TestAlertText and usage-alert.test.cjs fail without the change.
2026-10-01 04:16:28 +08:00
usage: a notification when a window is nearly used up or a balance runs low (#368) — Settings has Usage alert (off, or a share of 1–100%, 80 by default) and Low balance alert (off, or an amount, 5 by default), and magpie quota alert sets them from the command line. Each subscription or plan window, other than one set aside, is told once a run when it reaches the share, and a balance once until topped up past the amount again; what was said is kept, so a restart doesn't say it again, and a failed or stale reading neither alerts nor clears. The system's notifications are started only when first needed, so a Mac build that can't have them or a Linux desktop without a daemon still starts, and Settings says when they are refused or unavailable; a click opens the Usage page. TestDueAlerts and friends, TestAlertText and usage-alert.test.cjs fail without the change.
2026-10-01 04:16:28 +08:00
usage: a notification when a window is nearly used up or a balance runs low (#368) — Settings has Usage alert (off, or a share of 1–100%, 80 by default) and Low balance alert (off, or an amount, 5 by default), and magpie quota alert sets them from the command line. Each subscription or plan window, other than one set aside, is told once a run when it reaches the share, and a balance once until topped up past the amount again; what was said is kept, so a restart doesn't say it again, and a failed or stale reading neither alerts nor clears. The system's notifications are started only when first needed, so a Mac build that can't have them or a Linux desktop without a daemon still starts, and Settings says when they are refused or unavailable; a click opens the Usage page. TestDueAlerts and friends, TestAlertText and usage-alert.test.cjs fail without the change.
2026-10-01 04:16:28 +08:00
2026-10-01 20:50:15 +08:00
windows: the desktop app no longer opens a console window for every command it runs (#54) — it is linked as a GUI program and has no console, so each console CLI it started (devin auth status and models list, devin acp for every Devin turn, claude, codex, cursor-agent and grok probes and runs, grok login) was given a new console by Windows, and a Windows Terminal window with it, some every few seconds while the app sat idle. Every command magpie runs is now made through internal/proc, which starts it with CREATE_NO_WINDOW when magpie has no console of its own: the child gets a console without a window, and its output, which magpie always pipes back, arrives as before. A magpie run in a terminal (magpie serve, the TUI, the desktop app started from one with a command) has one, and its children share it as they did, so Ctrl+C there still reaches them. The relaunch after an update keeps its DETACHED_PROCESS, added to rather than replacing the flags it was made with, and a test fails on any command made with os/exec directly, so a new one can't bring the windows back
2026-09-25 14:04:44 +08:00
2026-09-24 12:17:45 +08:00
2026-09-24 12:17:45 +08:00
sessions: a session in magpie's trash can be erased for good, one at a time or the whole trash, after magpie's own dialog (#487: no way to empty the trash but removing its folder by hand) — the Sessions page's Trash only restored, and said magpie never erases what is in it: remove the folder yourself. Each trashed row now has Delete forever and the Trash an Empty trash, with the count of what is in it; both ask in magpie's dialog, as Delete does (never confirm()), naming the sessions, and Cancel sends nothing. They post /api/sessions/purge with the rows' keys, or all for every session the trash lists; each key is checked as Restore checks it (<agent>/<name>, an agent magpie deletes for, no separators, no . or ..), and its folder, and its agent's, must be real folders in <magpie dir>/trash/sessions, not links, with the session's note (session.json) in it; only that folder goes, its note with it, so the trash lists it no more. Nothing is erased by itself: the note under the Trash now says they are kept until erased there, and magpie never erases them by itself. TestPurgeOne, TestPurgeAll, TestPurgeRefusesOutOfTrash, TestSessionsPurgeRoute and sessions-purge.test.cjs (Chromium, WebKit; en, zh) fail without the change. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass (TestFXInState failed once under load, passes alone and in its package); sessions-manage, sessions-toolbar, click-scroll, old-webkit pass.
2026-10-02 08:20:33 +08:00
sessions: a session in magpie's trash can be erased for good, one at a time or the whole trash, after magpie's own dialog (#487: no way to empty the trash but removing its folder by hand) — the Sessions page's Trash only restored, and said magpie never erases what is in it: remove the folder yourself. Each trashed row now has Delete forever and the Trash an Empty trash, with the count of what is in it; both ask in magpie's dialog, as Delete does (never confirm()), naming the sessions, and Cancel sends nothing. They post /api/sessions/purge with the rows' keys, or all for every session the trash lists; each key is checked as Restore checks it (<agent>/<name>, an agent magpie deletes for, no separators, no . or ..), and its folder, and its agent's, must be real folders in <magpie dir>/trash/sessions, not links, with the session's note (session.json) in it; only that folder goes, its note with it, so the trash lists it no more. Nothing is erased by itself: the note under the Trash now says they are kept until erased there, and magpie never erases them by itself. TestPurgeOne, TestPurgeAll, TestPurgeRefusesOutOfTrash, TestSessionsPurgeRoute and sessions-purge.test.cjs (Chromium, WebKit; en, zh) fail without the change. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass (TestFXInState failed once under load, passes alone and in its package); sessions-manage, sessions-toolbar, click-scroll, old-webkit pass.
2026-10-02 08:20:33 +08:00
2026-09-30 02:36:12 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
archive: a request the archive kept is opened and downloaded from the Usage page, with its bodies whole (jorben, #447: 请求存档 reachable from usage history, full bodies, download) — the archive's name was only on the Gateway page's recent calls, gone once a call left the list or the gateway restarted, and the archive kept the first 256 KB of each body, the recent list's cut. The usage ledger's row now names the call's archive (archive in usage.jsonl, kept through the Requests page's packed rows), and its details on Usage → Requests show the Request archive panel, Fetch from archive and Download; with the archive on, a request it has no copy of says "Not archived". The bodies are kept whole up to requestArchiveMaxMB in settings.json (32 MB unless set, at most 1024): the response is teed to a temp file as it is sent, the request body written to one when the call ends, so the upload queue holds file handles, not bodies, and one upload at a time reads them; a body past the limit is kept to it and marked cut, with its whole size. What goes upstream is unchanged, the archive stays off unless turned on, headers and bodies are scrubbed as before, and the temp files are removed after the upload or when the queue is full. The page is sent a body to show only when it is 256 KB or less (a longer one is said by its size), an archive over 80 MB is only said to be; Download streams the object whole, to Downloads in the app (archive/export, -2, -3… for a name taken) and as the browser's download in magpie web (archive/file). TestArchiveWholeBodies, TestArchiveLimit, TestRowKeepsArchive and TestArchivePreviewAndDownload fail without the change; TestArchiveOffUsage, TestArchiveTooLargeToPreview, TestArchiveOldPreview keep the rest. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass; request-archive-usage (new), request-archive, click-scroll, old-webkit, usage-ledger, usage-ledger-detail, usage-ledger-content, web-page, sse-body pass.
2026-10-02 00:57:51 +08:00
2026-10-01 17:42:10 +08:00
gui: the tray menu is in the page's language (#301: 界面设为中文，托盘菜单仍是英文) — its lines were English in Go, which never read the language setting. Open, Version, Restart to Update (to v) and Quit now follow Settings › Language: en or zh as set, with System the system's (macOS AppleLanguages, Windows' preferred UI language, LANG elsewhere), Chinese for any zh; changing it in Settings relabels the menu at once. TestTrayMenuLabels and TestSettingsLangRelabelsTray fail without the change. go vet, go build (darwin GUI), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass.
2026-09-30 17:44:44 +08:00
gui: the tray menu is in the page's language (#301: 界面设为中文，托盘菜单仍是英文) — its lines were English in Go, which never read the language setting. Open, Version, Restart to Update (to v) and Quit now follow Settings › Language: en or zh as set, with System the system's (macOS AppleLanguages, Windows' preferred UI language, LANG elsewhere), Chinese for any zh; changing it in Settings relabels the menu at once. TestTrayMenuLabels and TestSettingsLangRelabelsTray fail without the change. go vet, go build (darwin GUI), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass.
2026-09-30 17:44:44 +08:00
gui: the tray menu is in the page's language (#301: 界面设为中文，托盘菜单仍是英文) — its lines were English in Go, which never read the language setting. Open, Version, Restart to Update (to v) and Quit now follow Settings › Language: en or zh as set, with System the system's (macOS AppleLanguages, Windows' preferred UI language, LANG elsewhere), Chinese for any zh; changing it in Settings relabels the menu at once. TestTrayMenuLabels and TestSettingsLangRelabelsTray fail without the change. go vet, go build (darwin GUI), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass.
2026-09-30 17:44:44 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
2026-09-30 02:36:12 +08:00
2026-09-30 02:36:12 +08:00
2026-09-30 02:36:12 +08:00
2026-09-30 02:36:12 +08:00
2026-09-30 02:36:12 +08:00
2026-09-30 02:36:12 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
settings: a Text size preference (文字大小) that makes everything in magpie's windows larger, 100/110/125/150%, with Ctrl/Cmd + = − 0 in the window and the tray panel, and Windows' text drawn in its own UI faces (Discord, Clarence Dan: the font size is hard on the eyes on Windows) — Settings → Preferences gains a Text size row under Language whose pick posts to a new POST /api/settings/text-size (saved as settings.TextSize, validated against 100/110/125/150, 0 read as 100, and kept by the Settings page's general save, which never sends it). The size is each webview's own zoom, as a browser zooms, not CSS zoom: CSS zoom leaves getBoundingClientRect and clientX in zoomed pixels while offsets, scrollTop and 100vh are not, and app.js, routing.js and library.js place menus, popovers and the panel's height by those measures; under the webview's zoom the page is laid out again in fewer, larger CSS pixels and every measure agrees. Windows and Linux use Wails' SetZoom (WebView2's zoom factor, WebKitGTK's zoom level; the Zoom window option at creation, so the pages open at the saved size), the Mac WKWebView.pageZoom through cgo (macOS 11+), since Wails' Mac zoom is magnification, which lays nothing out again. None is under 100% because Wails clamps SetZoom below 1 on Windows and Linux. The windows grow around the pages: the panel's width and the height its page asks for (still in CSS pixels) are multiplied by the zoom, capped at the screen's work area (textsize.go panelFrame), and resized at once when the size changes; the main window's minimum is 560×420 CSS pixels at the size, capped by the screen, so a window smaller than that grows. Runtime changes wait for the app to be ready (whenReady), and at startup the Mac applies the zoom once its webviews exist. The Mac header, drawn under the native traffic lights which do not grow, divides its height, left padding and the modal's top by --zoom (set from boot.js before the first paint and from the settings), so it stays 50 points tall and level with them. The shortcuts are Cmd on the Mac and Ctrl elsewhere (the other modifier does nothing), step through the sizes and 0 goes back to 100%, with a "Text size 125%" toast; in magpie web the row is hidden and the keys are left to the browser's own zoom. On Windows the page names its faces (html.win): Segoe UI Variable Text, Segoe UI, then Microsoft YaHei UI for Chinese rather than whatever WebView2 falls back to; the Mac and Linux stack is unchanged, and there is no automatic size bump. New strings in en and zh. Tested: internal/gui/tests/text-size.test.cjs in Chromium and WebKit, en and zh, light and dark — a pick posts and does not scroll the settings page, stays picked after a reload with --zoom from boot.js, the Settings page's other saves leave it, the shortcuts step and reset in the window and the panel, and at 150% (the smallest window, 840×630 points, as 560×420 CSS pixels at device scale 1.5) no view, the header or the panel runs off to the side, the Mac header is 50 points; screenshots at 100% and 150% looked at. currency.test.cjs's viewport is 480 tall instead of 420, as settings-groups' is: the new row put the Currency control under the footer, where WebKit's hover could not reach it. Go: TestTextSizeFrames (panel and window sizes) and TestTextSizeSetting (the endpoint saves, zooms the windows, rejects 133, survives the general save, boot.js carries it) in internal/gui, and the settings round trip. go build -tags nogui (and GOOS=linux, GOOS=windows, plain darwin), go test -tags nogui ./... (TestUserPath flaked once under load and passes alone) and the whole GUI suite with --test-concurrency=2 pass. Not tried in the real Wails window on any platform: the Mac pageZoom, WebView2's zoom factor with the resized panel and the Windows font are untested there.
2026-09-30 02:51:17 +08:00
omarchy: on Omarchy, magpie is drawn in Omarchy's own design language, follows its theme, drops its panel under the bar as Omarchy's own menus do, and can put its icon in Omarchy's bar (让整个UI/UX完全符合Omarchy的设计语言…单独对Omarchy做这个支持，现在的UI/UX当然要保留) — on Hyprland magpie looked like any other GTK app: its own light/dark palette, rounded shadowed popups, and a tray panel floated framed and dimmed in the middle of the screen, labelled with the program's name, never closing on a click elsewhere (focus follows the mouse there, so Wails turns off focus-lost hiding), and its tray icon was hidden in the bar's drawer. Now, only when Omarchy is detected (internal/omarchy: ~/.local/share/omarchy and its current theme), boot.js hands the page the current theme (colors.toml, the shell's theme TOML, Hyprland's border size, colour and rounding, Omarchy's font) as CSS variables before the first paint, and omarchy.css, all under html.omarchy, draws flat as Omarchy's shell does: the theme's background, no shadows or blur, corners as round as Hyprland's windows, popups and dialogs framed by the active border's colour, uppercase letter-spaced labels, rows and picks as a faint fill with the text in the accent. /api/omarchy is polled every 2.5s, so a theme picked in Omarchy's menu reaches the windows at once; Settings → Appearance shows the theme's name instead of Light/Dark/System. Under Hyprland the tray panel gets a title of its own ("magpie panel", set through GTK since Wails leaves frameless windows untitled), and each opening gives Hyprland a named Lua window rule placing it under the bar at the click, 6px in from the edges, pinned, opaque, borderless; its height is capped to the work area. While it is open a non-consuming left-click bind emits a custom event on Hyprland's socket2; a click outside the panel and below the bar closes it (the bar is left to its icons, so the icon toggles), and the bind is removed on close or, after Escape, on the next click. The tray item's SNI id is "magpie" instead of "Wails", so it can be pinned. Settings → Bar icon (状态栏图标), shown only in the app on Omarchy's Hyprland, puts an Omarchy bar-widget plugin (usemagpie.magpie, a bird glyph, in ~/.config/omarchy/plugins, then rescanPlugins and plugin enable) beside Omarchy's own icons: a click runs magpie panel, a right-click magpie app; Off disables and removes it; a widget pointing at a moved or older magpie is rewritten at start. magpie panel (new) opens the quick panel, starting magpie if needed, or toggles it in the running instance. Elsewhere nothing changes. Tested in a Hyper-V VM on the latest Omarchy (Hyprland 0.56, 2528×960 at scale 1.6): the look with tokyo-night; the panel at [1134,32] under the bar; clicks on the panel and the bar keep it open, a click on another window closes it, the icon toggles it, Escape closes it and the bind goes; Bar icon On adds the bird to the bar, its click opens the panel under it (also with magpie not running), a second click closes it, right-click opens the window, Off removes it; autostart becomes app-magpie@autostart through systemd's XDG generator; the launcher entry and icon are there. Go: internal/omarchy tests (theme parsing, panel placement on scaled and turned monitors, click-outside geometry, widget files quoted with the executable, KeepWidget rewriting only a stale one). A new internal/gui/tests/omarchy.test.cjs, Chromium and WebKit, en and zh: with no Omarchy theme the page has no omarchy class or theme style, the Appearance choices show, no Bar icon row, nothing asked of /api/omarchy; with one, the theme's background, square corners, its name, and Bar icon's On and Off each posted with nothing scrolled, hidden when the bar isn't there. old-webkit now lets omarchy.js load in the head beside boot.js (it does nothing off Omarchy). The full GUI suite, gofmt, go vet, go build (GOOS=linux, GOOS=windows) and go test -tags nogui ./... pass. Not tried: other Hyprland setups than Omarchy's, a multi-monitor VM, and the GTK4 build in the VM (gtk3 was used).
2026-09-30 04:58:11 +08:00
omarchy: on Omarchy, magpie is drawn in Omarchy's own design language, follows its theme, drops its panel under the bar as Omarchy's own menus do, and can put its icon in Omarchy's bar (让整个UI/UX完全符合Omarchy的设计语言…单独对Omarchy做这个支持，现在的UI/UX当然要保留) — on Hyprland magpie looked like any other GTK app: its own light/dark palette, rounded shadowed popups, and a tray panel floated framed and dimmed in the middle of the screen, labelled with the program's name, never closing on a click elsewhere (focus follows the mouse there, so Wails turns off focus-lost hiding), and its tray icon was hidden in the bar's drawer. Now, only when Omarchy is detected (internal/omarchy: ~/.local/share/omarchy and its current theme), boot.js hands the page the current theme (colors.toml, the shell's theme TOML, Hyprland's border size, colour and rounding, Omarchy's font) as CSS variables before the first paint, and omarchy.css, all under html.omarchy, draws flat as Omarchy's shell does: the theme's background, no shadows or blur, corners as round as Hyprland's windows, popups and dialogs framed by the active border's colour, uppercase letter-spaced labels, rows and picks as a faint fill with the text in the accent. /api/omarchy is polled every 2.5s, so a theme picked in Omarchy's menu reaches the windows at once; Settings → Appearance shows the theme's name instead of Light/Dark/System. Under Hyprland the tray panel gets a title of its own ("magpie panel", set through GTK since Wails leaves frameless windows untitled), and each opening gives Hyprland a named Lua window rule placing it under the bar at the click, 6px in from the edges, pinned, opaque, borderless; its height is capped to the work area. While it is open a non-consuming left-click bind emits a custom event on Hyprland's socket2; a click outside the panel and below the bar closes it (the bar is left to its icons, so the icon toggles), and the bind is removed on close or, after Escape, on the next click. The tray item's SNI id is "magpie" instead of "Wails", so it can be pinned. Settings → Bar icon (状态栏图标), shown only in the app on Omarchy's Hyprland, puts an Omarchy bar-widget plugin (usemagpie.magpie, a bird glyph, in ~/.config/omarchy/plugins, then rescanPlugins and plugin enable) beside Omarchy's own icons: a click runs magpie panel, a right-click magpie app; Off disables and removes it; a widget pointing at a moved or older magpie is rewritten at start. magpie panel (new) opens the quick panel, starting magpie if needed, or toggles it in the running instance. Elsewhere nothing changes. Tested in a Hyper-V VM on the latest Omarchy (Hyprland 0.56, 2528×960 at scale 1.6): the look with tokyo-night; the panel at [1134,32] under the bar; clicks on the panel and the bar keep it open, a click on another window closes it, the icon toggles it, Escape closes it and the bind goes; Bar icon On adds the bird to the bar, its click opens the panel under it (also with magpie not running), a second click closes it, right-click opens the window, Off removes it; autostart becomes app-magpie@autostart through systemd's XDG generator; the launcher entry and icon are there. Go: internal/omarchy tests (theme parsing, panel placement on scaled and turned monitors, click-outside geometry, widget files quoted with the executable, KeepWidget rewriting only a stale one). A new internal/gui/tests/omarchy.test.cjs, Chromium and WebKit, en and zh: with no Omarchy theme the page has no omarchy class or theme style, the Appearance choices show, no Bar icon row, nothing asked of /api/omarchy; with one, the theme's background, square corners, its name, and Bar icon's On and Off each posted with nothing scrolled, hidden when the bar isn't there. old-webkit now lets omarchy.js load in the head beside boot.js (it does nothing off Omarchy). The full GUI suite, gofmt, go vet, go build (GOOS=linux, GOOS=windows) and go test -tags nogui ./... pass. Not tried: other Hyprland setups than Omarchy's, a multi-monitor VM, and the GTK4 build in the VM (gtk3 was used).
2026-09-30 04:58:11 +08:00
omarchy: on Omarchy, magpie is drawn in Omarchy's own design language, follows its theme, drops its panel under the bar as Omarchy's own menus do, and can put its icon in Omarchy's bar (让整个UI/UX完全符合Omarchy的设计语言…单独对Omarchy做这个支持，现在的UI/UX当然要保留) — on Hyprland magpie looked like any other GTK app: its own light/dark palette, rounded shadowed popups, and a tray panel floated framed and dimmed in the middle of the screen, labelled with the program's name, never closing on a click elsewhere (focus follows the mouse there, so Wails turns off focus-lost hiding), and its tray icon was hidden in the bar's drawer. Now, only when Omarchy is detected (internal/omarchy: ~/.local/share/omarchy and its current theme), boot.js hands the page the current theme (colors.toml, the shell's theme TOML, Hyprland's border size, colour and rounding, Omarchy's font) as CSS variables before the first paint, and omarchy.css, all under html.omarchy, draws flat as Omarchy's shell does: the theme's background, no shadows or blur, corners as round as Hyprland's windows, popups and dialogs framed by the active border's colour, uppercase letter-spaced labels, rows and picks as a faint fill with the text in the accent. /api/omarchy is polled every 2.5s, so a theme picked in Omarchy's menu reaches the windows at once; Settings → Appearance shows the theme's name instead of Light/Dark/System. Under Hyprland the tray panel gets a title of its own ("magpie panel", set through GTK since Wails leaves frameless windows untitled), and each opening gives Hyprland a named Lua window rule placing it under the bar at the click, 6px in from the edges, pinned, opaque, borderless; its height is capped to the work area. While it is open a non-consuming left-click bind emits a custom event on Hyprland's socket2; a click outside the panel and below the bar closes it (the bar is left to its icons, so the icon toggles), and the bind is removed on close or, after Escape, on the next click. The tray item's SNI id is "magpie" instead of "Wails", so it can be pinned. Settings → Bar icon (状态栏图标), shown only in the app on Omarchy's Hyprland, puts an Omarchy bar-widget plugin (usemagpie.magpie, a bird glyph, in ~/.config/omarchy/plugins, then rescanPlugins and plugin enable) beside Omarchy's own icons: a click runs magpie panel, a right-click magpie app; Off disables and removes it; a widget pointing at a moved or older magpie is rewritten at start. magpie panel (new) opens the quick panel, starting magpie if needed, or toggles it in the running instance. Elsewhere nothing changes. Tested in a Hyper-V VM on the latest Omarchy (Hyprland 0.56, 2528×960 at scale 1.6): the look with tokyo-night; the panel at [1134,32] under the bar; clicks on the panel and the bar keep it open, a click on another window closes it, the icon toggles it, Escape closes it and the bind goes; Bar icon On adds the bird to the bar, its click opens the panel under it (also with magpie not running), a second click closes it, right-click opens the window, Off removes it; autostart becomes app-magpie@autostart through systemd's XDG generator; the launcher entry and icon are there. Go: internal/omarchy tests (theme parsing, panel placement on scaled and turned monitors, click-outside geometry, widget files quoted with the executable, KeepWidget rewriting only a stale one). A new internal/gui/tests/omarchy.test.cjs, Chromium and WebKit, en and zh: with no Omarchy theme the page has no omarchy class or theme style, the Appearance choices show, no Bar icon row, nothing asked of /api/omarchy; with one, the theme's background, square corners, its name, and Bar icon's On and Off each posted with nothing scrolled, hidden when the bar isn't there. old-webkit now lets omarchy.js load in the head beside boot.js (it does nothing off Omarchy). The full GUI suite, gofmt, go vet, go build (GOOS=linux, GOOS=windows) and go test -tags nogui ./... pass. Not tried: other Hyprland setups than Omarchy's, a multi-monitor VM, and the GTK4 build in the VM (gtk3 was used).
2026-09-30 04:58:11 +08:00
2026-09-30 11:22:21 +08:00
2026-09-30 11:22:21 +08:00
2026-10-01 17:42:10 +08:00
2026-10-01 20:50:15 +08:00
2026-09-30 18:31:08 +08:00
2026-09-30 18:31:08 +08:00
tray: every logo in the menu bar is drawn as a template image is, in the bar's text colour alone (the user: 当在 tray 上显示 agent 图标时，能否是去掉色彩满足 tray icon 样式的图标啊，而不是原样显示) — a coloured logo (Codex's blue tile, Claude's orange, Gemini's gradient, an app's PNG) was drawn as it is. Its shape is now what is opaque, less what is near white when the rest isn't, so a tile with a white glyph (Codex, ZCode, Kiro, WorkBuddy) is a tile of ink with the glyph cut out, light or dark. TestTrayImageMonoLogos (Codex, Claude, Gemini, ZCode, Alma; light and dark) fails without the change. go vet, go build (darwin GUI), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./..., go test ./internal/gui pass.
2026-10-02 11:01:28 +08:00
tray: every logo in the menu bar is drawn as a template image is, in the bar's text colour alone (the user: 当在 tray 上显示 agent 图标时，能否是去掉色彩满足 tray icon 样式的图标啊，而不是原样显示) — a coloured logo (Codex's blue tile, Claude's orange, Gemini's gradient, an app's PNG) was drawn as it is. Its shape is now what is opaque, less what is near white when the rest isn't, so a tile with a white glyph (Codex, ZCode, Kiro, WorkBuddy) is a tile of ink with the glyph cut out, light or dark. TestTrayImageMonoLogos (Codex, Claude, Gemini, ZCode, Alma; light and dark) fails without the change. go vet, go build (darwin GUI), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./..., go test ./internal/gui pass.
2026-10-02 11:01:28 +08:00
tray: the menu bar shows several subscriptions' usage side by side (KevinXC on Discord) — Settings → Usage in the menu bar picked one card; its menu now ticks any number (kept open while ticking, saved once when it closes, Off unticks all, a ticked card that has gone stays listed to untick) and the pill says "3 subscriptions". settings.TrayUsages keeps them in order; a file with only the older trayUsage shows that one, and trayUsage is still written as the first for an older magpie. On the Mac the bird and a cell per card are drawn as one image by AppKit on the status item's button: the card's logo (a black glyph tinted in the menu bar's text colour, a coloured one as it is, the name's letter in a ring when there is none) and its two windows stacked, "42%" over "18%", in the bar's colour light or dark and sharp at any scale; the bird's flap goes through it. Arc flags run into numbers (Codex's logo) are spaced out for AppKit's SVG reader. A row longer than 10 characters (a plan's balance read from its page) is cut with an ellipsis in the bar and whole in the tooltip. Windows and Linux show the cards as text, " | " between them. TestTrayUsageCells, TestSVGArcFlags, TestTrayImage (darwin, renders 0-3 cards light and dark at 2x), TestTrayUsagesMigrate and tray-usages.test.cjs (Chromium, WebKit, en/zh) are new. go vet, go build (darwin GUI), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./..., go test ./internal/gui pass; tray-usages, settings-groups, panel-*, click-scroll, old-webkit pass. Not seen in a live menu bar.
2026-09-30 19:45:44 +08:00
gui: the menu bar's usage can go without its logos (Jevin on Discord: 为什么托盘的额度显示要带小图标啊 反而丑了一些) — on the Mac each card in the menu bar was a small logo before its stacked percentages, with no way to drop it. Settings has a Menu bar logos On/Off row under Menu bar refresh (shown on a Mac with a card picked), On by default as before; Off draws each card as its percentages alone, a faint hairline between one card and the next, and the bar is redrawn at once. TestTrayPlain, TestTrayImagePlain and tray-logos.test.cjs (Chromium, WebKit, en/zh) fail without the change; tray-usages.test.cjs clicks Currency where it is, as Playwright otherwise scrolled to it under the footer now the row sits above it. go vet, go build (darwin GUI), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass; click-scroll, old-webkit, tray-usages, tray-inuse, settings-groups, usage-alert, update-hide, currency pass.
2026-10-01 12:26:05 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
gui: the tray menu is in the page's language (#301: 界面设为中文，托盘菜单仍是英文) — its lines were English in Go, which never read the language setting. Open, Version, Restart to Update (to v) and Quit now follow Settings › Language: en or zh as set, with System the system's (macOS AppleLanguages, Windows' preferred UI language, LANG elsewhere), Chinese for any zh; changing it in Settings relabels the menu at once. TestTrayMenuLabels and TestSettingsLangRelabelsTray fail without the change. go vet, go build (darwin GUI), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass.
2026-09-30 17:44:44 +08:00
tray: the menu bar shows several subscriptions' usage side by side (KevinXC on Discord) — Settings → Usage in the menu bar picked one card; its menu now ticks any number (kept open while ticking, saved once when it closes, Off unticks all, a ticked card that has gone stays listed to untick) and the pill says "3 subscriptions". settings.TrayUsages keeps them in order; a file with only the older trayUsage shows that one, and trayUsage is still written as the first for an older magpie. On the Mac the bird and a cell per card are drawn as one image by AppKit on the status item's button: the card's logo (a black glyph tinted in the menu bar's text colour, a coloured one as it is, the name's letter in a ring when there is none) and its two windows stacked, "42%" over "18%", in the bar's colour light or dark and sharp at any scale; the bird's flap goes through it. Arc flags run into numbers (Codex's logo) are spaced out for AppKit's SVG reader. A row longer than 10 characters (a plan's balance read from its page) is cut with an ellipsis in the bar and whole in the tooltip. Windows and Linux show the cards as text, " | " between them. TestTrayUsageCells, TestSVGArcFlags, TestTrayImage (darwin, renders 0-3 cards light and dark at 2x), TestTrayUsagesMigrate and tray-usages.test.cjs (Chromium, WebKit, en/zh) are new. go vet, go build (darwin GUI), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./..., go test ./internal/gui pass; tray-usages, settings-groups, panel-*, click-scroll, old-webkit pass. Not seen in a live menu bar.
2026-09-30 19:45:44 +08:00
providers, sign-in, tray, plugins: four of StringKe's reports on Discord — (1) Removing a provider left its editor open and listed, and a second Remove said there was no such provider: the removal had been made, but moving the agents off its models failed on one agent whose config couldn't be written, and Reseat returned that as the change's error; now such an agent is a move with its error ("still on X, not moved: …", a warning in the panel, a line in the CLI and TUI), the others are moved, and the panel, told a delete failed, re-reads the list and closes the editor when the provider is gone. (2) The sign-in waiting sheet shows the sign-in link itself, selected whole on a click, with a copy button, for a browser other than the one that opens. (3) A subscription with several accounts offers "Account in use" among the menu bar's usages, following the account the gateway goes to first. (4) The Antigravity plugin's sign-in never started: magpie called every plugin's authorize with an inputs object, the way OpenCode's CLI does, and opencode-antigravity-auth then asked its Project ID on the terminal — magpie's stdin — until the minute ran out; inputs now go only to a method with prompts, as OpenCode's TUI passes them (checked against the real package under Bun in a sandbox: the Google sign-in URL comes back at once). TestReseatUnmovable, TestTrayInUse, TestInUseOf, TestAuthorizeNoPrompts, provider-remove.test.cjs, signin-link.test.cjs and tray-inuse.test.cjs fail without the change. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass; click-scroll, old-webkit, tray-usages, plugin-signin, signin-callback, factory-sub pass.
2026-09-30 20:45:23 +08:00
gui: the menu bar's usage can go without its logos (Jevin on Discord: 为什么托盘的额度显示要带小图标啊 反而丑了一些) — on the Mac each card in the menu bar was a small logo before its stacked percentages, with no way to drop it. Settings has a Menu bar logos On/Off row under Menu bar refresh (shown on a Mac with a card picked), On by default as before; Off draws each card as its percentages alone, a faint hairline between one card and the next, and the bar is redrawn at once. TestTrayPlain, TestTrayImagePlain and tray-logos.test.cjs (Chromium, WebKit, en/zh) fail without the change; tray-usages.test.cjs clicks Currency where it is, as Playwright otherwise scrolled to it under the footer now the row sits above it. go vet, go build (darwin GUI), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass; click-scroll, old-webkit, tray-usages, tray-inuse, settings-groups, usage-alert, update-hide, currency pass.
2026-10-01 12:26:05 +08:00
usage: a custom balance's card says when it was read, shows each of its amounts on a line of its own and a percent as a meter (#420 by emo172: 余额卡片显示读取时间、百分比进度条) — a balance read from a provider's own Balance URL showed one line, "Balance $2.00 · Today $2.50 · Used 90%", and nothing said how old it was. magpie now hands the card the amounts the user's expression names, each with its label, and a "%" one's share; the Usage page shows each on a line of its own, the user's label quiet and the first amount the larger, "Balance" only where no label was given, and a percent as the quota meter, amber from 90%. Every card that was read says so, "Updated 3 minutes ago" (3分钟前更新), and one standing in for a reading that failed just now says "As of … — couldn't be read just now" (截至 …，暂时无法获取最新用量), allowance cards too. The menu bar panel's Balances show the same amounts and meter and an amber "As of" (截至), and the tray's tooltip adds "as of …, couldn't be read just now". One amount alone reads as it did, and the balance line, the CLI and the expression syntax are unchanged. No balance URL, path or site is added: /api/usage/token and unlimited_quota are one kind of relay's and stay the user's to write. TestBalanceParts, TestTrayUsageText and balance-parts.test.cjs fail without the change. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass; balance-parts, click-scroll, old-webkit, quota-families, panel-usage, tray-usages, balance-fix, usage-refresh, currency, claude-usage-asked pass.
2026-10-01 19:44:44 +08:00
gui: the menu bar's usage can go without its logos (Jevin on Discord: 为什么托盘的额度显示要带小图标啊 反而丑了一些) — on the Mac each card in the menu bar was a small logo before its stacked percentages, with no way to drop it. Settings has a Menu bar logos On/Off row under Menu bar refresh (shown on a Mac with a card picked), On by default as before; Off draws each card as its percentages alone, a faint hairline between one card and the next, and the bar is redrawn at once. TestTrayPlain, TestTrayImagePlain and tray-logos.test.cjs (Chromium, WebKit, en/zh) fail without the change; tray-usages.test.cjs clicks Currency where it is, as Playwright otherwise scrolled to it under the footer now the row sits above it. go vet, go build (darwin GUI), go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass; click-scroll, old-webkit, tray-usages, tray-inuse, settings-groups, usage-alert, update-hide, currency pass.
2026-10-01 12:26:05 +08:00
2026-10-02 09:37:00 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
settings: magpie's own update checks can be turned off, and run every 30 minutes, hour, six hours or day (#472: 更新行为可配置) — the app asked the feed five seconds after start and every six hours, a constant, and downloaded any newer version at once; with releases out most days, a version out just after a check waited up to six hours, and there was no way to stop the checks or the downloads they start (Update button only hides the pill). Settings → About has Automatic updates (on by default) and Check every (30 min, 1 h, 6 h, 24 h; 6 h with nothing set), kept in settings.json as noAutoUpdate and updateEvery, and magpie update auto [on|off] [30m|1h|6h|24h] sets them from the terminal. The updater reads them each minute and asks once the interval since the last check, its own or a click on Check, is up, and never by itself while off; the version row, not asked yet, then says automatic updates are off and offers Check. Check every stays in place, dimmed, while off, so the click doesn't shorten the page under it. TestUpdateDue, TestUpdateAskedAt and TestUpdateAutoCmd fail without the change, as does update-auto.test.cjs (Chromium, WebKit; en, zh). go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass; update-hide, update-check, whats-new, settings-groups, click-scroll, old-webkit pass.
2026-10-02 06:42:15 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
2026-09-26 21:00:33 +08:00
update: What's new and the waiting update's notes follow the app's language (freecss on Discord: 更新后的公告的语言是不是应该设置里面的走) — the release notes were English alone. A release's notes are to carry a Simplified Chinese translation below a <!-- lang:zh --> marker (the magpie-releases workflow, changed separately); usemagpie.ai's /api/latest and /api/notes take ?lang=zh for the Chinese where a release has it, and give anything else, an app from before included, the English alone, everything above the marker. The page asks /api/whatsnew, /api/update and /api/update/check in its own language (?lang=); magpie asks the site in it, keeps What's new's notes per language, and asks again for the waiting update's notes when a page's language isn't the one they are held in (at most once a minute); a check by itself asks in the pages' last language, else the app's, as the tray menu has it. Notes that come back whole (a site not yet deployed) are cut in the app too; notes without the marker (every release so far) are English, in either language. The worker must be deployed (npx wrangler deploy in site/) before the workflow change ships, or apps would get both languages. TestInLang, TestFeedsAskInLang, TestAskedLang, TestWhatsNewInPageLang, TestUpdateNotesInPageLang, site/worker.test.mjs (node --test site/worker.test.mjs), whats-new.test.cjs's language check (Chromium and WebKit, en and zh); update-check, update-hide, update-auto, sync-update pass in WebKit. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass (TestClaudeRunEndsWhenTheClientLeaves flaked once under the full run, passes alone; gateway untouched).
2026-10-02 11:31:11 +08:00
2026-10-01 17:42:10 +08:00
test: every package's tests pass on Windows, and none writes outside its sandbox (the user: 把 Windows 上那几个失败的测试修掉) — on a Windows box the suite failed in most packages, and the root package hung for 25 minutes. Tests set HOME, which os.UserHomeDir ignores on Windows (it reads USERPROFILE), so they read and wrote the runner's own home; each now sets USERPROFILE beside HOME, and Devin's, Goose's, Crush's and Claude Desktop's tests set APPDATA/LOCALAPPDATA, where those keep their files there. said() read the command's output only once it returned, and a pipe holds a few KB on Windows, so magpie model --help blocked forever; it reads while the command writes. Unix permission bits (the gateway key store's 0600 too), exec bits and symlinks Windows lacks are checked only off Windows; TOML strings hold Windows paths as literal strings, JSON as marshalled ones; a URL's path is compared as one. The provider and usage packages run in a home of their own (TestMain, as the gateway's already does), since a CLI's identity kept by a refresh still going when its test ended landed in the runner's ~/.config/magpie — and on a Mac in the user's own. Two product fixes came out of it: imagemcp took a file:///C:/… root or image for the path /C:/…, which doesn't exist on Windows, and now makes a Windows path of it (a host for a UNC share); and session discovery could keep a new Cowork session hidden on Linux, where a folder's mtime is a kernel tick and its size doesn't change, so an entry added within the tick of the last listing left both as they were — a listing made within 2s of its folder's last change is read again, as git does for racy files. TestFilePath and TestRacyDirectoryListedAgain fail without the change. On Windows 11 every package passes (32 of 32) and a run of each package in a fresh home leaves nothing in home, APPDATA or LOCALAPPDATA; on Linux (WSL) and macOS go test -tags nogui ./... passes. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build pass.
2026-10-01 23:15:07 +08:00
2026-10-01 21:28:54 +08:00
2026-10-01 21:49:15 +08:00
2026-09-27 17:26:32 +08:00
gui: after an update the window shows what changed since the version last run (a Discord user: 点更新后能弹个窗显示更新了啥吗, to see whether their issue was fixed) — magpie updated itself silently, and its release notes were only on GitHub. The version last run is now kept in magpie's own folder (last-version); started on a newer release, the window or magpie web's page asks usemagpie.ai's new /api/notes (beside /api/latest; site/worker.js lists the releases' notes from GitHub, cached as the feed is) for every release since, newest first, without their Install section, and shows them once in a What's new dialog. A fresh install, the same version, a downgrade or a build from source shows nothing; a magpie from before the version was kept, already in use, shows its own version's notes; offline nothing is shown and nothing waits on it; until the site is deployed, the update feed's newest notes stand in when they are the current version's. The tray's panel shows no dialog. The notes are drawn as text, never as HTML: headings, bullets, bold, code, http(s) links, and #NNN links to the issue, opened in the browser as the app's other links are. Settings has a What's new row under Version that opens them again, with a waiting update's notes first, marked Not installed yet; /api/update's notes leave out the Install section too. TestShowNotes, TestStripInstall, TestBetween, TestNotesBetween, TestWhatsNewAfterUpgrade, TestWhatsNewFromBefore, TestUpdateNotesWithoutInstall and whats-new.test.cjs (Chromium, WebKit, en, zh) fail without the change. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass; click-scroll, old-webkit, update-check, update-hide pass.
2026-10-02 03:57:55 +08:00
update: What's new and the waiting update's notes follow the app's language (freecss on Discord: 更新后的公告的语言是不是应该设置里面的走) — the release notes were English alone. A release's notes are to carry a Simplified Chinese translation below a <!-- lang:zh --> marker (the magpie-releases workflow, changed separately); usemagpie.ai's /api/latest and /api/notes take ?lang=zh for the Chinese where a release has it, and give anything else, an app from before included, the English alone, everything above the marker. The page asks /api/whatsnew, /api/update and /api/update/check in its own language (?lang=); magpie asks the site in it, keeps What's new's notes per language, and asks again for the waiting update's notes when a page's language isn't the one they are held in (at most once a minute); a check by itself asks in the pages' last language, else the app's, as the tray menu has it. Notes that come back whole (a site not yet deployed) are cut in the app too; notes without the marker (every release so far) are English, in either language. The worker must be deployed (npx wrangler deploy in site/) before the workflow change ships, or apps would get both languages. TestInLang, TestFeedsAskInLang, TestAskedLang, TestWhatsNewInPageLang, TestUpdateNotesInPageLang, site/worker.test.mjs (node --test site/worker.test.mjs), whats-new.test.cjs's language check (Chromium and WebKit, en and zh); update-check, update-hide, update-auto, sync-update pass in WebKit. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass (TestClaudeRunEndsWhenTheClientLeaves flaked once under the full run, passes alone; gateway untouched).
2026-10-02 11:31:11 +08:00
update: What's new and the waiting update's notes follow the app's language (freecss on Discord: 更新后的公告的语言是不是应该设置里面的走) — the release notes were English alone. A release's notes are to carry a Simplified Chinese translation below a <!-- lang:zh --> marker (the magpie-releases workflow, changed separately); usemagpie.ai's /api/latest and /api/notes take ?lang=zh for the Chinese where a release has it, and give anything else, an app from before included, the English alone, everything above the marker. The page asks /api/whatsnew, /api/update and /api/update/check in its own language (?lang=); magpie asks the site in it, keeps What's new's notes per language, and asks again for the waiting update's notes when a page's language isn't the one they are held in (at most once a minute); a check by itself asks in the pages' last language, else the app's, as the tray menu has it. Notes that come back whole (a site not yet deployed) are cut in the app too; notes without the marker (every release so far) are English, in either language. The worker must be deployed (npx wrangler deploy in site/) before the workflow change ships, or apps would get both languages. TestInLang, TestFeedsAskInLang, TestAskedLang, TestWhatsNewInPageLang, TestUpdateNotesInPageLang, site/worker.test.mjs (node --test site/worker.test.mjs), whats-new.test.cjs's language check (Chromium and WebKit, en and zh); update-check, update-hide, update-auto, sync-update pass in WebKit. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass (TestClaudeRunEndsWhenTheClientLeaves flaked once under the full run, passes alone; gateway untouched).
2026-10-02 11:31:11 +08:00
update: What's new and the waiting update's notes follow the app's language (freecss on Discord: 更新后的公告的语言是不是应该设置里面的走) — the release notes were English alone. A release's notes are to carry a Simplified Chinese translation below a <!-- lang:zh --> marker (the magpie-releases workflow, changed separately); usemagpie.ai's /api/latest and /api/notes take ?lang=zh for the Chinese where a release has it, and give anything else, an app from before included, the English alone, everything above the marker. The page asks /api/whatsnew, /api/update and /api/update/check in its own language (?lang=); magpie asks the site in it, keeps What's new's notes per language, and asks again for the waiting update's notes when a page's language isn't the one they are held in (at most once a minute); a check by itself asks in the pages' last language, else the app's, as the tray menu has it. Notes that come back whole (a site not yet deployed) are cut in the app too; notes without the marker (every release so far) are English, in either language. The worker must be deployed (npx wrangler deploy in site/) before the workflow change ships, or apps would get both languages. TestInLang, TestFeedsAskInLang, TestAskedLang, TestWhatsNewInPageLang, TestUpdateNotesInPageLang, site/worker.test.mjs (node --test site/worker.test.mjs), whats-new.test.cjs's language check (Chromium and WebKit, en and zh); update-check, update-hide, update-auto, sync-update pass in WebKit. go vet, go build -tags nogui (darwin, GOOS=linux), GOOS=windows go build, go test -tags nogui ./... pass (TestClaudeRunEndsWhenTheClientLeaves flaked once under the full run, passes alone; gateway untouched).
2026-10-02 11:31:11 +08:00
